Hello,
Thanks for response . Look like the problem has been resolved now
by using OSA/SF. We are still doing testing to confirm this changes.
Thanks to all for helping.
On Mon, Nov 18, 2013 at 6:14 AM, Peter Bishop <[email protected]> wrote:
> Hi Venkat,
>
> You need to use OSA/SF if you're using SNA mode on the OSE CHPID. Extract
> from OSA Express manual SA22-7935-14 below, where the "any other" refers to
> anything other than TCPIP Passthru using the default OAT:
>
> ---start extract
> Any other non-QDIO OSA-Express feature requires OSA/SF to configure the
> OSA.
> ---end extract
> Also, see the text for message IST1023E.
>
> cheers
> Peter
>
> On Sun, 17 Nov 2013 19:33:27 +0530, venkat kulkarni <
> [email protected]> wrote:
>
> >Hello,
> > We are trying to make SNA connectivity between CICS region on
> >z/OS 1.13 system using Bean connect and IBM communication controller
> >sitting on AIX system .
> >For doing this connectivity, we did below setup but somehow this
> >connectivity not working.
> >
> >1) I created OSE type of chipid and connected 30 devices with type OSA
> >using control unit. I have used OSE CHPID MAC address in AIX box for this
> >connection.
> >
> >2) I created XCA major node definition and used CUADDR= first device
> >number from above created 30 devices.
> >
> >OSA120MJ VBUILD TYPE=XCA EXT COMM ADAPTER MAJOR NODE
> >OSA120PT PORT MEDIUM=CSMACD, CSMA/CD 802.3 LAN +
> > ADAPNO=0, FIRST OSA ETHERNET PORT +
> > CUADDR=1200, CHANNEL UNIT ADDRESS +
> > TIMER=60, WAIT 60 SECS AFTER CHANNEL ACTIVATED +
> > SAPADDR=4 SERVICE ACCESS POINT ADDRESS
> >OSA120G1 GROUP DIAL=YES, LINES IN GROUP NEED SWITCHED PROT +
> > ANSWER=ON, PUS CAN DIAL TO VTAM WHEN LINE ACT +
> > AUTOGEN=(12,L,P), AUTO CREATE 12 LINES +
> > CALL=INOUT, INCOMING AND OUTGOING CALLS +
> > ISTATUS=ACTIVE LINE ACTIVE WHEN MAJ NODE ACTIVE
> >
> >3) I also created switched major node and in this I have used IDBLK and
> >IDNUM from the node_id = <05d12138> parameter in AIX system IBM
> >communication controller config file
> >
> >*
> >SNABD VBUILD TYPE=SWNET
> >ABD1 PU ADDR=04, *
> > IDBLK=05D, *
> > IDNUM=12138, *
> > CPCP=YES, *
> > DISCNT=NO, *
> > ISTATUS=ACTIVE, *
> > MAXPATH=4, *
> > MAXOUT=7, *
> > SSCPFM=USSSCS, *
> > USSTAB=USSTAB, *
> > USSTAB=USSTAB, *
> > MAXDATA=1033, *
> > PACING=0, *
> > VPACING=0, *
> > MODETAB=MODECIVM, *
> > PUTYPE=2
> >PATH01 PATH DIALNO=00040015C5E836A6
> >ABD101 LU LOCADDR=00, *
> > DLOGMOD=CICVLU62, *
> > MODETAB=MODECICV
> >ABD102 LU LOCADDR=00 INDEPENDENT NODE
> >ABD103 LU LOCADDR=00 INDEPENDENT NODE
> >ABD104 LU LOCADDR=00 INDEPENDENT NODE
> >ABD105 LU LOCADDR=00 INDEPENDENT NODE
> >ABD1L2 LU LOCADDR=02, 3270 LU2 SESSION *
> > DLOGMOD=M4G,MODETAB=M3278S
> >ABD1L3 LU LOCADDR=03, 3270 LU2 SESSION *
> > DLOGMOD=M4G,MODETAB=M3278S
> >ABD1A2 LU LOCADDR=12,USSTAB=USSNOMSG DEPENDENT LU FOR APPC
> >ABD1A3 LU LOCADDR=13,USSTAB=USSNOMSG DEPENDENT LU FOR APPC
> >ABD1A4 LU LOCADDR=14,USSTAB=USSNOMSG DEPENDENT LU FOR APPC
> >
> >3) We have CICS region name CICSB and below are VTAM defination
> >
> >
> > APPLCIC2 VBUILD TYPE=APPL
> >CICSB APPL ACBNAME=CICSB, NAME USED TO CONNECT TO VTAM X
> > AUTH=(ACQ,VPACE,PASS), ACQUIRE AND PASS DEVICES X
> > EAS=31, ESTIMATED NUMBER OF SESSIONS X
> > MODETAB=MODECICV, MODETABLE USED IF WE ARE SLU X
> > DLOGMOD=CICVLU62, DLOGMOD USED IF WE ARE SLU X
> > PARSESS=YES, MULTIPLE SESS WITH OTHER APPL X
> > SONSCIP=YES, USE SCIP EXIT IF WE ARE PLU X
> > APPC=NO, X
> > VPACING=5 VPACE TRAFFIC IF WE ARE SLU
> >
> >4) When I used to activate XCA and switched major node, I get below
> >messages and successfully gets activated.
