I also wanted to ask if anyone could share the proper 3 phase to single phase wiring for the power cable...
You need the right power cable!!! The connections are in the z114 redbook. Joe On Sat, May 28, 2022 at 9:28 AM Enzo D'Amato <edam...@octechservices.org> wrote: > This is about what I expected in terms of CPU and memory, but I have no > idea what happened with the expansion cards. I almost certainly will not > use 18 ficon ports anyway, so I am not too upset about those ports. Either > way, I will ask the seller what happened with the extra channel cards. I > also wanted to ask if anyone could share the proper 3 phase to single phase > wiring for the power cable (I know the z114 BPRs can take 220v single > phase). I am checking the technical and physical planning guides for this > information, but I would like to independently verify this information so > that I don't fry my new machine. > > Thanks, > Enzo Damato > ________________________________________ > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> on behalf > of Tom Brennan <t...@tombrennansoftware.com> > Sent: Friday, May 27, 2022 2:18 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: my new z114 > > I was able to download the config information, but it doesn't seem to > match what you reported. So it could be I'm looking at something else. > Here's a summary - I'll assume you don't mind me posting it here since > many people here want to help. > > z114 2818-M05-A01 485F7 > 26 MIPS, 3 MSU > 40 GB > 18 ports FICON 8S SX > 8 ports OSA 3-2P 1000BASE-T > STP > CPACF > 1 HMC Tower > 2 Power cables - 14ft 200V 30A 3Ph Line > > On 5/27/2022 9:18 AM, Enzo D'Amato wrote: > > I have a model 2818 with s/n 02-485F7. I am fairly sure that I have a > relatively low CPU capacity number, and all my unused PCIE card slots have > blank fillers, but 2 of my I/O drawer slots are empty (no card or filler). > If you can do a lookup, I would appreciate it. > > > > Thank you, > > Enzo Damato > > ________________________________________ > > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> on > behalf of Tom Brennan <t...@tombrennansoftware.com> > > Sent: Friday, May 27, 2022 11:53 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Re: my new z114 > > > > Do you know the serial number? It's typically on a small label on the > > front door. With that, someone from IBM (or maybe even me, I'm not > > sure) can go to IBM's Inventory Services and get the configuration data > > that was uploaded the last time the machine was connected to IBM's "call > > home" network. That data includes model, CP speed and count, cards, and > > other items. And if that data matches your card count, that's a good > > sign nobody has been picking spare parts out of the box. > > > > On 5/27/2022 7:43 AM, Enzo D'Amato wrote: > >> Parwez is correct that this is a M05 model, I will let you know what I > have in terms of processor capacity as soon as I finish setting up power > and turn it on. I in terms of my IO card configuration, this is what I > currently have in the box: > >> 2 2 port pcie 8g ficon cards (pcie) > >> 2 2 port rj45 Ethernet cards (pcie) > >> 1 4 port ficon card (IO drawer) > >> 2 16 port escon cards (IO drawer) > >> > >> I did want to ask however, do that crypto express cards and OSA > adapters require LICCC codes to enable? Most of my home network is 10GbE, > and I wanted to put one of those cards in so I can directly network it to > my core switch, but I don't want to order one if it will not activate. I am > currently working on sourcing FICON storage, and I will update you if I > make any headway on that front. I also have a plan and I think I will be > able to get some mainframe attached virtual tape set up. As Harry > recommended, I do plan on doing some experimenting with the bare metal on > the machine, but I don't have much experience with embedded/bare metal > programming, so I would really be starting from the ground up with that. I > would like to get in contact with someone about getting software > disks/licences for my machine. I know that you said that it would be a > special order as the software is withdrawn from marketing, but considering > the circumstances, it may not hurt to ask. I would also like to look into > what would be involved in getting a LICCC capacity upgrade (the z114 is not > completely out of support until the end of this year). If you know anyone > who I should reach out to, please let me know. > >> > >> I am quite close to both the z/VM and Marist events (I am like 20 > minutes from the IBM Poughkeepsie plant), but I will have to check my > calendar to see if I can make them (I should be able to, but I may have > finals that week. I will have to check). > >> > >> I will keep this list updated as I make progress and work on getting > the system set up. > >> Thank you, > >> Enzo Damato > >> ________________________________________ > >> From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> on > behalf of Timothy Sipples <sipp...@sg.ibm.com> > >> Sent: Friday, May 27, 2022 6:04 AM > >> To: IBM-MAIN@LISTSERV.UA.EDU > >> Subject: Re: my new z114 > >> > >> Enzo, > >> > >> Congratulations on your acquisition! > >> > >> I’m curious if you happen to know yet the physical model (it’ll be > either 2818-M05 or 2818-M10) and general capacity details, notably the > capacity model, number/type(s) of specialty engines (if any; IFLs, zIIPs, > ICFs), and memory configuration. The capacity model is a letter (A to Z), > the number 0, and a number 0 to 5. For example, Q02. [A00 would be > unfortunate since that’d mean no general purpose engines (CPs) are > configured. If it’s a Z05 you won this lottery, but really any CP capacity > is fine for a home lab.] Also, have you figured out yet what features you > have installed in the I/O slots? > >> > >> As I think I mentioned, if you have a 2818-M10 and/or lots of I/O > features you might be able to (unofficially, after very careful study) > field modify the physical configuration so that you’re powering fewer > components to reduce electricity consumption and heat output in your home > lab. But if you have a -M05 with just a few I/O features then this’ll be a > moot point. > >> > >> I wonder if the machine has any Crypto Express adapters. > >> > >> I really like the suggestion to visit the z/VM conference if you can. > There are bound to be many curious and knowledgeable people there. If 21st > Century Software happens to be at that conference then you could ask them > about VSEn 6.3 if that interests you. There’s also a mainframe conference > coming up at Marist College in Poughkeepsie, New York, from June 12 to 14, > if convenient. > >> > >> https://ecc.marist.edu/web/conference2022 > >> > >> Operating systems that do not require ECKD/FICON-attached storage > (technically, leaving any licensing issues aside): Linux, z/VM, z/VSE, > VSEn. Possibly also MUSIC/SP, as a guest of z/VM anyway, but I’m guessing a > bit. I think you can start the z/OS Customized Offerings Driver without > actually having any attached storage, but then you can’t do that much with > it. > >> > >> Operating systems that require ECKD/FICON-attached storage: z/OS, > z/TPF. (z/TPF is even a little more particular about minimum storage > configurations. I believe it requires some physical or virtual tape as > well.) > >> > >> There are some bootable “mini things” that people don’t generally > consider operating systems but that do serve useful functions. Standalone > IOCP and Jan Jaeger’s ZZSA are two good examples. > >> > >> Good luck, and please keep us posted. > >> > >> — — — — — > >> Timothy Sipples > >> Senior Architect > >> Digital Assets, Industry Solutions, and Cybersecurity > >> IBM zSystems/LinuxONE, Asia-Pacific > >> sipp...@sg.ibm.com > >> > >> > >> ---------------------------------------------------------------------- > >> For IBM-MAIN subscribe / signoff / archive access instructions, > >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >> > >> ---------------------------------------------------------------------- > >> For IBM-MAIN subscribe / signoff / archive access instructions, > >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >> . > >> > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > . > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
