Cool, and some tinkering with that operator command shows the current setting:
$TJOBCLASS(TSU),TIME= Produces: $HASP837 JOBCLASS(TSU) $HASP837 JOBCLASS(TSU) AUTH=(ALL),BLP=NO,COMMAND=EXECUTE, $HASP837 CONDPURG=NO,DSENQSHR=ALLOW, $HASP837 IEFUJP=YES,IEFUSO=YES, $HASP837 JESCANCEL=ALLOWED,JESLOG=(NOSPIN), $HASP837 LOG=YES,MSGLEVEL=(1,1),MSGCLASS=K, $HASP837 OUTDISP=(PURGE,HOLD),OUTPUT=YES, $HASP837 PERFORM=000,PROMO_RATE=0, $HASP837 PROCLIB=00,QAFF=(ANY),REGION=0000K, $HASP837 SWA=ABOVE,TIME=(001440,00), $HASP837 TYPE26=YES,TYPE6=YES, $HASP837 RESOURCE(TG)=(LIMIT=DEFAULT, $HASP837 ACTION=DEFAULT), $HASP837 RESOURCE(JOE)=(LIMIT=DEFAULT, $HASP837 ACTION=DEFAULT),DESC= Tried it with other JOBCLASSes, such as STC, works there too. Now to see if it stays up overnight. Of course there ARE network hits sometimes (not our TCP/IP, I don't think, since I'm seeing the S522--or would I see that if TCP/IP was dropping me?) but I have another VPN up that's much more sensitive: if I get dropped with S522 and that VPN stays up, I at least know it wasn't connectivity at my end, I think. -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Mark Jacobs Sent: Wednesday, May 14, 2025 4:18 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: EXTERNAL Email: Re: Disable user timeout via JWT? In your JES2PARM member but you can change it dynamically too with an operator command. $TJOBCLASS(TSU),TIME=(1440) ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
