Hello,
I have a question regarding TPI (Test Pending Interrupt).
I understand that CPENABLE compares the TPI value to thresholds in CPENABLE. I
can’t find which value is used in this comparison. I am assuming a value of
(10,30) for CPENABLE. Does it look at the individual value for each CP
(indicated by “*” in the example below) or the total percentage for all TPI
interrupts (indicated by “+”) ?
I include an example below.
z/OS V1R11 SYSTEM ID P101 DATE 11/20/2012
INTERVAL 14.59.996
RPT VERSION V1R11 RMF TIME 05.30.00
CYCLE 1.000 SECONDS
-CPU 2098 CPC CAPACITY 173 SEQUENCE CODE 0000000000062E16
MODEL T05 CHANGE REASON=N/A HIPERDISPATCH=NO
H/W MODEL E10
0---CPU--- ---------------- TIME % ---------------- LOG PROC --I/O
INTERRUPTS--
NUM TYPE ONLINE LPAR BUSY MVS BUSY PARKED SHARE % RATE
% VIA TPI
0 CP 100.00 19.01 18.99 ------ 80.0 479.7
22.04 (*)
1 CP 100.00 19.37 19.35 ------ 80.0 470.5
24.72
2 CP 100.00 18.77 18.74 ------ 80.0 470.3
21.49
3 CP 100.00 18.78 18.76 ------ 80.0 482.7
22.27
4 CP 100.00 18.36 18.35 ------ 80.0 749.0
6.78
TOTAL/AVERAGE 18.86 18.84 400.0 2652
18.15 (+)
Michael Hall
President
Millennium II Inc.
3317 16th Street NW
Washington, DC USA 20010
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
