There is an error in your usermod. Using group temporarily corrected your problem but you still have a problem. If you change this exit again, you may not get the expected results from APPLY GROUP REDO. Without specifics, we can only guess at the error. For example, if this module was auto linked with the load module instead of SMP/E replacing the module within the load module.In this case, the first APPLY would have assembled the module. The second apply with GROUP would have linked it. If this is the problem, then SMP/e won't specify REPLACE for the binder.
Skip's recommendation is good example. Just be aware that you need to ensure the JCLIN matches existing definitions. Your description of the modules and load module structure is not clear so you may have additional modules that are affected. Check with the vendor for a sample on how they recommend installing this as a usermod. Jon Perryman On Thursday, May 15, 2014 10:08 AM, "Hardee, Chuck" <[email protected]> wrote: I added GROUP to one of the APPLY REDOs for one of the exit usermods and now the user mod gets assembled and the table module gets relinked. >Exactly what I wanted. > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
