Is Z a held MSGCLASS? I really haven't used SPIN, so I can't help much. But, I really doubt you can successfully define the DD you desire. I don't think JES2 allows it.
> -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of venkat kulkarni > Sent: Wednesday, May 10, 2017 12:46 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: AW: Re: job output into dataset > > Below is my stc job class output > > RESPONSE=TST4 > > $HASP837 JOBCLASS(STC) > > $HASP837 JOBCLASS(STC) AUTH=(ALL),BLP=YES,COMMAND=EXECUTE, > > $HASP837 CONDPURG=YES,DSENQSHR=ALLOW, > > $HASP837 IEFUJP=YES,IEFUSO=YES,JESLOG=(SPIN, > > $HASP837 10K),LOG=YES,MSGLEVEL=(1,1), > > $HASP837 MSGCLASS=Z,OUTDISP=(WRITE,WRITE), > > $HASP837 OUTPUT=YES,PERFORM=000,PROCLIB=00, > > $HASP837 QAFF=(ANY),REGION=0004M,SWA=BELOW, > > $HASP837 TIME=(000120,00),TYPE26=YES, > > $HASP837 TYPE6=YES > > I looked at every possible document and I think the issue is, when I issue > spin > command , the process starts and spin records from dd but it never write on > output queue. > > So, what is stopping system to complete this spin process and should return > me $HASP138 of successful completion. > > I am still suspecting that do I need to have dd name entry in my proc which I > am using in my spin command with free=close and spin=unallocated > > Please help me to clear this doubt > > On 10-May-2017 10:26 AM, "Gibney, Dave" <gib...@wsu.edu> wrote: > > > I don't believe attempting to override the three JESxxxx files with a > > explicit DD definition will work. > > I think, but haven't confirmed that you can define the eligibility to > > spin those files in the definition of the STC or JOB Class to JES2. It > > probably take a JES2 command or COLD start to set these attributes. > > > > Looking at the appropriate manual(s) will help you as much or more as > > these questions here. > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of venkat kulkarni > > > Sent: Tuesday, May 09, 2017 11:25 PM > > > To: IBM-MAIN@LISTSERV.UA.EDU > > > Subject: Re: AW: Re: job output into dataset > > > > > > I feel, whatever DD name I want spin, I should code in proclib for > > example > > > : If I want to always spin JESMSGLG DD from address space then I > > > should code below line in proclib and then > > > > > > only my spin command will be completed. > > > > > > > > > > > > //JESMSGLG DD SYSOUT=A,FREE=CLOSE,SPIN=UNALLOC > > > > > > > > > > > > Please correct me, if I am wrong. > > > > > > > > > > > > 2) Currently, I don’t get $HASP138 message on my console after > > > starting SPIN command. I just get below command > > > > > > > > > > > > $T JQ(IMS12IMS),SPIN,DDNAME=JESMSGLG > > > > > > $HASP890 JOB(IMS12IMS) 103 > > > > > > $HASP890 JOB(IMS12IMS) STATUS=(EXECUTING/TST4),CLASS=STC, > > > > > > $HASP890 PRIORITY=15,SYSAFF=(TST4),HOLD=(NONE) > > > > > > > > > > > > So, I have doubt that my spin command is not getting completed or > > > some other reason. > > > > > > > > > > > > > > > > > > 3) After running this spin command, I don’t see any output in my > > > output queue. Even though i set my STC job class > > > > > > > > > > > > /$T JOBCLASS(STC),OUTDISP=(KEEP,KEEP) > > > > > > > > > > > > still, no output on output queue. > > > > > > > > > > > > > > > > > > 4) I see duplicate DD name like below after running SPIN command. Ex > > > JESMSGLG and JESYSMSG are showing me 2 times in this same address > > > space. > > > > > > > > > > > > SDSF JOB DATA SET DISPLAY - JOB IMS12IMS (STC02551) > > > > > > COMMAND INPUT ===> > > > > > > PREFIX=IMS12IMS DEST=(ALL) OWNER=* SYSNAME= > > > > > > NP DDNAME StepName ProcStep DSID Owner C Dest > > > > > > JESMSGLG JES2 2 STCCICQ Z > > > > > > JESJCL JES2 3 STCCICQ Z > > > > > > JESYSMSG JES2 4 STCCICQ Z > > > > > > JESYSMSG JES2 104 STCCICQ Z > > > > > > JESMSGLG JES2 108 STCCICQ Z > > > > > > > > > > > > > > > > > > Can you please help me to solve these queries. > > > > > > > > > > > > On 09-May-2017 8:16 PM, "Lizette Koehler" <stars...