Rob,
Thanks. I see my confusion. The error also is for AMODE 24 when AMODE 31 is
needed in additon to AMODE 31 when AMODE 24 is needed.
Cliff McNeill
> Date: Wed, 8 Jan 2014 19:35:09 +0000
> From: [email protected]
> Subject: Re: Error Adding CSVLLIX1 using CSVDYNEX with modaddr paramter
> To: [email protected]
>
> Cliff
>
> The original MODADDR keyword pointed to the load point of the module and not
> the required address of the load point (ie one level of dereferencing out).
>
> As the first four bytes of the module were probably some sort of branch
> around the eye catch instruction and was not greater than x'7Fxxxxxx' - for
> example x'47F0xxxx', CSVDYNEX thought that the caller had passed a 24bit
> address instead of the required 31bit.
>
>
>
>
> > On 8 Jan 2014, at 18:38, "Clifford McNeill" <[email protected]> wrote:
> >
> > I'd be interested if this fixes the problem. I looked up the CSVDYNEX RC 8
> > and RSN 827 and it says a AMODE=31 exit routine is being added to an exit
> > that requires its routines to be AMODE=24.
> >
> > Cliff McNeill
> >
> >
> >
> >> Date: Wed, 8 Jan 2014 17:08:08 +0000
> >> From: [email protected]
> >> Subject: Re: Error Adding CSVLLIX1 using CSVDYNEX with modaddr paramter
> >> To: [email protected]
> >>
> >> From the CSVDYNEX doc :
> >>
> >> "MODADDR specifies a fullword (or a register containing the address of a
> >> fullword) that contains the address of the exit routine to be added."
> >>
> >> I suggest you code "MODADDR=LLA_EXIT" in your CSVDYNEX macro specification.
> >>
> >> Rob Scott
> >> Lead Developer
> >> Rocket Software
> >> 77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA
> >> Tel: +1.781.684.2305
> >> Email: [email protected]
> >> Web: www.rocketsoftware.com
> >>
> >>
> >> -----Original Message-----
> >> From: IBM Mainframe Discussion List [mailto:[email protected]] On
> >> Behalf Of MichealButz
> >> Sent: 08 January 2014 16:46
> >> To: [email protected]
> >> Subject: Error Adding CSVLLIX1 using CSVDYNEX with modaddr paramter
> >>
> >> Hi,
> >>
> >>
> >>
> >> I am getting the following return code when try to add CSVLLIX1 with the
> >> moaddr parameter of CSVDYNEX
> >>
> >> The AMODE of the program is correct = 31 As The high order bit of the
> >> address is one
> >>
> >> With the dsname parameter I get a RC of 0 R15 = 8 , R0
> >> = 827
> >>
> >> Below is my code
> >>
> >>
> >>
> >> * Add LLA exit CSVLLIX1 in case module is LLA MA
> >>
> >> *
> >>
> >> LOAD EP=CSVLLIX1
> >>
> >> ST R0,LLA_EXIT
> >>
> >> L R9,PSAAOLD-PSA(,R0)
> >>
> >> ZZ USING ASCB,R9
> >>
> >> ICM R8,B'1111',ZZ.ASCBJBNI
> >>
> >> BZ STARTTSK
> >>
> >> MVC JOB_NAME,0(R8)
> >>
> >> B PRIME_JOB
> >>
> >> STARTTSK DS 0H
> >>
> >> ICM R8,B'1111',ZZ.ASCBJBNS
> >>
> >> MVC JOB_NAME,0(R8)
> >>
> >> PRIME_JOB DS 0H
> >>
> >> LA R8,JOB_NAME
> >>
> >> *
> >>
> >> L R10,LLA_EXIT
> >>
> >> CSVDYNEX REQUEST=ADD,
> >>
> >> EXITNAME=CSVLLIX1,
> >>
> >> STATE=ACTIVE,
> >>
> >> MODNAME=CSVLLIX1,
> >>
> >> MODADDR=(R10),
> >>
> >> JOBNAME=(R8),
> >>
> >> POS=FIRST,
> >>
> >> RETCODE=RETCODE,
> >>
> >> RSNCODE=RSNCODE,MF=(E,DYN_PARM)
> >>
> >>
> >>
> >> Program defination
> >>
> >>
> >>
> >> Name Prompt Alias-of Size TTR AC AM
> >> RM
> >>
> >> . CSVLLIX1 00000060 00480B 01 31
> >> ANY
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> R15 = 08
> >>
> >>
> >>
> >> R0 = xxxx0827
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> CSVDYNEXRSNBADAMODE
> >>
> >>
> >>
> >> Meaning: Program error. For an ADD,
> >>
> >> MODIFY, or REPLACE request: one of the
> >>
> >> following occurred:
> >>
> >>
> >>
> >> ° An exit routine with AMODE=31 is
> >>
> >> being added to an exit that requires
> >>
> >> that its exit routines have AMODE=24.
> >>
> >>
> >>
> >> ° An exit routine with AMODE=24 is
> >>
> >> being added to an exit that requires
> >>
> >> that its exit routines have AMODE=31.
> >>
> >>
> >>
> >> Action: Make sure the AMODE attributes of
> >>
> >> the exit routine to be added conform to
> >>
> >> the exit definition.
> >>
> >>
> >>
> >>
> >>
> >> 2.5.3 Exit Routine Environment
> >>
> >>
> >>
> >>
> >>
> >> CSVLLIX1 receives control in the following environment:
> >>
> >>
> >>
> >>
> >>
> >> . Enabled for interrupts.
> >>
> >>
> >>
> >>
> >>
> >> . In supervisor state and in primary ASC mode with the primary ASID equal
> >> to the home ASID.
> >>
> >>
> >>
> >>
> >>
> >> . In AMODE 31 and RMODE ANY.
> >>
> >>
> >>
> >>
> >>
> >> . Under a content supervisor's SVRB within the user's address space.
> >>
> >>
> >>
> >>
> >>
> >> . With no locks or ENQs held.
> >>
> >>
> >>
> >>
> >>
> >> . Under any task that might issue a LINK, LOAD, XCTL, or ATTACH macro.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> Subtopics:
> >>
> >>
> >>
> >>
> >>
> >>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
