From Hardware Management Console Operations Guide, Version 1.8.2, Chapter 3-20:
>This task is supported on all z890 and z990 processors and also on z800, z900, 9672 Generation 5, and 9672 Generation 6 if running at the current Licensed Internal Code levels. I guess Connor is not running at the current LIC levels, I distinctly remember him not having this feature (nor the integrated 3270 console) available when we were initially setting the machine up. I guess updating the LIC is on the tasklist then. I see for z/VM and the SAPL, one needs certain load parameters for them to use the integrated (3270) console. So it is at the discretion of the OS (or the discretion of the systems programmer by means of configuration of the OS) to use the integrated console? How does the OS find the integrated console? Does it map itself to a certain reserved unit that the OS will look for, or does it completely bypass the concept of units? _Jan -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Norbert Friemel Sent: woensdag 11 november 2015 1:10 To: [email protected] Subject: Re: I just bought an IBM z890 On Tue, 10 Nov 2015 15:17:14 -0700, Mark Post wrote: >>>> On 11/9/2015 at 01:36 AM, Connor Krukosky <[email protected]> >>>> wrote: >> Once you use the OS Messages to configure the network port on one of the >> OSA cards you can SSH into it, I assume this is what you mean by the >> ASCII console. > >No. Newer HMCs have a feature called the "Integrated ASCII console." I'm not >sure when that came into being, but I doubt your z890 has it. > > z890 System Overview, Chapter 9-2: http://www-01.ibm.com/support/docview.wss?uid=isg29572de854cf3558185256e4d005b9e15&aid=1 Hardware Management Console Operations Guide, Version 1.8.2, Chapter 3-20: http://www-01.ibm.com/support/docview.wss?uid=isg2d37db3ef98da032e85256e550073182c&aid=1 Norbert Friemel ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
