TN3270 is a different animal from HMC, whether line mode or 3270 mode. TN3270 
to an ICC looks like a local non-SNA 3270.


--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3

________________________________________
From: IBM Mainframe Discussion List <IBM-MAIN@listserv.ua.edu> on behalf of Tom 
Brennan <t...@tombrennansoftware.com>
Sent: Friday, October 5, 2018 11:52 AM
To: IBM-MAIN@listserv.ua.edu
Subject: Re: [EXTERNAL] Re: ZZSA question

I just tested ZZSA under Hercules and like I thought, when you connect
via Hercules TN3270 to simulate a console, after IPL no ZZSA messages
appear until you press Enter.  That means ZZSA sits waiting for an
interrupt from a 3270 device, and uses that device for the rest of the
communication.  To me, that means it works just like SADUMP, DFDSS, and
ICKDSF and there is no console configuration.

On 10/5/2018 8:20 AM, Dyck, Lionel B. (RavenTek) wrote:
> I've tested ZZSA under Hercules - Thanks to Sam Golob's fine work - but I 
> didn't see how to define a console as an HMC integretated console (hmcs) ?
>
> --------------------------------------------------------------------------
> Lionel B. Dyck (Contractor)  <sdg><
> Mainframe Systems Programmer – RavenTek Solution Partners
>
>
>
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On 
> Behalf Of Tom Brennan
> Sent: Friday, October 05, 2018 10:14 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: [EXTERNAL] Re: ZZSA question
>
> Oh... you mean HMC console.  New answer:  I did not try that, but prior to 
> going to that site I had never user ZZSA before so I tested it under 
> Hercules, and that simulates the HMC console I believe, so I'd bet the answer 
> is yes.
>
> On 10/5/2018 8:07 AM, Tom Brennan wrote:
>> I used (well mostly watched) ZZSA work via ICC with no problems.  That
>> was a couple of years ago on a new z13s with OSA 5S cards.
>>
>> On 10/5/2018 4:58 AM, Dyck, Lionel B. (RavenTek) wrote:
>>> Does anyone know if the ZZSA tool (stand alone utilities) on the
>>> CBTTape can use the HMC Integrated Console?
>>>
>>> ---------------------------------------------------------------------
>>> -----
>>>
>>> Lionel B. Dyck (Contractor)  <sdg><
>>> Mainframe Systems Programmer - RavenTek Solution Partners
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> - For IBM-MAIN subscribe / signoff / archive access instructions,
>>> send email to lists...@listserv.ua.edu with the message: INFO
>>> IBM-MAIN
>>>
>>>
>>
>> ----------------------------------------------------------------------
>> For IBM-MAIN subscribe / signoff / archive access instructions, send
>> email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>>
>>
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
> lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Reply via email to