@mindspring.com> > > > wrote: > > > > > > > Venkat - > > > > > > > > > > > > You can SPIN SYSOUT (I do not think you can SPIN INTRDR ) > > > > > > > > Sometimes, the SYSOUT is not PURGED from the Job unless you have > > > > SPIN=CLOSE,FREE=UNALLOC. Otherwise the purge of the output will > > > > occur when the task is shut down. > > > > > > > > JES2 keeps a counter of output written. When it gets to a certain > > > > amount you will see S722 abends > > > > > > > > When you SPIN output it will go to the output class specified. > > > > > > > > For example, SYSOUT=B - When you spin it will go to the class B. > > > > Now if B is setup in JES2 as a HELD class or OUTPUT class is > > > > dependent on your shop's JES2 parm > > > > > > > > You can see the output that you SPIN in the SDSF Panels. Either > > > > the > > O > > > > ST H panels > > > > > > > > Once you spin the output you still need another process to write > > > > the data to a data set. > > > > > > > > Processes suggested so far > > > > Write an SDSF ISFEXEC REXX to read the Data from JES2 to > > > > dataset _ Example is JES2DISK > > > > Purchase a product to do this ($AVERS, VIEW DIRECT, XPTR, and > > > > so > > > > forth) > > > > Setup and External writer to read the data from Spool and > > > > write to a dataset > > > > Setup a JES2 Offloader to write the data to a dataset. > > > > Look for tools on cbttape.org > > > > > > > > > > > > > > > > Note: There are special DD statements that are generated by JES2 > > > > you cannot control with a JCL Statement to spin it. > > > > > > > > You could review the Manuals JES2 INIT and TUNING GUIDE, and JES2 > > > > INIT and TUNING Reference. They have good detail on how JES2 does > > > > output management. > > > > > > > > SA32-0991-00 z/OS JES2 Initialization and Tuning Guide > > > > SA32-0992-00 z/OS JES2 Initialization and Tuning Reference > > > > > > > > Next, find the REXX called JES2DISK. I use this all the time to > > > > read data from JES2 and write it to a dataset. It works very well. > > > > > > > > > > > > It is still not clear what problem you are trying to solve. > > > > > > > > > > > > If you could summarize what it is you need to do, it might be > > > > helpful to level set the issue at this time. There have been a > > > > lot of comments and suggestions which do not seem to meet your > needs. > > > > > > > > For example, my task needs to collect the data from STC x which > > > > runs 24x7. I need the information written to the DD statement Y. > > > > This needs to go into a GDG or SEQ files for later review. This > > > > output is a (REPORT, JCL, LOGGING, etc....) > > > > > > > > > > > > > > > > SPIN can happen at the TASK LEVEL - S stcname,SPIN=('spin parms') > > > > Or the DD level //DDxxxx DD SYSOUT=x,SPIN= > > > > OR by issuing a JES2 command $Tzzzzzz,SPIN zzzzzzz is either Task > > > > Number, TaskName > > > > > > > > Depending on the requirements you are provided, it will depend on > > > > which function you will need to use. > > > > > > > > > > > > The more specific the question, the better the answers. Generic > > > > questions or comments can lead to confusion for everyone. > > > > > > > > This list can provide lots of suggestions and guidance. It will > > > > be your job to work with the suggestions and see what works in your > shop. > > > > Each shop is different