W dniu 12.06.2020 o 00:34, Christian Svensson pisze:
Hi,

A bit of a niche question maybe, but this list usually enjoys those!

I need to move my z114, and sadly I don't have the possibility of
inspecting it physically right now. I was wondering if anyone knows if it
is possible to reduce the height of the z114?
In the IMPP there is a FC 9975 which separates the top portion in the
installation, but I have no idea if my individual has that feature.
Looking at older pictures of the frame there appears to be a "cut" between
the BPA and where the battery is supposed to be, so it looks like maybe
removing the side panels, the door, and then one might be able to detach
the top - but that's hard to say for sure on the pictures.

Does anyone have any experience removing the top portion for
transportation of a z114? Or similar experiences?


The height reduction is not different machine, it is just difference in packaging.
So, after the machine is installed there is no difference.
Regarding you problem - you want to dismount your existing machine. Perhaps no under warranty.
Yes, it is possible. Is is simple? Well, I did it.
It is simpler to pay some engineers to do it *and take responsibility*, but it is not black magic. Some keys and screwdrivers, sheet of paper and vinyl tape to correctly document unplugged cables.

--
Radoslaw Skorupka
Lodz, Poland





======================================================================

Jeśli nie jesteś adresatem tej wiadomości:

- powiadom nas o tym w mailu zwrotnym (dziękujemy!),
- usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś 
na dysku).
Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać 
tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza) 
tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać 
karze.

mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 
Warszawa,www.mBank.pl, e-mail: [email protected]. Sąd Rejonowy dla m. st. 
Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 0000025237, 
NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na 
01.01.2020 r. wynosi 169.401.468 złotych.

If you are not the addressee of this message:

- let us know by replying to this e-mail (thank you!),
- delete this message permanently (including all the copies which you have 
printed out or saved).
This message may contain legally protected information, which may be used 
exclusively by the addressee.Please be reminded that anyone who disseminates 
(copies, distributes) this message or takes any similar action, violates the 
law and may be penalised.

mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950 
Warszawa,www.mBank.pl, e-mail: [email protected]. District Court for the Capital 
City of Warsaw, 12th Commercial Division of the National Court Register, KRS 
0000025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN 
169.401.468 as at 1 January 2020.

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to