We maintain 2 SMFPRM* decks exactly for this reason - At IPL time we DO not record 19's, following the IPL we switch SMF to record 19's via automation.
Jerry Whitteridge Lead Systems Programmer Safeway Inc. 925 951 4184 If you feel in control you just aren't going fast enough. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Staller, Allan Sent: Tuesday, February 18, 2014 7:41 AM To: [email protected] Subject: Re: IEF196I Message Are you recording SMF19's? *VERY* early in the IPL process, the system attempts to touch all *ATTACHED* DASD (for the purposes of the SMF19 record). It will wait if the volume is busy to another LPAR. If you turn off SMF19 processing, I would expect this issue to go away, HTH, <snip> We are running zos1.13 in a monoplex environment. 1 production lpar and 1 sandbox. We do have a couple of shared volumes for the convenience of moving dsn's etc. The 4299 address is NOT a shared volume, it's online to the production lpar and offline to the sandbox. That's the config in IODF. Why would I get this message on the lpar where the device is configured offline and not used? Thanks </snip> Matt ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN "Email Firewall" made the following annotations. ------------------------------------------------------------------------------ Warning: All e-mail sent to this address will be received by the corporate e-mail system, and is subject to archival and review by someone other than the recipient. This e-mail may contain proprietary information and is intended only for the use of the intended recipient(s). If the reader of this message is not the intended recipient(s), you are notified that you have received this message in error and that any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this message in error, please notify the sender immediately. ============================================================================== ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