and what works for one does not always work > > > > for > > > another. > > > > > > > > > > > > > > > > Lizette > > > > > > > > > > > > > -----Original Message----- > > > > > From: IBM Mainframe Discussion List > > > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of venkat kulkarni > > > > > Sent: Tuesday, May 09, 2017 12:43 AM > > > > > To: IBM-MAIN@LISTSERV.UA.EDU > > > > > Subject: Re: AW: Re: job output into dataset > > > > > > > > > > Yes. It's not.so I should code jesmsglg dd stmt as //JESMSGLG dd > > > > > sysout=a,free=close,spin=unalloc > > > > > > > > > > in my ims proc and then recycle ims and then issue $t > > > > > job,imsproc,spin,ddname=JESMSGLG Command to spin JESMSGLG. > > > > > > > > > > Please correct me, if my understanding is wrong. > > > > > Also, suggest after this spin , how to remove those many record > > > > > from > > > > JESMSGLG > > > > > dd which we just spin . > > > > > > > > > > On 09-May-2017 9:40 AM, "Gibney, Dave" <gib...@wsu.edu> wrote: > > > > > > > > > > > There is no DD named JCLOUT. > > > > > > There is nothing (aside from the JESxxxxx) to SPIN. > > > > > > Why do you want to spin job? > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: IBM Mainframe Discussion List > > > > > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of venkat > > > > > > > kulkarni > > > > > > > Sent: Monday, May 08, 2017 10:44 PM > > > > > > > To: IBM-MAIN@LISTSERV.UA.EDU > > > > > > > Subject: Re: AW: Re: job output into dataset > > > > > > > > > > > > > > Hello All, > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for reply. I looked at my IMS proc and looks like below. > > > > > > > > > > > > > > > > > > > > > > > > > > > > BROWSE SYS1.DEVL.PROCLIB(IMS12IMS) - 01.05 Line > > 00000000 > > > > Col > > > > > > 001 > > > > > > > 080 > > > > > > > > > > > > > > Command ===> > > Scroll > > > > > > ===> > > > > > > > CSR > > > > > > > > > > > > > > ********************************* Top of Data > > > > > > > ****************************** > > > > > > > **** > > > > > > > > > > > > > > // PROC RGN=0M,SOUT=A, > > > > > > > > > > > > > > // SYS=,SYS2=, > > > > > > > > > > > > > > // RGSUF=DBC,PARM1='AUTO=N', > > > > > > > > > > > > > > // PARM2= > > > > > > > > > > > > > > //IEFPROC EXEC PGM=DFSMVRC0,REGION=&RGN, > > > > > > > > > > > > > > // PARM='DBC,&RGSUF,&PARM1,&PARM2' > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //STEPLIB DD DSN=IMS1.V120.&SYS2.SDFSRESL,DISP=SHR > > > > > > > > > > > > > > //PROCLIB DD DSN=IMS1.V120.&SYS2.PROCLIB,DISP=SHR > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //IMSIRD DD SYSOUT=(A,INTRDR) > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //DFSOLP00 DD DSN=IMS1.V120.&SYS.OLP00,DISP=SHR > > > > > > > > > > > > > > //DFSOLP01 DD DSN=IMS1.V120.&SYS.OLP01,DISP=SHR > > > > > > > > > > > > > > //DFSOLP99 DD DSN=IMS1.V120.&SYS.OLP99,DISP=SHR > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //DFSWADS0 DD DSN=IMS1.V120.&SYS.WADS0,DISP=SHR > > > > > > > > > > > > > > //DFSWADS1 DD DSN=IMS1.V120.&SYS.WADS1,DISP=SHR > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //IMSACBA DD DSN=IMS1.V120.ACBLIBA,DISP=SHR > > > > > > > > > > > > > > //* DD DSN=DBCR.V120.ACBLIB.FAID,DISP=SHR > > > > > > > > > > > > > > //IMSACBB DD DSN=IMS1.V120.ACBLIBB,DISP=SHR > > > > > > > > > > > > > > //* DD DSN=DBCR.V120.ACBLIB.FAID,DISP=SHR > > > > > > > > > > > > > > //MODBLKSA DD DSN=IMS1.V120.&SYS2.MODBLKSA,DISP=SHR > > > > > > > > > > > > > > //MODBLKSB DD DSN=IMS1.V120.&SYS2.MODBLKSB,DISP=SHR > > > > > > > > > > > > > > //MODSTAT DD DSN=IMS1.V120.