Hello Lizette,
Thanks for reply .I don't see any such message in
SYSLOG. As I mentioned before. I created /tmp with size of
. . . . . . . . . . . . . . . . . . . . . . . . .
.
Data Set Information
Command ===>
Data Set Name . . . : OMVS.SYS5.RSU.TEMP
1st extent megabytes: 7000
Secondary megabytes : 0
Data set name type : HFS Dates
Creation date . . . : 2014/12/04
Referenced date . . : 2014/12/04
Expiration date . . : ***None***
Current Allocation
Allocated megabytes : 7,000
Allocated extents . : 1
Maximum dir. blocks : NOLIMIT
Current Utilization
Used pages . . . . : 1,241,552
% Utilized . . . . : 69
Number of members . : 4
Do I need to create still bigger space for this temp.
On Tue, Dec 9, 2014 at 1:52 PM, Lizette Koehler <[email protected]>
wrote:
> Did you find any IOE or BPX or IEC or other messages in SYSLOG when this
> error occurred?
>
> What I found happened was the /tmp was full and causing the issue rather
> than the file on the PAX command.
>
> You may need to search through your output to see if there are Unix errors
> other than in SYSPRINT DD for your /tmp file.
>
> Lizette
>
>
> > -----Original Message-----
> > From: IBM Mainframe Discussion List [mailto:[email protected]] On
> > Behalf Of Mainframe Mainframe
> > Sent: Tuesday, December 09, 2014 1:13 AM
> > To: [email protected]
> > Subject: Re: RSU UNZIP space issue.
> >
> > Hello All,
> > Sorry for delay in response. This problem has been
> resolved by removing
> > all SMS related parameter and by just keeping HFS as DSN type.
> > Now I am able to allocate this bigger space of FS for unzipping purpose.
> > But my unzip still getting failed, with below error. I tried enough ways
> by having
> > larger size but same issue.
> >
> >
> > Unzip JCL,
> >
> > //UNZIPRSU JOB 'MAINFRAME',CLASS=A,MSGCLASS=A,NOTIFY=&SYSUID
> > //UNZIP EXEC PGM=GIMUNZIP,PARM='HASH=NO'
> > //SYSUT3 DD UNIT=3390,SPACE=(CYL,(400,100))
> > //SYSUT4 DD UNIT=3390,SPACE=(CYL,(400,100))
> > //SMPOUT DD SYSOUT=*
> > //SYSPRINT DD SYSOUT=*
> > //SMPDIR DD PATH='/u/SLE/RSU1410/',
> > // PATHDISP=KEEP
> > //SMPWKDIR DD PATH='/u/SLE/RSU1410/temp',
> > // PATHDISP=KEEP
> > //SYSIN DD DATA,DLM=$$
> > <GIMUNZIP>
> > <ARCHDEF
> > name="SMPPTFIN/S0001.SHOPZ.S2654213.SMPMCS.pax.Z"
> > volume="TEMP01"
> > newname="SMPE.ZOS21.RSU.S2654213.SMPMCS"
> > replace="yes">
> > </ARCHDEF>
> > <ARCHDEF
> > name="SMPHOLD/S0002.SHOPZ.S2654213.SMPHOLD.pax.Z"
> > volume="TEMP01"
> > newname="SMPE.ZOS21.RSU.S2654213.SMPHOLD"
> > replace="yes">
> > </ARCHDEF>
> > </GIMUNZIP>
> > $$
> >
> > Size of RSU and other related datasets are
> >
> > . . . . . . . . . . . . . . . . . . . . . . . .
> .
> > . .
