I need to add. That TSO HRECALL can MASK and HSEND RECALL cannot - I do understand.
However, the manuals should have a better reference/documentation. I will work with IBM on how this can be handled better in the docs. Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] > On Behalf Of Lizette Koehler > Sent: Friday, May 29, 2015 9:38 AM > To: [email protected] > Subject: Re: HSM Recalls and MASKING > > Probably because I do not want to have to look in multiple manuals for > information. > > RECALL and HRECALL should, from my perspective, reference each other. > That one has a capability the other does not, is somewhat disheartening. > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:IBM- > [email protected]] > > On Behalf Of Tom Marchant > > Sent: Friday, May 29, 2015 9:21 AM > > To: [email protected] > > Subject: Re: HSM Recalls and MASKING > > > > On Fri, 29 May 2015 10:46:01 -0500, Andy Gilman wrote: > > > > >Thanks Greg. It's odd that IBM left this out of the Storage Admin > > >manual. I tried some recalls using a pattern mask as shown in the TSO > > >Help output, and it worked (with a single * representing a single > > >qualifier in the data set name). > > > > Why would you expect it to be in the Storage Admin manual? > > In section 2.1, "DFSMShsm commands" the Storage Admin manual says: > > > > <quote> > > The user commands are listed here for your information, but z/OS > > DFSMShsm Managing Your Own Data describes them in detail. > > </quote> > > > > HRECALL is a user command. Look in the Managing Your Own Data manual > > to find out how to specify the filter. > > > > -- > > Tom Marchant > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