&SYS.MODSTAT,DISP=SHR > > > > > > > > > > > > > > //******** SYSTEM REQUIRED DD CARDS ************** > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //SYSUDUMP DD SYSOUT=&SOUT, > > > > > > > > > > > > > > // DCB=(LRECL=125,RECFM=FBA,BLKSIZE=3129), > > > > > > > > > > > > > > // SPACE=(6050,300,,,ROUND) > > > > > > > > > > > > > > //IMSRDS DD DSN=IMS1.V120.&SYS.RDS,DISP=SHR > > > > > > > > > > > > > > //MATRIXA DD DSN=IMS1.V120.&SYS2.MATRIXA,DISP=SHR > > > > > > > > > > > > > > //MATRIXB DD DSN=IMS1.V120.&SYS2.MATRIXB,DISP=SHR > > > > > > > > > > > > > > //PRINTDD DD SYSOUT=&SOUT > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //IMSMON DD DSN=IMS1.V120.IMSMON,DISP=SHR > > > > > > > > > > > > > > > > > > > > > //****** EXTERNAL SUBSYSTEM DD CARDS *********** > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //* USER MAY OPTIONALLY ADD THE DFSESL DD CARD > > > > > > > > > > > > > > //* FOR EXTERNAL SUBSYSTEM CONNECTION. > > > > > > > > > > > > > > //* > > > > > > > > > > > > > > //DFSESL DD DSN=IMS1.V120.&SYS2.SDFSRESL,DISP=SHR > > > > > > > > > > > > > > //************ DATA BASE DD CARDS *************** > > > > > > > > > > > > > > ******************************** Bottom of Data > > > > > > > ******************************** > > > > > > > > > > > > > > > > > > > > > > > > > > > > And in DA, I see this > > > > > > > > > > > > > > > > > > > > > > > > > > > > COMMAND INPUT ===> > > > > > > > > > > > > > > PREFIX=IMS12IMS DEST=(ALL) OWNER=* SYSNAME= > > > > > > > > > > > > > > NP DDNAME StepName ProcStep DSID Owner C Dest > > > > > > > > > > > > > > JESMSGLG JES2 2 STCBRCR Z > > > > > > > > > > > > > > JESJCL JES2 3 STCBRCR Z > > > > > > > > > > > > > > JESYSMSG JES2 4 STCBRCR Z > > > > > > > > > > > > > > JESMSGLG JES2 104 STCBRCR Z > > > > > > > > > > > > > > JESYSMSG JES2 105 STCBRCR Z > > > > > > > > > > > > > > > > > > > > > > > > > > > > So, I don’t have any other SYSOUT withSYSOUT=* or SYSOUT=A > as > > > you > > > > can > > > > > > > see > > > > > > > in the above mentioned proc. > > > > > > > > > > > > > > > > > > > > > > > > > > > > So, can you please suggest, what are all change I need to > > > > > > > make for spin > > > > > > to > > > > > > > work . > > > > > > > > > > > > > > I think, I will also have to addFREE=CLOSE,SPIN=UNALLOC in > > > > > > > this IMS proc > > > > > > DD, > > > > > > > So that spin function can work. Because, currently when I > > > > > > > run spin > > > > > > command > > > > > > > like below, > > > > > > > > > > > > > > $T JQ(IMS12RC3),SPIN,DDNAME=JCLOUT > > > > > > > > > > > > > > > > > > > > > > > > > > > > I just get output as below. > > > > > > > > > > > > > > > > > > > > > > > > > > > > and output from this command is > > > > > > > > > > > > > > RESPONSE=TST4 > > > > > > > > > > > > > > $HASP890 JOB(IMS12RC3) > > > > > > > > > > > > > > $HASP890 JOB(IMS12RC3) > STATUS=(EXECUTING/TST4),CLASS=STC, > > > > > > > > > > > > > > $HASP890 PRIORITY=15,SYSAFF=(TST4),HOLD=(NONE) > > > > > > > > > > > > > > > > > > > > > > > > > > > > But this doesn’t show that spin successfully completed or not. > > > > > > > > > > > > > > > > > > > > > > > > > > > > I tried to provide you as much as detail this time. Can you > > > > > > > please > > > > > > suggest, > > > > > > > how spin will work looking at my current proc > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 08-May-2017 6:14 PM, "Barkow, Eileen" > > > > > > > <ebar...