If you did not set the TIOT in ALLOCxx to the max (64K) then you will probably run out of TIOT sooner than someone who does.
If you have SDSF, check the Health Checker function - Look for TIOT in the list. See what it says. You can enter SB next to the HC functions for more details. It might help. I would just expect the system to calculate things for TIOT correctly. If you feel this is in error, you should open an SR with IBM and have them assist you. They will probably need dumps or traces to determine why it fails. Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Jake Anderson > Sent: Monday, June 20, 2016 10:43 PM > To: [email protected] > Subject: Re: TIOT exceeded > > Hi Lizette > > Apology to ask > > I am not still able to understand the calculation of TIOT usage in my case. > > It was just 1027 GDG members spanning across multiple volume. > > So how did it exhaust the TIOT ? Is there a formula that would help me to > determine? > > Jake > On Jun 21, 2016 3:23 AM, "Lizette Koehler" <[email protected]> wrote: > > > Why not run with TIOT set to 64K? I know a lot of shops that have set > > that to the maximum of 64K > > > > Lizette > > > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
