Hi all,
Yes, the cables physically changed connect from DASD box to Tape controller.
I think J.O is right, maybe I should config one IODF to remove the links
first,then config new stuff... as now I did all in one step..
Below are CF CHP message:
CF CHP(A1),ONLINE
IOS156I THE FOLLOWING DEVICES ARE NOW AVAILABLE FOR USE: 524
CB10-CB5F
D M=CHP(A1)
IEE174I 00.45.43 DISPLAY M 526
DISPLAY M RESOURCE 'PATH' IS CURRENTLY IN USE
CHPID A1: TYPE=1D, DESC=FICON INCOMPLETE, ONLINE
DEVICE STATUS FOR CHANNEL PATH A1
0 1 2 3 4 5 6 7 8 9 A B C D E F
CB1 +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
CB2 +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
CB3 +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
CB4 +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
CB5 +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
SWITCH DEVICE NUMBER = NONE
ATTACHED ND = NOT KNOWN
PHYSICAL CHANNEL ID = 0101
************************ SYMBOL EXPLANATIONS ************************
+ ONLINE @ PATH NOT VALIDATED - OFFLINE . DOES NOT EXIST
* PHYSICALLY ONLINE \ PATH NOT OPERATIONAL
V CB10,ONLINE
IEE103I UNIT CB10 NOT BROUGHT ONLINE 528
IEE763I NAME= IECVIOPM CODE= 0000000400000000
IOS551I NO PATHS PHYSICALLY AVAILABLE
IEE764I END OF IEE103I RELATED MESSAGES
On Fri, Oct 3, 2014 at 6:13 AM, J O Skip Robinson <[email protected]>
wrote:
> For some types of what I'll all 'radical' changes, we've found it
> necessary to implement in two steps. The first step deletes the old stuff.
> The second step adds the new stuff back where the old stuff used to be.
> Each step requires full h/w and s/w activation.
>
> If instead you try to transform one kind of gizmo into another in a single
> step, you can get weird results.
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] On
> Behalf Of John D Levine
> Sent: Thursday, October 02, 2014 12:44 PM
> To: [email protected]
> Subject: Re: HCD Question
>
> Hi Xu, you did not say whether the cabling has moved from the DASD box to
> the Tape controller. However, a POR is not necessary to implement this
> change. Perhaps you can post the messages from your CF command or VARY
> command.
>
>
> John L.
>
>
>
> From: "Neubert, Kevin" <[email protected]>
> To: [email protected]
> Date: 10/02/2014 01:50 PM
> Subject: Re: HCD Question
> Sent by: IBM Mainframe Discussion List <[email protected]>
>
>
>
> Need to see more information, but If you're confident with the definitions
> and the activates were indeed successful, sounds more like cabling, etc.
> What do D M=CHP() and D M=DEV() show for your respective changes? Any
> DOES NOT EXIST/NOT IN SYSTEM type messages?
>
> Regards,
>
> Kevin
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] On
> Behalf Of Cobe Xu
> Sent: Thursday, October 02, 2014 10:20 AM
> To: [email protected]
> Subject: HCD Question
>
> Hi list,
>
> Nowadays, I think most of IODF changes can be dynamic activated and take
> effective to all Lpars within CPC. i.e. No POR
>
> My case is to re-config 2 FC channels from DASD box to a new Tape box.
> Also, add new CU/device for the TAPE box.
>
> However, when I perform h/w Activate from one lpar with new IODF, and SOFT
> activate in every LPAR... I still got s/w & h/w HSA token in-sync.. And,
> the re-configured 2 FCs are not able to ONLINE porperly with the attached
> devices...
>
> I wonder if I miss some operations? or actually POR is necessary for such
> case.... ?
>
> Thanks!
> -
> Cobe Xu
>
> Best Regards
> -----------------------------------------------------------
> z/OS Performance & Capacity Analyst
> z/OS System Programmer
> Email: [email protected]
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
--
Cobe Xu
Best Regards
-----------------------------------------------------------
z/OS Performance & Capacity Analyst
z/OS System Programmer
Email: [email protected]
-----------------------------------------------------------
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