> >
> >V NET,ACT,ID=XCA1200,SCOPE=ALL ----- XCA major node
> >IST097I VARY ACCEPTED
> >IST093I XCA1200 ACTIVE
> >IST1023E START I/O TIMEOUT OCCURRED FOR CUA=1200
> >
> >V NET,ACT,ID=SNABD,SCOPE=ALL --- Switch MAJOR NODE
> >IST097I VARY ACCEPTED
> >IST093I ABD1 ACTIVE
> >IST093I SNABD ACTIVE
> >
> >4) But by looking more into IBM manual, I have changed CPCP parameter in
> >VTAM from LEASED to YES using MODFIY command for this connection.
> >
> >5) Now, when I m activating XCA major node, it gets activated with below
> >message
> >
> >V NET,ACT,ID=XCA1200,SCOPE=ALL ----- XCA major node
> >IST097I VARY ACCEPTED
> >IST093I XCA1200 ACTIVE
> >IST1023E START I/O TIMEOUT OCCURRED FOR CUA=1200
> >
> >V NET,ACT,ID=SNABD,SCOPE=ALL --- Switch MAJOR NODE
> >IST097I VARY ACCEPTED
> >IST093I ABD1 ACTIVE
> >IST093I SNABD ACTIVE
> >
> > IST093I SNENG ACTIVE
> >IST380I ERROR FOR ID = L1200000 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200002 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200003 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200001 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200004 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200005 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200006 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200007 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200008 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L1200009 - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L120000A - REQUEST: ACTLINK, SENSE: 081C0000
> >IST380I ERROR FOR ID = L120000B - REQUEST: ACTLINK, SENSE: 081C0000
> >
> >I tried investigating this issue using below link but not able to find
> >solution.
> >
> >http://www-01.ibm.com/support/docview.wss?uid=swg21160618
> >
> >
> >6) From AIX side, we when I am trying for this connection, I am getting
> >below error.
> >
> >Link activation failed - adjacent link station *TST01* is not
> >responding.
> >
> >Adjacent station: MAC address = 00135ER7FA43 ( 00287AAB5LXC), SAP
> >address = 04
> >
> >Local station: MAC address = 0014C5D839B6 ( 00A7A3156C45), SAP
> >address = 04
> >
> >7) I also added below config in IBM Communication controller config file
> in
> >AIX to match with switched major node definition. I also used correct
> NETID
> >and SSCPNAME parameter in config file.
> >
> >[define_node]
> >cp_alias = ABD1
> >fqcp_name = TIMBA.ABD1
> >
> >Add a local LU definition to the Communication Server UNIX:
> >
> >[define_local_lu]
> >
> >lu_alias = ABD101
> >list_name = ""
> >description = ""
> >lu_name = ABD101
> >
> >
> >7) I also tried making connection from Mainframe to AIX box using ACT,PU
> >command that it successfully activated. But still this required connection
> >is not working.
> >
> >8) I am not sure, If I really need to implement OSA/SF also to make this
> >connection work. I feel this is optional feature not necessary to
> configure
> >at this stage.
> >
> >9) I also tried CPCP display command, but I don't see this connection .
> >
> >Please provide hint to resolve this issue
> >
> >----------------------------------------------------------------------
> >For IBM-MAIN subscribe / signoff / archive access instructions,
> >send email to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
