We got
IEA303W ABEND 878 REASON 00000004 DURING
INITIALIZATION UNDER RIM IEAVNP23
OSC Index 12 connected to CPC4100A via IP
Addr 10.216.182.225:3270 **
LT Index=11 CSSID=00 MIFID=09 CU=0
UA=00 LUName=GMSTR **
Type=2965-N10 Mfg=IBM SN=0000000D2C07
message displayed during start up of GGGG.
at IPL over weekend on 2 of our LPARs.
For one, trying reipl worked fine. For the other we tried several times, no go.
RSU 1711 went into our 2.1 system. We searched on apars and found some old
ones mentioning to increase
ESQA. There was some miscommunication and we increased ECSA from 570M to 650M
for that one LPAR and it came
up just fine.
On further reading, it looks like if ESQA is exhausted, it might go to the ECSA.
So I have 2 questions
1). Anything we should look for on why this happened to us for the first time
at IPL? Our maintenance?
or the fact because of the maintenance we stopped PPRC during the IPLs. Also
we did update our ISV vendor software including CAs MIM. I know one of the old
APARs mentioned GRS.
2). I am concerned that increasing ECSA might cost us in some way. Will
this affect performance
or cause LPAR failure as we go along. I kind of looked at TMON for that LPAR
and this is what I see:
CSA: 3068K( 34%) ECSA: 650M( 29%)
SQA: 800K( 56%) ESQA: 47076K( 61%)
We lost our senior Performance Guy to retirement recently which is why I am out
here
asking for advice.
Thank you. Jess
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
