Thank you Sir, I shall dig into this! – Vignesh Mainframe Infrastructure
-----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Peter Bishop Sent: 21 February 2019 02:30 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: [EXTERNAL] Re: Is there an HCD for Dummy's book anywhere? Hi Vignesh, to generate CHPID/CNTLUNIT/IODEVICE/EDT etc. statements as necessary, which are then input to the batch IOCP/MVSCP import job. Of course the sky's the limit with edit macros. I've tried to attach a sample; it's my first time so let's see if I did it right. It builds various statements to support the installation of a disk array that is attached via cascaded FICON switches, with two-byte link addressing, etc. I'm sure it could be improved by a willing reader; did the job for me at least. cheers, Peter On Wed, 20 Feb 2019 05:32:59 +0000, Sankaranarayanan, Vignesh <vignesh.v.sankaranaraya...@marks-and-spencer.com> wrote: >Hi Peter, > >Curious.. what sort of edit macros? > >– Vignesh >Mainframe Infrastructure > >-----Original Message----- >From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On >Behalf Of Peter Bishop >Sent: 20 February 2019 02:33 >To: IBM-MAIN@LISTSERV.UA.EDU >Subject: [EXTERNAL] Re: Is there an HCD for Dummy's book anywhere? > >Hi Tony, > >see the "Migrate configuration data" option, 5 from the main menu. I use it >with all the time, with edit macros to generate IOCP decks which I then >import. Saves a lot of hassle on the CTC definition screens and others that I >prefer not to use when I know I can code some IOCP instead. > >cheers >Peter > >On Tue, 19 Feb 2019 :0:40:22 -0500, Tony Thigpen <t...@vse2pdf.com> wrote: > >>You know, I can code an IOCP much faster. I just wish I could tell HCD >>to: "take this IOCP source, set everything up for me and ask me for >>any extra information HCD needs". >> >>Tony Thigpen >> >>Tony Thigpen wrote on 2/19/19 8:37 PM: >>> It suddenly dawned on me that I was miss-understanding "logical >>> address (same as CUADD)". I was reading it as "logical address which >>> will be set to the specified CUADD value" instead of "logical >>> address (which others call CUADD)". >>> >>> Duh! >>> >>> Tony Thigpen >>> >>> Neubert, Kevin wrote on 2/19/19 7:07 PM: >>>> Sounds like you have not gone far enough. >>>> >>>> After you add the CU, select the processor(s), should then have a >>>> panel with channel path IDs, unit address, logical address (same as >>>> CUADD), etc. >>>> >>>> If appropriate, might make a little more sense if you "add like" an >>>> existing VTL control unit. Values can still be tailored using this >>>> manner. >>>> >>>> Regards, >>>> >>>> Kevin >>>> >>>> -----Original Message----- >>>> From: IBM Mainframe Discussion List >>>> [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Tony Thigpen >>>> Sent: Tuesday, February 19, 2019 2:52 PM >>>> To: IBM-MAIN@LISTSERV.UA.EDU >>>> Subject: Is there an HCD for Dummy's book anywhere? >>>> >>>> The HCD panels are driving me crazy. >>>> >>>> I don't know if my eyeballs need replacing or if this is a 'they >>>> called it something else' problem. >>>> >>>> All I want to do is add a new control unit and some tapes for our >>>> VTL, but the control unit needs a specific CUADD= value and I just >>>> don't see any field on the panel that seems remotely where I would >>>> specify the CUADD= value. >>>> >>>> -- >>>> Tony Thigpen >>>> >>>> ------------------------------------------------------------------- >>>> - >>>> -- For IBM-MAIN subscribe / signoff / archive access instructions, >>>> send email to lists...@listserv.ua.edu with the message: INFO >>>> IBM-MAIN >>>> >>>> ------------------------------------------------------------------- >>>> - >>>> -- For IBM-MAIN subscribe / signoff / archive access instructions, >>>> send email to lists...@listserv.ua.edu with the message: INFO >>>> IBM-MAIN >>>> >>>> >>> >>> -------------------------------------------------------------------- >>> - >>> - For IBM-MAIN subscribe / signoff / archive access instructions, >>> send email to lists...@listserv.ua.edu with the message: INFO >>> IBM-MAIN >>> >>> >> >>---------------------------------------------------------------------- >>For IBM-MAIN subscribe / signoff / archive access instructions, send >>email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >---------------------------------------------------------------------- >For IBM-MAIN subscribe / signoff / archive access instructions, send >email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >MARKSDNDSPENCER.COM >________________________________ > Unless otherwise stated above: >Marks and Spencer plc >Registered Office: >Waterside House >35 North Wharf Road >London >W2 1NW > >Registered No. 214436 in England and Wales. > >Telephone (020) 7935 4422 >Facsimile (020) 7487 2670 > >www.marksandspencer.com > >Please note that electronic mail may be monitored. > >This e-mail is confidential. f you received it by mistake, please let us know >and then delete it from your system; you should not copy, disclose, or >distribute its contents to anyone nor act in reliance on this e-mail, as this >is prohibited and may be unlawful. > >---------------------------------------------------------------------- >For IBM-MAIN subscribe / signoff / archive access instructions, send >email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
