I agree. By mistake both power cords lead to the same UPS, or even the same breaker. Pick a low impact time. Turn each breaker off for 1 minute then turn back on. Look for anything that went down and change outlets as needed. Then power off each UPS to check for different breakers but same UPS. Or isn't there a device that will send a signal over the line and you can determine which outlets are wired to that breaker? Or is that only phone / network lines?
On Thu, Oct 17, 2019 at 10:27 AM Tom Marchant <0000000a2a8c2020-dmarc-requ...@listserv.ua.edu> wrote: > > On Thu, 17 Oct 2019 11:41:24 +0400, Peter wrote: > > >We have a dual... connectivity from UPS wired to z14. > > > >Even if one goes down and another would take a control > > That's what you said. > > Some of us are skeptical that it is actually implemented the way > that you intended that it be implemented. > > -- > Tom Marchant > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
