I had been looking in the Programming Guide for samples of how to call CA-1 and obtain information about a volser. There is a specific macro with which to do this, but, in my opinion, the narrative for the macro and the other macros needed to provide the needed interface leave something to be desired.
I was hoping someone might have an example of a program that would take a given volser and ask CA-1 for what it knows about it. As to reports, that won't work. What I'm doing isn't "report" driven and is dynamic. As to utilities, unless there's a callable utility module to which you pass a volser and it returns the CA-1 data related to it, utilities won't work, either. I will check out the CBT to see if there is anything usable there. Thanks to all that replied. C- Charles (Chuck) Hardee Senior Systems Engineer/Database Administration EAS Information Technology Thermo Fisher Scientific 300 Industry Drive | Pittsburgh, PA 15275 Phone +1 (724) 517-2633 | Mobile +1 (412) 877-2809 | FAX: +1 (412) 490-9230 [email protected] | www.thermofisher.com WORLDWIDE CONFIDENTIALITY NOTE: Dissemination, distribution or copying of this e-mail or the information herein by anyone other than the intended recipient, or an employee or agent of a system responsible for delivering the message to the intended recipient, is prohibited. If you are not the intended recipient, please inform the sender and delete all copies. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Lizette Koehler Sent: Thursday, May 21, 2015 11:52 AM To: [email protected] Subject: Re: CA-1 programming example And the CA1 Utilities Manual will have examples for TMSGRW and EARL. Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] > On Behalf Of Lizette Koehler > Sent: Thursday, May 21, 2015 8:50 AM > To: [email protected] > Subject: Re: CA-1 programming example > > There are a couple options. > 1) TMSGRW > 2) CA EARL > 3) Vantage/SRM/GMI > > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:IBM- > [email protected]] > > On Behalf Of Hardee, Chuck > > Sent: Thursday, May 21, 2015 8:39 AM > > To: [email protected] > > Subject: CA-1 programming example > > > > Has anyone out there written a program to inquire against a CA-1 tape > > library? > > I'm looking for tips and/or samples of how to do it. > > I have a list of DSNs and their (tape) VOLSERs but I'd like to get > > more information about the DSN/VOLSER from CA-1. > > > > Anything shareable that someone might have would be greatly > appreciated. > > > > Thanks, > > Chuck > > > > Charles (Chuck) Hardee > > Senior Systems Engineer/Database Administration EAS Information > > Technology > > > > Thermo Fisher Scientific > > 300 Industry Drive | Pittsburgh, PA 15275 Phone +1 (724) 517-2633 | > > Mobile > > +1 (412) 877-2809 | FAX: +1 (412) 490-9230 > > [email protected] | www.thermofisher.com ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