> > Data Set Information Command ===>
> > More:
> > +
> > Data Set Name . . . . : SMPE.ZOS21.RSU.S2654213.SMPMCS
> >
> > General Data Current Allocation
> > Management class . . : **None** Allocated cylinders : 4,300
> > Storage class . . . : **None** Allocated extents . : 1
> > Volume serial . . . : TEMP01
> > Device type . . . . : 3390
> > Data class . . . . . : **None**
> > Organization . . . : PS Current Utilization
> > Record format . . . : FB Used cylinders . . : 0
> > Record length . . . : 80 Used extents . . . : 0
> > Block size . . . . : 27920
> > 1st extent cylinders: 4300
> > Secondary cylinders : 0 Dates
> > Data set name type : Creation date . . . : 2014/12/04
> > SMS Compressible. . : NO Referenced date . . : ***None***
> > Expiration date . . : ***None***
> >
> >
> >
> >
> > # df -Pk /u/SLE/RSU1410/
> > Filesystem 1024-blocks Used Available Capacity Mounted
> on
> > OMVS.SYS5.RSU.SAURABH 3072048 2696780 375152 88%
> > /u/SLE/RSU1410
> >
> > # df -Pk /u/SLE/RSU1410/temp
> > Filesystem 1024-blocks Used Available Capacity Mounted
> on
> > OMVS.SYS5.RSU.TEMP 7168032 4966228 2201700 70%
> > /u/SLE/RSU1410/temp
> >
> >
> > Error, I am getting is,
> >
> >
> > ********************************* TOP OF DATA
> > **********************************
> >
> -------------------------------------------------------------------------------
> > DATE 12/04/14 TIME 06:19:15 SMP/E
> > 36.13
> > UNIX COMMAND OUTPUT
> >
> > > /bin/pax -zvrf
> > > /u/SLE/RSU1410/SMPPTFIN/S0001.SHOPZ.S2654213.SMPMCS.pax.Z
> > > ./GIMFAF.XML
> >
> > ./GIMFAF.XML
> >
> -------------------------------------------------------------------------------
> > DATE 12/04/14 TIME 06:22:33 SMP/E
> > 36.13
> > UNIX COMMAND OUTPUT
> >
> > > /bin/pax -zvrf
> > > /u/SLE/RSU1410/SMPPTFIN/S0001.SHOPZ.S2654213.SMPMCS.pax.Z
> >
> > ./GIMFAF.XML
> > ./SMPPTFIN
> > pax: FSUM6260 write error on file "./SMPPTFIN": EDC5133I No space left on
> > device
> > ******************************** BOTTOM OF DATA
> > ********************************
> >
> >
> > ----------<GIMUNZIP>
> > ----------<ARCHDEF
> > ----------name="SMPPTFIN/S0001.SHOPZ.S2654213.SMPMCS.pax.Z"
> > ----------volume="TEMP01"
> > ----------newname="SMPE.ZOS21.RSU.S2654213.SMPMCS"
> > ----------replace="yes">
> > ----------</ARCHDEF>
> > ----------<ARCHDEF
> > ----------name="SMPHOLD/S0002.SHOPZ.S2654213.SMPHOLD.pax.Z"
> > ----------volume="TEMP01"
> > ----------newname="SMPE.ZOS21.RSU.S2654213.SMPHOLD"
> > ----------replace="yes">
> > ----------</ARCHDEF>
> > ----------</GIMUNZIP>
> > GIM68200E ** PROCESSING FAILED FOR THE /bin/pax UNIX SYSTEM
> > SERVICE COMMAND.
> > GIM47800S ** AN ERROR OCCURRED WHILE GIMUNZIP WAS PROCESSING
> > ARCHIVE
> > /u/SLE/RSU1410/SMPPTFIN/S0001.SHOPZ.S2654213.SMPMCS.pax.Z.
> > GIM20501I GIMUNZIP PROCESSING IS COMPLETE. THE HIGHEST
> > RETURN CODE WAS
> > 12.
> >
> >
> >
> > IGD104I HFS FILE WAS RETAINED, DDNAME IS (SMP00001) FILENAME IS
> > (/u/SLE/RSU1410/temp/smpe2014338061915982269/GIMFAF.XML)
> > IEF142I UNZIPRSU UNZIP - STEP WAS EXECUTED - COND CODE 0012
> > IEF285I SYS14338.T061915.RA000.UNZIPRSU.R0109899 DELETED
> > IEF285I VOL SER NOS= STO500.
> >
> > I am not getting any clue to solve this issue. how much more space I
> will have to
> > allocate or some other way to resolve this.
> >
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
