I've looked at all those too. Nothing pops out at me. Mark Jacobs
Sent from ProtonMail, Swiss-based encrypted email. GPG Public Key - https://api.protonmail.ch/pks/lookup?op=get&[email protected] ------- Original Message ------- On Thursday, December 29th, 2022 at 3:56 PM, Patrick Loftus <[email protected]> wrote: > Perhaps see if the zfsadmin fsinfo commands reveal anything that might give a > clue: > https://www.ibm.com/docs/en/zos/2.4.0?topic=commands-zfsadm-fsinfo > > e.g. any shrink/salvage operations in progress, is it quiesced, what is the > status, any connected clients. > > I'd open a Case with IBM on this one if you have support. > > -----Original Message----- > From: IBM Mainframe Discussion List [email protected] On Behalf Of > Mark Jacobs > > Sent: 29 December 2022 20:15 > To: [email protected] > Subject: Re: ZFS Address Space, shared ENQ but filesystem isn't mounted > > Tried that. Didn't work. Told me that the file system that was contained in > the ZFS dataset was mounted somewhere. OMVS disagrees. > > Mark Jacobs > > Sent from ProtonMail, Swiss-based encrypted email. > > GPG Public Key - > https://api.protonmail.ch/pks/lookup?op=get&[email protected] > > > > > ------- Original Message ------- > On Thursday, December 29th, 2022 at 1:37 PM, Patrick Loftus > [email protected] wrote: > > > > > Consider the following command in that case: > > https://www.ibm.com/docs/en/zos/2.4.0?topic=commands-zfsadm-detach > > And have a look at the other zfsadm commands in that manual whilst you're > > there in case anything useful jumps out at you. > > > > Regards > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [email protected] On Behalf > > Of Mark Jacobs > > > > Sent: 29 December 2022 18:33 > > To: [email protected] > > Subject: Re: ZFS Address Space, shared ENQ but filesystem isn't > > mounted > > > > It does, yes. > > > > Mark Jacobs > > > > Sent from ProtonMail, Swiss-based encrypted email. > > > > GPG Public Key - > > https://api.protonmail.ch/pks/lookup?op=get&search=markjacobs@protonma > > il.com > > > > ------- Original Message ------- > > On Thursday, December 29th, 2022 at 1:20 PM, Patrick Loftus > > [email protected] wrote: > > > > > Does Unix command "zfsadm aggrinfo -system sysname" list the filesystem > > > concerned, where sysname is the sysname of the one showing the enqueue by > > > ZFS? > > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List [email protected] On > > > Behalf Of Mark Jacobs > > > > > > Sent: 29 December 2022 15:06 > > > To: [email protected] > > > Subject: Re: ZFS Address Space, shared ENQ but filesystem isn't > > > mounted > > > > > > OMVS doesn't have that file system in its list of mounted file systems, > > > so the OMVS unmount command fails just like the TSO umount command does. > > > > > > Mark Jacobs > > > > > > Sent from ProtonMail, Swiss-based encrypted email. > > > > > > GPG Public Key - > > > https://api.protonmail.ch/pks/lookup?op=get&search=markjacobs@proton > > > ma > > > il.com > > > > > > ------- Original Message ------- > > > On Thursday, December 29th, 2022 at 9:46 AM, Shelia Chalk > > > [email protected] wrote: > > > > > > > Mark, > > > > > > > > I also have a batch job if you need that also. > > > > > > > > //INSTALL EXEC PGM=BPXBATCH,REGION=0M //STDPARM DD * SH > > > > /usr/xxx/unmount -f OMVS.xxx.xxx.ZFS > > > > /* > > > > //SYSMDUMP DD SYSOUT=* > > > > //STDOUT DD SYSOUT=* > > > > //STDERR DD SYSOUT=* > > > > > > > > Or > > > > //STDPARM DD * > > > > SH > > > > /usr/xxx/unmount -f OMVS.xxxx.xxx.ZFS immediate; > > > > /* > > > > > > > > Thanks > > > > Shelia C > > > > > > > > -----Original Message----- > > > > From: IBM Mainframe Discussion List [email protected] On > > > > Behalf Of Shelia Chalk > > > > > > > > Sent: Thursday, December 29, 2022 8:39 AM > > > > To: [email protected] > > > > Subject: Re: ZFS Address Space, shared ENQ but filesystem isn't > > > > mounted > > > > > > > > Have you tried this command from omvs /usr/xxxn/xxxxt -f > > > > OMVS.xxxx.xxxx.Sxxxx.ZFS immediate > > > > > > > > Shelia C > > > > > > > > -----Original Message----- > > > > From: IBM Mainframe Discussion List [email protected] On > > > > Behalf Of Mark Jacobs > > > > > > > > Sent: Thursday, December 29, 2022 7:14 AM > > > > To: [email protected] > > > > Subject: Re: ZFS Address Space, shared ENQ but filesystem isn't > > > > mounted > > > > > > > > That would likely be externalized as a different error. > > > > > > > > Mark Jacobs > > > > > > > > Sent from ProtonMail, Swiss-based encrypted email. > > > > > > > > GPG Public Key - > > > > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapi. > > > > protonmail.ch%2Fpks%2Flookup%3Fop%3Dget%26search%3Dmarkjacobs%40pr > > > > oton > > > > mail.com&data=05|01|SChalk%40TRUSTMARK.COM|928c85cfe590470e267308d > > > > ae9a > > > > a6c2e|518d66eacb8948c8a7b903cba11cde91|1|0|638079215412860872|Unknown| > > > > TWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLC > > > > JXVC > > > > I6Mn0%3D|3000|||&sdata=PtHOnrHn8OiYC3dzyGeI37XySpf2hn0DEHxVogpd%2F > > > > NQ%3 > > > > D&reserved=0 > > > > > > > > ------- Original Message ------- > > > > On Thursday, December 29th, 2022 at 7:24 AM, Ituriel do Neto > > > > [email protected] wrote: > > > > > > > > > Maybe there is a subdirectory pointing to another ZFS still > > > > > mounted > > > > > > > > > > Best Regards > > > > > > > > > > Ituriel do Nascimento Neto > > > > > z/OS System Programmer > > > > > > > > > > Em quinta-feira, 29 de dezembro de 2022 09:04:24 BRT, Mark Jacobs > > > > > [email protected] escreveu: > > > > > > > > > > It came back with a file system not found message. > > > > > > > > > > Mark Jacobs > > > > > > > > > > Sent from ProtonMail, Swiss-based encrypted email. > > > > > > > > > > GPG Public Key - > > > > > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapi. > > > > > protonmail.ch%2Fpks%2Flookup%3Fop%3Dget%26search%3Dmarkjacobs%40 > > > > > prot > > > > > on > > > > > mail.com&data=05%7C01%7CSChalk%40TRUSTMARK.COM%7C6a5317e9c0914f9 > > > > > 38a1 > > > > > c0 > > > > > 8dae99e8fe7%7C518d66eacb8948c8a7b903cba11cde91%7C1%7C0%7C6380791 > > > > > 6448 > > > > > 99 > > > > > 89557%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMz > > > > > IiLC > > > > > JB > > > > > TiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=7V8iwZF5ZUuVYMJ > > > > > YnYO > > > > > 6i > > > > > Q4bbKJJDEAGVj0rBiMtE%2B4%3D&reserved=0 > > > > > > > > > > ------- Original Message ------- On Wednesday, December 28th, > > > > > 2022 at 11:46 PM, Lizette Koehler [email protected] wrote: > > > > > > > > > > > I apologize if this has been asked and answered; > > > > > > > > > > > > what does a D OMVS,F,N= xN is the name of the MVS filesystem > > > > > > > > > > > > Sometimes it is not freed with a UNMOUNT FILESYS= because > > > > > > other mounts are still active > > > > > > > > > > > > -----Original Message----- > > > > > > From: IBM Mainframe Discussion List [email protected] > > > > > > On Behalf Of Mark Jacobs > > > > > > > > > > > > Sent: Wednesday, December 28, 2022 2:43 PM > > > > > > To: [email protected] > > > > > > Subject: Re: ZFS Address Space, shared ENQ but filesystem > > > > > > isn't mounted > > > > > > > > > > > > I issued a D GRS,RES=(*,name.of.file.system) command and it showed > > > > > > me that ZFS had it allocated as shared on one system in the > > > > > > sysplex. No other address space had the enqueue. > > > > > > > > > > > > Mark Jacobs > > > > > > > > > > > > Sent from ProtonMail, Swiss-based encrypted email. > > > > > > > > > > > > GPG Public Key - > > > > > > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2 > > > > > > F%2F > > > > > > ap > > > > > > i.protonmail.ch%2Fpks%2Flookup%3Fop%3Dget%26search%3Dmarkjacob > > > > > > s%40 > > > > > > pr > > > > > > otonmail.com&data=05%7C01%7CSChalk%40TRUSTMARK.COM%7C6a5317e9c > > > > > > 0914 > > > > > > f9 > > > > > > 38a1c08dae99e8fe7%7C518d66eacb8948c8a7b903cba11cde91%7C1%7C0%7 > > > > > > C638 > > > > > > 07 > > > > > > 9164489989557%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQ > > > > > > Ijoi > > > > > > V2 > > > > > > luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=7V8 > > > > > > iwZF > > > > > > 5Z > > > > > > UuVYMJYnYO6iQ4bbKJJDEAGVj0rBiMtE%2B4%3D&reserved=0 > > > > > > > > > > > > ------- Original Message ------- On Wednesday, December 28th, > > > > > > 2022 at 4:19 PM, Shelia Chalk > > > > > > [email protected] wrote: > > > > > > > > > > > > > Mark, > > > > > > > > > > > > > > Have you tried going to 3.4 put in the zfs address space > > > > > > > dataset and in the command field type in whohas This will tell > > > > > > > who has the dataset. > > > > > > > > > > > > > > Thanks > > > > > > > Shelia C > > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: IBM Mainframe Discussion List [email protected] > > > > > > > On Behalf Of Mark Jacobs > > > > > > > > > > > > > > Sent: Wednesday, December 28, 2022 11:53 AM > > > > > > > To: [email protected] > > > > > > > Subject: ZFS Address Space, shared ENQ but filesystem isn't > > > > > > > mounted > > > > > > > > > > > > > > The ZFS address space has a shared enqueue on one of our ZFS file > > > > > > > systems, but when I attempt to unmount it ZFS says it's not > > > > > > > mounted. I attempted to manually mount it, failed with a > > > > > > > filesystem is busy error. Any ideas on how to release the enqueue > > > > > > > so I can delete the file system? > > > > > > > > > > > > > > Mark Jacobs > > > > > > > > > > > > > > Sent from ProtonMail, Swiss-based encrypted email. > > > > > > -------------------------------------------------------------------- > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to [email protected] with the message: INFO > > > IBM-MAIN > > > > > > -------------------------------------------------------------------- > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to [email protected] with the message: INFO > > > IBM-MAIN > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to [email protected] with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to [email protected] with the message: INFO IBM-MAIN > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