@doitt.nyc.gov> > > > > wrote: > > > > > > > > > > > > > > > As I explained to Vekat, he can use the SDSF/REXX clist I > > > > > > > > gave him to extract and archive the SYSOUT queue to a > > > > > > > > dataset as allocated in > > > > > > the > > > > > > > clist. > > > > > > > > Then the clist can issue a command like: > > > > > > > > > > > > > > > > $TSTC04306,SPIN,DDNAME=DDNTOSPIN To drain the queue. > > > > > > > > > > > > > > > > The clist has the started task number to use for the > > > > > > > > $Tstcno,SPIN > > > > > > > command. > > > > > > > > Code can also be added to extract the number of existing > > > > > > > > lines in the DDNAME to determine whether or not to spin it. > > > > > > > > Any DDNAME can be specified. > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > From: IBM Mainframe Discussion List [mailto:IBM- > > > > > > > m...@listserv.ua.edu] > > > > > > > > On Behalf Of venkat kulkarni > > > > > > > > Sent: Monday, May 08, 2017 3:34 AM > > > > > > > > To: IBM-MAIN@LISTSERV.UA.EDU > > > > > > > > Subject: Re: AW: Re: job output into dataset > > > > > > > > > > > > > > > > Just to add one more thing . Under ims12rc3 address space > > > > > > > > , below are dd name available. > > > > > > > > > > > > > > > > COMMAND INPUT ===> > > > > > > > > > > > > > > > > PREFIX=* DEST=(ALL) OWNER=* > > > > > > > > > > > > > > > > NP DDNAME StepName ProcSte > > > > > > > > > > > > > > > > JESMSGLG JES2 > > > > > > > > > > > > > > > > JESJCL JES2 > > > > > > > > > > > > > > > > JESYSMSG JES2 > > > > > > > > > > > > > > > > JESMSGLG JES2 > > > > > > > > > > > > > > > > JESYSMSG JES2 > > > > > > > > > > > > > > > > On 08-May-2017 10:25 AM, "venkat kulkarni" > > > > > > > > <venkatkulkarn...@gmail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for all suggestion and sorry for not being more > > precise. > > > > > > > > > Our requirement is > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1) Any address space (STC) running continously and > > > > > > > > > producing more number of linee, we would like to cut > > > > > > > > > lines on regulalr basis and put it in seperate dataset > > > > > > > > > and keep appending data > > > > > > > > > > > > > > > > > > on regulalr basis. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2) But I am not aware of this process of doing this task. > > > > > > > > > But after all our discussion, I did as below. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I looked at IMS12RC3 proc in proclib library and noticed > > > > > > > > > one of SYSOUT DD statement as below > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > //JCLOUT DD SYSOUT=(A,INTRDR) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Job IMS12RC3 is, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > BROWSE SYS1.DEVL.PROCLIB(IMS12RC3) - 01.03 Line > > 0000000 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ********************************* Top of Data > > > > > > > ******************** > > > > > > > > > Show quoted text > > > > > > > > > > > > > > > > > > and then I used below command to spin IMS12RC3 address > > > > > > > > > space lines and put it in dataset. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > $T JQ(IMS12RC3),SPIN,DDNAME=JCLOUT > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > and output from this command is > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > RESPONSE=TST4 > > > > > > > > > > > > > > > > > > $HASP890 JOB(IMS12RC3) > > > > > > > > > > > > > > > > > > $HASP890 JOB(IMS12RC3) > > > STATUS=(EXECUTING/TST4),CLASS=STC, > > > > > > > > > > > > > > > > > > $HASP890 PRIORITY=15,SYSAFF=(TST4), > > HOLD=(NONE) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But I think my understanding is wrong somehow but not > > > > > > > > > able to point out the issue. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I think, the flow of this process will be use SPIN > > > > > > > > > command to cut lines from running address space to spool > > > > > > > > > and then from spool, we should copy > > > > > > > > to > > > > > > > > > dataset. