On Sun, 9 Oct 2022 10:34:12 -0400 Mike Shaw <[email protected]> wrote:
:>The z/PDT emulator supports 3270E connection to the Linux side of the box. :>If you have a 3270port statement in your IPL profile, it will specify the :>local port number that you can use to connect to z/OS via the Linux side of :>the box. That bypasses TCP/IP altogether. Mine specifies port 3270. :>If you define a new session to QWS3270 and specify the name or IP address :>of the Linux side of the box and a port number of 3270, you can connect :>(non-securely) to that port and appear as a channel-attached local 3270 to :>z/OS. BTW, is there a standard FTP like 3270 mapping to 23? :>Does that method eliminate the problem you are seeing? :>Mike Shaw :>MVS/QuickRef Support Group :>Chicago-Soft, Ltd. :>On Sun, Oct 9, 2022 at 7:55 AM Binyamin Dissen <[email protected]> :>wrote: :>> On Fri, 7 Oct 2022 10:05:13 -0400 Mike Shaw <[email protected]> :>> wrote: :>> :>We use QWS3270 on a z/PDT and we have not seen that problem. Are you :>> :>running as a locally attached 3270 device address or through TCP/IP :>> :>remotely? :>> TCP/IP, appears to be thru a gateway. > :>> :>On Fri, Oct 7, 2022, 6:17 AM Binyamin Dissen <[email protected] :>> :>wrote: :>> :>> I am having a strange issue running QWS3270 against a zPDT system (two :>> :>> different systems). The screen goes completely blank after a few :>> seconds of :>> :>> inactivity. :>> :>> Quick3270 Secure works fine. :>> :>> Anyone else run into this? -- Binyamin Dissen <[email protected]> http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
