What data class do you have assigned to this zFS? Does it have DYNA VOL Count or Vol Count?
You should not need to add unless there are errors indicating an out of space condition. SYSLOG should have an IEC161 message about it. Is this file set up for EA/EF (Extended Addressable/Extended Format)? If not, it will only get to 4G before it will fail. When you do a LISTC ENT(name) against this zFS does the information on the VOLUME section show one volume or volumes with * in the field? With aggrow setup - this is just informational and not an issue. zFS will expand the file until it hits 4GB unless it is defined with EA/EF. Lizette -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of venkat kulkarni Sent: Friday, January 16, 2015 12:54 AM To: [email protected] Subject: ZFS Space issue Hello, User want me to increase size for this , as it filled by 81%. But when I checked, this dataset is multi volume and both volume are almost full. So, now what alternative do I have to increase the size of this ZFS file system . This is SMS managed dataset and in this storage group, I have one volume which is 85% full and rest all are 99%. # df -Pk /support/DGPBY Filesystem 1024-blocks Used Available Capacity Mounted on ZFS.SYS01.AGG 14420160 11597365 2822795 81% /support/DGPBY # Any suggestion. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
