and wait 7 hours. On Mon, May 28, 2012 at 9:30 PM, af dc <[email protected]> wrote:
> Hello, > basically those are main issues to take care, what i usually do on ts7740 > is: > > 1) 30mins before outage, vary all virtual addresses offline. Maybe there's > jobs still running. > 2) Put on hold all dfhsm tape functions > 3)Verify is all virtual addresses are offline > 4) Libs off > 5) Channels off > 6) inihibt reclaim > > Deliver box to hw. > A.Cecilio. > > > > On Wed, May 16, 2012 at 10:29 PM, David G. Schlecht < > [email protected]> wrote: > >> We’ve switched to using the TS7720 as a stand-alone VTS and are planning >> an outage this weekend for microcode upgrade. >> >> In the old days, for an outage we had to: >> >> 1. Vary the libraries offline >> >> 2. Vary the drives offline >> >> 3. Vary the chanel paths offline >> >> 4. When varying the final drives off line, we had to use Force >> because they were the last attached devices. >> >> Looking over the Planning and Intro book and the Virtual Engine book >> (SG24-7712-02) it appears the same procedures are needed for today’s VTS. >> Is there anything else that is required or something else to watch for with >> today’s TS7700? >> >> >> David G. Schlecht | Information Technology Professional >> State of Nevada | Department of Administration | Enterprise IT Services >> T:(775)684-4328 | F: (775) 684‐4324 | E:[email protected] <-- New >> Address >> >> >> ________________________________ >> This communication, including any attachments, may contain confidential >> information and is intended only for the individual or entity to which it >> is addressed. Any review, dissemination or copying of this communication by >> anyone other than the intended recipient is strictly prohibited. If you are >> not the intended recipient, please contact the sender by reply e-mail and >> delete all copies of the original message. >> >> ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to [email protected] with the message: INFO IBM-MAIN >> > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
