Hi Everyone, With the help of IBM, I was shows more up to date documentation of the BARCODE keywords the control the creation of QRCODEs.
I ended up with this code, that creates a correct QRCODE: DEFINE QR BARCODE QRCODE 2 HEIGHT 15 MM RATIO 1.01; POSITION 1 IN 1 IN; PLACE BARCODE QR CHAR 'HTTP://WWW.YNET.CO.IL' 2dparms qrcode cp500 10 m sequence 1 of 1 5 FNC1ucc; Gadi -----Original Message----- From: IBM Mainframe Discussion List <[email protected]> On Behalf Of Attila Fogarasi Sent: יום ג 20 יוני 2023 09:17 To: [email protected] Subject: Re: Creating a qr code using OGL I doubt OGL has changed in past 20 years. It does fully support barcodes (which is what I used OGL for) but I would be astonished if it has been extended to QR codes. OGL can embed graphics from PDS members, but I don't know how to create the graphic (it won't be jpeg). Finally OGL allows defining arbitrary printing using a bitmap at 240 pel per inch, so string of 1 and 0 where 1 prints a black pel at that position. You could construct QR code that way, should be possible to automate with scan. I guess Xerox still makes printers which use OGL, not sure what other printers are still supported. As for manual, google found several which look valid, https://det.wi.gov/Documents/ibm_overlay_generation_language_user_guide.pdf On Tue, Jun 20, 2023 at 3:14 PM Gadi Ben-Avi <[email protected]> wrote: > Hi, > Does anyone have an example to create a QR code using OGL. > The QR code should encode a url. > > Thanks > > Gadi > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