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > As I am new in this process, please help me with the > > > > > > > > > required steps to > > > > > > > > be > > > > > > > > > performed to achieve this. > > > > > > > > > > > > > > > > > > On 08-May-2017 8:51 AM, "Peter Hunkeler" <p...@gmx.ch> > > > wrote: > > > > > > > > > > > > > > > > > >> > > > > > > > > >> > Started tasks? TSO sessions? UNIX forked (BPXAS) > > > > > > > > >> > address > > > > spaces? > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> What do you want to say by this?? > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> -- > > > > > > > > >> Peter Hunkeler > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> ------------------------------------------------------- > > > > > > > > >> ---- > > > > > > > > >> ---- > > > > > > > > >> ---- > > > > > > > > >> --- For IBM-MAIN subscribe / signoff / archive access > > > > > > > > >> instructions, send email to lists...@listserv.ua.edu > > > > > > > > >> with the > > > > > > > > >> message: INFO IBM-MAIN > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > ---- > > > > > > > > ---- > > > > > > > > ---- For IBM-MAIN subscribe / signoff / archive access > > > > > > > > instructions, send email to lists...@listserv.ua.edu with > > > > > > > > the > > > > > > > > message: INFO IBM-MAIN > > > > > > > > > > > > > > > > ________________________________ > > > > > > > > > > > > > > > > This e-mail, including any attachments, may be > > > > > > > > confidential, privileged or otherwise legally protected. > > > > > > > > It is intended only for the addressee. If you received > > > > > > > > this e-mail in error or from someone who was not > > > > > > > > authorized to send it to you, do not disseminate, copy or > > > > > > > > otherwise use this e-mail or its > > attachments. > > > > > > > > Please notify the sender immediately by reply e-mail and > > > > > > > > delete > > > > the e- > > > > > mail from your system. > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > ---- > > > > > > > > ---- > > > > > > > > ---- For IBM-MAIN subscribe / signoff / archive access > > > > > > > > instructions, send email to lists...@listserv.ua.edu with > > > > > > > > the > > > > > > > > message: INFO IBM-MAIN > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------ > > > > > > > ---- > > > > > > > ---- > > > > > > > -- For IBM-MAIN subscribe / signoff / archive access > > > > > > > instructions, send > > > > > > email to > > > > > > > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > > > > > > > -------------------------------------------------------------- > > > > > > ---- > > > > > > ---- For IBM-MAIN subscribe / signoff / archive access > > > > > > instructions, send email to lists...@listserv.ua.edu with the > > > > > > message: INFO IBM-MAIN > > > > > > > > > > > > > > > > ---------------------------------------------------------------- > > > > > ---- > > > > > -- For IBM-MAIN subscribe / signoff / archive access > > > > > instructions, send > > > > email to > > > > > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > > > ------------------------------------------------------------------ > > > > ---- For IBM-MAIN subscribe / signoff / archive access > > > > instructions, send email to lists...@listserv.ua.edu with the > > > > message: INFO IBM-MAIN > > > > > > > > > > -------------------------------------------------------------------- > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > > send > > email to > > > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
