SYSSYM=ALLOW In JES2 $JOBCLASS parameter. -----Original Message----- From: IBM Mainframe Discussion List <[email protected]> On Behalf Of Jousma, David Sent: Monday, March 9, 2020 3:19 PM To: [email protected] Subject: Re: System Sysmbolic
[CAUTION: This Email is from outside the Organization. Do not click links or open attachments unless you trust the sender.] Make sure the jobclass the job will run in allows for the use of system symbols...the old caveat still applies...symbol resolution at conversion time vs execution... _____________________________________________________________________________________________________ Dave Jousma AVP | Manager, Systems Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 ________________________________ From: IBM Mainframe Discussion List <[email protected]> on behalf of Steve Beaver <[email protected]> Sent: Monday, March 9, 2020 4:15:11 PM To: [email protected] <[email protected]> Subject: Re: System Sysmbolic **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** I'm more interested in DSN=LIBRARY.PDS(&SYSSYM) symbol substitution not a SYSIN DD *,SYMBOLS=JCLONLY -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of ITschak Mugzach Sent: Monday, March 9, 2020 3:05 PM To: [email protected] Subject: Re: System Sysmbolic )/ddname dd *,symbols=jclonly ITschak בתאריך יום ב׳, 9 במרץ 2020, 21:53, מאת Steve Beaver <[email protected] >: > How can you use a reference SYSTEM SYMBOLIC in an in-stream job? > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO IBM-MAINs > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ::DISCLAIMER:: ________________________________ The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ________________________________ ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
