Jake, Check your IEASYSxx member. Ensure the PROGxx members contain the library you are looking for. Check your SYSLOG at IPL time. See if there is an error message indicating a library was not found. If you have Mark Zelden's IPLINFO REXX, that can help you isolate what is or is not being brought in at IPL Time through IEASYS.
Next, use ISRDDN as suggested on the system where the load is failing. Use the LINKLIST command. Not now, as you "fixed" the issue. At the next IPL if DB2 fails to start, then use ISRDDN to see what is on the failing system. Last, verify your IPL process. If you had posted the error message(s) you received when starting DB2, it might lead to better answers. You may have more issues than this. Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Scott Ford > Sent: Monday, October 06, 2014 8:41 AM > To: [email protected] > Subject: Re: Linklist load during IPL message > > Jake: > > > I would think you could search thru the Linklist and find if the module was > missing … > > I think ISRDDN can do it > > Regards, > > Scott > From: Jake anderson > Sent: Monday, October 6, 2014 11:20 AM > To: [email protected] > > Hi Group, > > We had a situation where a DB2 program DSN3INI was not found due to which the > DB2 start up command showed invalid command. > > I checked up the SYSLOG and I do not see any evidence where LINKLIST libraries > are loaded. Then Removed the DB2 subsystem dynamically from the IEFSSNxx > and readded to the IEFSSNxx. > > It worked after the above band aid. Is there a way to verify if the LINKLIST > library > gets loaded during IPL time. > > Strange thing to see that DB2 SDSNLINK shows under D PROG,LNKLST and it > was weird thing was that DSN3INI showed as not found during IPL time. > > Could someone throw light on the above. > > > Jake > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
