Yes, I checked Job log and errors starting from GIM44002S message and the
reason is GIMDRS module present in SYS1.MIGLIB, which is part of LNKLST
concatenation.
GIM44002S ** SYSTEM ABEND 106 OCCURRED WITH A REASON CODE OF '0000000F'X AFT
SMP/E CALLED THE GIMDRS UTILITY TO PROCESS THE SYSUT1 LIBRARY.
GIM30217I APPLY PROCESSING FAILED FOR SYSMOD UA68267. RETRANSFORMATION
PROCESSING FAILED FOR AN ELEMENT IN UA68267.
etc....
SYS1.MIGLIB information is below. But It has used only one extant, which
is normal.
Data Set Information
Command ===>
Data Set Name . . . : SYS1.MIGLIB
General Data Current Allocation
Volume serial . . . : ZS1RS Allocated blocks . : 1,479
Device type . . . . : 3390 Allocated extents . : 1
Organization . . . : PO Maximum dir. blocks : 2000
Record format . . . : U
Record length . . . : 0
Block size . . . . : 32760 Current Utilization
1st extent blocks . : 1479 Used blocks . . . . : 943
Secondary blocks . : 947 Used extents . . . : 1
Used dir. blocks . : 327
Number of members . : 1,967
Dates
Creation date . . . : 2012/11/05
Referenced date . . : 2014/01/12
Expiration date . . : ***None***
Yes, I am applying Maintenance to Live RES volume. But I have one more RES
volume, So I can try switching to that RES volume and let DDDEF point to
the current RES volume
and then try running this apply Job .
>From one of the link on internet, I found below link.
https://communities.ca.com/web/mainframe-2.0-community/message-board/-/message_boards/message/103509396;jsessionid=1BC4E0A3029C7C6E6F656B0C676C4189?p_p_auth=XO9hkQmC&#p_19
This link suggest to follow below steps to resolve this issue.
Issue the following command to determine thename of the link list:
D PROG,LNKLST,NAMES
Should be LNKLST00in most cases.
Then issue:
a) SETPROG LNKLST,UNALLOCATE
b) P LLA
c) SETPROG LNKLST,DEFINE,NAME=LNKLST01,COPYFROM=CURRENT
d) SETPROG LNKLST,ACTIVATE,NAME=LNKLST01
e) SETPROG LNKLST,UPDATE,JOB=*
f) S LLA,SUB=MSTR
g) SETPROG LNKLST,ALLOCATE
So we no longer use LNKLST00 and use a new one called LNKLST01.
Please suggest.
On Sun, Jan 12, 2014 at 5:19 PM, Lizette Koehler <[email protected]>wrote:
> Also. The *LINKLST* does not always mean SYS1.LINKLIB.
>
> It means that in the Linklst concatenation you may have a datasets in
> secondary extents. You need to see what library was being worked on at the
> time of the failure.
>
> In the output of your SMP/E job it will tell you what PTF it was working on
> at the time of the error. You can then look up that PTF and see what
> library it was going to update.
>
> Are you new to z/OS System Programming and SMP/E work? If so, it will help
> us to know that.
>
> The information you provide indicates this is may be a new function for
> you.
>
> Lizette
>
>
> > -----Original Message-----
> > From: IBM Mainframe Discussion List [mailto:[email protected]] On
> > Behalf Of Lizette Koehler
> > Sent: Sunday, January 12, 2014 4:41 AM
> > To: [email protected]
> > Subject: Re: z/OS 1.13 PTF apply Issue
> >
> > Some searches on the internet for IBM S106 0F
> > brings up
> >
> > These messages and the ABENDS106-0F indicate that a link list ( LNKLST )
> library
> > has gone into additional extents. This could occur if SMP/E maintenance
> was being
> > applied to the library
> >
> > So, if your LINKLST library is in EXTENTS (and LINKLST datasets should
> not
> be
> > coded with Secondary Extents) then you will need to IPL. You can use the
> TSO
> > function ISRDDN to see if the LINKLST is in extents.
> >
> > In ISPF on any command line issue
> > TSO ISRDDN
> >
> > Then on the command line issue
> > LINKLIST
> >
> > It should highlight datasets in extents in your LINKLST concatenation.
> >
> > Another question.
> >
> > Is your SMP/E TLIBs your LIVE RUNNING datasets? If so, you probably need
> to
> > change that.
