Have you looked at our Quick Start guide for installing and tuning z/OS 2.2 OpenSSH? https://dovetail.com/docs/pt-quick-inst/index.html
your question I believe is covered in section "1.6 Using ICSF and /dev/random" Kirk Wolf Dovetailed Technologies http://dovetail.com On Wed, Oct 19, 2016 at 9:19 AM, Dazzo, Matt < [email protected]> wrote: > This is totally new world for me so bear with me. Been reading for > several hours on trying to determine what I need to satisfy the support of > 'OpenSSH requires that a working /dev/random device' as I got the error > 'FOTS1949 PRNG is not seeded' when testing SSH-FTP on my newly installed > zos2.2 system. > > I determined that ICSF has to be implemented (started) but does CPACF > have to be enabled ? From reading the archives I found in a thread that > displaying the CPU would show if the CPACF is enabled? > > Below is a display of our CPU, appears the CPACF is not enabled? Does this > require an IPL? > > D M=CPU > IEE174I 09.46.57 DISPLAY M 216 > PROCESSOR STATUS > ID CPU SERIAL > 00 + 024E7E2828 > 01 + 024E7E2828 > 02 +I 024E7E2828 > 03 NI > 04 NI > 05 NI > > > Thanks Matt > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
