Thank you, Brian. -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Brian Westerman Sent: Saturday, June 17, 2023 12:19 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: After installing z/OS 2.5 , we are not able to connect IP.
Sent by an external sender. Please be cautious about clicking on links and opening attachments. ---------------------------------------------------------------------------------------------------------------- First off you are missing OA61532, that's from 2021 and is for the CEEPIPI error. Next, secureport was removed and replaced by the ATTLS stuff that was developed quite a while back. IBM announced it was being removed back in 2020. IN this case, you could make it work anyway, but hte best thing to do would be to move to Secure TLS and get it over with, it will likely take you about an hour, and you can find simple directions at https://colinpaice.blog/2022/10/19/secure-x3270-to-z-os-on-adcd/ I think you could actually just cut/paste his parms and setup and use it almost without any changes. His examples have links to more detailed setup info on ATTLS. So your secure telnet parms (not the ones for port 23, which are okay, but not encrypted) would be something like: TelnetParms ; ATTLS defined secure port TTLSPort 992 ; DEBUG CONN DETAIL CTRACE DEBUG CONN trace CTRACE ConnType Secure ; Client chooses secure or nonsecure connection. EndTelnetParms In all, even counting reading his entire blog, shouldn't take you more than an hour or two. Brian ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