> >
> > Applying maintenance to a live system can create problems.
> >
> > If you are running maintenance to a secondary SYSRES volume set. Then
> make
> > sure your job is pointing to the correct volsers.
> >
> > Lizette
> >
> >
> > > -----Original Message-----
> > > From: IBM Mainframe Discussion List [mailto:[email protected]]
> > > On Behalf Of venkat kulkarni
> > > Sent: Saturday, January 11, 2014 11:17 PM
> > > To: [email protected]
> > > Subject: z/OS 1.13 PTF apply Issue
> > >
> > > Hello,
> > > While applying some PTF's on z/OS 1.13 system, I
> > > encountered
> > below error.
> > >
> > > IEW4009I FETCH FAILED FOR MODULE GIMDRS FROM DDNAME -
> > > LNKLST- BECAUSE OF
> > > AN I/O ERROR.
> > > IEW4005I FETCH FOR MODULE GIMDRS FROM DDNAME -LNKLST-
> > > FAILED BECAUSE
> > > IEWFETCH ISSUED RC 0F AND REASON 40
> > > CSV031I LIBRARY ACCESS FAILED FOR MODULE GIMDRS , RETURN
> > CODE 24,
> > > REASON CODE 26080021, DDNAME *LNKLST*
> > > CSV028I ABEND106-0F JOBNAME=APPCHK STEPNAME=S1
> > > IEA995I SYMPTOM DUMP OUTPUT 157
> > > 157 SYSTEM COMPLETION CODE=106 REASON
> > CODE=0000000F
> > >
> > >
> > > Then I tried following below link to solve issue .
> > >
> > > http://www-01.ibm.com/support/docview.wss?uid=isg1OA07146
> > >
> > >
> > > 0F
> > >
> > >
> > >
> > >
> > >
> > > Permanent I/O error.
> > >
> > > Reason Code Error Description
> > > 40 I/O error on a real dataset
> > > This indicate I/O error, but I dont see any issue with DATASET. I am
> > > able
> > to browse
> > > without any issue.
> > >
> > > now, I am not even able to issue any command on z/OS system and
> > > getting
> > issues
> > > like below.
> > >
> > >
> > > D PROG,LNKLST,NAME=CURRENT
> > > IEW4009I FETCH FAILED FOR MODULE IEECB972 FROM DDNAME -
> > LNKLST- BECAUSE
> > > OF AN I/O ERROR.
> > > IEF196I IEW4009I FETCH FAILED FOR MODULE IEECB972 FROM DDNAME
> > -
> > > LNKLST- IEF196I BECAUSE OF AN I/O ERROR.
> > > IEW4005I FETCH FOR MODULE IEECB972 FROM DDNAME -LNKLST-
> > FAILED BECAUSE
> > > IEWFETCH ISSUED RC 0F AND REASON 40 IEF196I IEW4005I FETCH FOR
> > MODULE
> > > IEECB972 FROM DDNAME -LNKLST- FAILED IEF196I BECAUSE IEWFETCH
> > ISSUED
> > > RC 0F AND REASON 40 CSV031I LIBRARY ACCESS FAILED FOR MODULE
> > IEECB972,
> > > RETURN CODE 24, REASON CODE 26080021, DDNAME *LNKLST* IEF196I
> > CSV031I
> > > LIBRARY ACCESS FAILED FOR MODULE IEECB972, RETURN CODE
> > IEF196I 24,
> > > REASON CODE 26080021, DDNAME *LNKLST* CSV028I ABEND106-0F
> > > JOBNAME=MSTJCL00 STEPNAME=RESOLVER IEF196I CSV028I
> > ABEND106- 0F
> > > JOBNAME=MSTJCL00 STEPNAME=RESOLVER IEA045I AN SVC DUMP
> > HAS STARTED AT
> > > TIME=21.53.59 DATE=01/11/2014 222 FOR ASID (0001) ERROR ID =
> > SEQ02443
> > > CPU00 ASID0001 TIME21.53.58.9 QUIESCE = YES IEE480I DISPLAY PROG
> > > COMMAND ABEND 106-0000000F, DUMPED, TERMINATED IEA794I SVC
> > DUMP HAS
> > > CAPTURED: 223
> > >
> > >
> > > Please suggest.
> > >
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions, send
> email
> to
> > [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
