Yes. As Rex pointed out, the first part of the output in the SMPRPT DD
statement will be the listing of what PTF's did NOT go on, and why. You'll
want to review that, and make sure the only ones that did not go on were the
ones with Errorhold. If a PTF you wanted to go on didn't, it will show here
(MODID error for example if you have a usermod), or a space problem on a target
dataset, etc.
Here is an example of a APPLY I ran today. One PTF didn't not go on, because
it is in error.
CAUSER SYSMOD SUMMARY REPORT FOR APPLY PROCESSING
CAUSER FMID MESSAGE ID PAGE ERROR DESCRIPTION AND POSSIBLE CAUSES
UJ02757 HDZ2240 GIM35901I 1 ERROR HOLD CA59681 WAS NOT RESOLVED.
PAGE 0003 - NOW SET TO TARGET ZONE MVSTZN DATE 06/22/20 TIME 07:43:25
SMP/E 37.05 SMPRPT OUTPUT
UNRESOLVED HOLD REASON REPORT FOR APPLY PROCESSING
NOTE: THE SYSMODS LISTED IN THIS REPORT ALSO APPEAR IN THE CAUSER SYSMOD
SUMMARY REPORT.
HOLD MISSING HELD RESOLVING RESOLVER
TYPE FMID CLASS APAR SYSMOD SYSMOD STATUS
------ ------- ------- ------- ------- --------- --------
ERROR HDZ2240 PE CA59681 UJ02757
PAGE 0004 - NOW SET TO TARGET ZONE MVSTZN DATE 06/22/20 TIME 07:43:25
SMP/E 37.05 SMPRPT OUTPUT
_____________________________________________________________________________________________________
Dave Jousma
AVP | Manager, Systems Engineering
Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI
49546
616.653.8429 | fax: 616.653.2717
-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of
Edgington, Jerry
Sent: Monday, June 22, 2020 9:48 AM
To: [email protected]
Subject: Re: SMP/e maintenance methodologies
**CAUTION EXTERNAL EMAIL**
**DO NOT open attachments or click on links from unknown senders or unexpected
emails**
Dave,
So, if you get RC=8, you run the Apply anyway, just letting SMP/e determine
what PTFs can be applied, correct? If that is the case, that would simplify
the SMP/e apply process.
Thanks,
Jerry
-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of
Jousma, David
Sent: Monday, June 22, 2020 7:57 AM
To: [email protected]
Subject: Re: SMP/e maintenance methodologies
This message was sent from an external source outside of Western & Southern's
network. Do not click links or open attachments unless you recognize the sender
and know the contents are safe.
________________________________________________________________________________________________________________________
I do not attempt to get a RC0 or RC4 apply. What goes on goes on. Obviously
review results to make sure that there wasn't an issue, but coding up a bunch
of excludes to not select those with holderror just to get a RC0 is not
necessary in my opinion.
Here is one apply example
APPLY CHECK
SOURCEID (
SYSPLXDS
XSYSTEM
HIPER
IBM.*
RSU*
SECINT
)
GROUPEXTEND
(
NOAPARS
NOUSERMODS
)
BYPASS ( HOLDSYSTEM)
NOJCLINREPORT
RETRY ( YES )
.
_____________________________________________________________________________________________________
Dave Jousma
AVP | Manager, Systems Engineering
Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI
49546
616.653.8429 | fax: 616.653.2717
-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of
Edgington, Jerry
Sent: Monday, June 22, 2020 7:42 AM
To: [email protected]
Subject: SMP/e maintenance methodologies
**CAUTION EXTERNAL EMAIL**
**DO NOT open attachments or click on links from unknown senders or unexpected
emails**
Hello everyone,
I am looking for SMP/e methodologies about a couple of situations within SMP/e.
Just looking for how people do SMP/e maintenance in certain situations.
1) What methodology is employed to get to a clean Apply Check, when you
outstanding Error Holds? APARs without PTFs, local fix or work arounds?
2) For Apply check, what PARMs do you use? Select, FixCat, Bypass, etc?
I was taught a SMP/e methodology, many years ago, but just wondering if there
might be a better way.
Thanks,
Jerry Edgington
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN **CAUTION EXTERNAL
EMAIL**
**DO NOT open attachments or click on links from unknown senders or unexpected
emails**
This e-mail transmission contains information that is confidential and may be
privileged. It is intended only for the addressee(s) named above. If you
receive this e-mail in error, please do not read, copy or disseminate it in any
manner. If you are not the intended recipient, any disclosure, copying,
distribution or use of the contents of this information is prohibited. Please
reply to the message immediately by informing the sender that the message was
misdirected. After replying, please erase it from your computer system. Your
assistance in correcting this error is appreciated.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN **CAUTION EXTERNAL
EMAIL**
**DO NOT open attachments or click on links from unknown senders or unexpected
emails**
This e-mail transmission contains information that is confidential and may be
privileged. It is intended only for the addressee(s) named above. If you
receive this e-mail in error, please do not read, copy or disseminate it in any
manner. If you are not the intended recipient, any disclosure, copying,
distribution or use of the contents of this information is prohibited. Please
reply to the message immediately by informing the sender that the message was
misdirected. After replying, please erase it from your computer system. Your
assistance in correcting this error is appreciated.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
