I just looked at the cversion.c member and I guess this code doesn't like the
backslashes escapes.
As these are lines 83 and 85 of the source.
#ifdef CFLAGS
static char bufÝsizeof(CFLAGS)+11¨;
BIO_snprintf(buf,sizeof buf,"compiler: %s",CFLAGS);
return(buf);
Thanks
Ms. Terri E. Shaffer
[email protected]
Engineer
J.P.Morgan Chase & Co.
GTI DCT ECS Core Services zSoftware Group / Emerging Technologies
Office: # 614-213-3467
Cell: # 412-519-2592
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of
Shaffer, Terri E
Sent: Tuesday, April 10, 2012 2:52 PM
To: [email protected]
Subject: Re: openssl make - z/OS UNIX question - Help
Hi Kirk,
I figured out the backslashes in the Configure file on my own with the help
of google searches, so I was able to get past passing the compiler parm issue.
After it completed:
I had to edit the makefile and change the cflag for langlvl and put back the
backslashes.
CC= xlc
CFLAG= -DOPENSSL_THREADS -O -DB_ENDIAN -DCHARSET_EBCDIC -DNO_SYS_PARAM_H
-D_ALL_SOURCE -W c,xplink,langlvl\(longlong\) DEPFLAG=
-DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -D
OPENSSL_NO_MD2 -DOPENSSL_NO_RC4 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779
-DOPENSSL_NO_SCTP -DOPENSSL_NO_STORE
I tried double backslashes also and that caused other issues when I got to the
gmake install but the Configure liked them.
But the makefile was missing the backslashes, so I still had to edit.
Everything else I think looked okay.
I was then able to issue the gmake install command and my next round of
problems started occurring.
The first thing I will say this runs about 20 minutes until it stops even with
the first 4 issues for ignored.
xlc -I. -I.. -I../include -DOPENSSL_THREADS -O -DB_ENDIAN -DCHARSET_EBCDIC -DN
O_SYS_PARAM_H -D_ALL_SOURCE -W c,xplink,langlvl\(longlong\) -c -o cversion.o
cversion.c
WARNING CCN3235 ./cversion.c:83 Incorrect escape sequence \(. \ ignored.
WARNING CCN3235 ./cversion.c:83 Incorrect escape sequence \). \ ignored.
WARNING CCN3235 ./cversion.c:85 Incorrect escape sequence \(. \ ignored.
WARNING CCN3235 ./cversion.c:85 Incorrect escape sequence \). \ ignored.
Goes thru many directories within the crypto directory until it hits this
error.
xlc -I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include
-DOPENSSL_THREAD S -O -DB_ENDIAN -DCHARSET_EBCDIC -DNO_SYS_PARAM_H
-D_ALL_SOURCE -W c,xplink,lan
glvl\(longlong\) -c -o b_sock.o b_sock.c
ERROR CCN3045 ./b_sock.c:888 Undeclared identifier NI_MAXHOST.
ERROR CCN3195 ./b_sock.c:888 Integral constant expression with a value greater
than zero is required.
ERROR CCN3045 ./b_sock.c:888 Undeclared identifier NI_MAXSERV.
ERROR CCN3195 ./b_sock.c:888 Integral constant expression with a value greater
than zero is required.
CCN0793(I) Compilation failed for file ./b_sock.c. Object file not created.
gmakeÝ2¨: *** Ýb_sock.o¨ Error 12
gmakeÝ2¨: Leaving directory `/u/w012108/temp/openssl-1.0.1/crypto/bio'
gmakeÝ1¨: *** Ýsubdirs¨ Error 1
gmakeÝ1¨: Leaving directory `/u/w012108/temp/openssl-1.0.1/crypto'
gmake: *** Ýbuild_crypto¨ Error 1
I looked at the b.sock file and see char hÝNI_MAXHOST¨,sÝNI_MAXSERV¨;
I can also see .o members for many members that look like they worked.
I understand about the codepage and my displays but not sure that would cause
the make issues?
At this stage I am not sure If I have a code issue with 1.0.1 version or
something else I did wrong?
Any ideas you have or if you try it is great. Tomorrow or Thursday or whenever
is fine for a response, I just appreciate everything you have provided so far.
My last option could be to download the previous version and try that to see if
some of these new errors go away.
Thanks
Ms. Terri E. Shaffer
[email protected]
Engineer
J.P.Morgan Chase & Co.
GTI DCT ECS Core Services zSoftware Group / Emerging Technologies
Office: # 614-213-3467
Cell: # 412-519-2592
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of
Kirk Wolf
Sent: Tuesday, April 10, 2012 1:19 PM
To: [email protected]
Subject: Re: openssl make - z/OS UNIX question - Help
David is right about your encoding. Make sure that you have: export
LANG=C which is the default.
But the problem might be that you are running the z/OS Unix shell under TSO
OMVS. If so, set the encoding of your TN3270 emulator to be IBM-1047.
Even better would be to use ssh to login to a tty shell directly.
But I don't think that this is your only problem...
Since Configure builds a make file, then these command arguments are passed
through the shell. It looks to me like the parenthesis in
langlvl(longlong) need to be somehow quoted or escaped. This is tricky,
since the string is supplied as part of a Perl variable (in Configure).
So try adding a backslash like this:
...langlvl\(longlong\)....
if that doesn't work, try double backslashes.
if that doesn't work, let me know and I'll try playing around with this
release myself. I probably won't get to it today though.
Kirk Wolf
Dovetailed Technologies
http://dovetail.com
On Tue, Apr 10, 2012 at 9:55 AM, David Crayford <[email protected]> wrote:
> Make sure you are using the right codepage. Are you sure you are
> running the shell in 1047? looks like it may be 037 judging by the
> mangled square brackets
>
>
> On 10/04/2012 10:46 PM, Shaffer, Terri E wrote:
>
>> Hi Kirk,
>> Not sure about the extra asterisks, I copied your example at the
>> beginning of this email and pasted into my Configure file.
>>
>> I did make it into 1 long line then.
>>
>> I don't know too much, or pretty much nothing about how these parms
>> should look, so I am sortof at a loss and try a few things before I
>> respond. I took your new example and pasted into my Configure and
>> again made it into 1 long line.
>>
>> The Configure works and received Configured for *OS/390*.
>>
>> When I tried to the gmake install I get
>> W012108:SDEV(DEV):/u/w012108/**temp/openssl-1.0.1> gmake install
>> making all in crypto...
>> gmakeÝ1¨: Entering directory `/u/w012108/temp/openssl-1.0.**1/crypto'
>> xlc -I. -I.. -I../include -DOPENSSL_THREADS -O -DB_ENDIAN
>> -DCHARSET_EBCDIC -DN
>> O_SYS_PARAM_H -Wc,xplink,langlvl(longlong) -D_ALL_SOURCE -c -o
>> cryptlib.o cryptlib.c
>> syntax error: got (, expecting Newline
>> gmakeÝ1¨: *** Ýcryptlib.o¨ Error 1
>> gmakeÝ1¨: Leaving directory `/u/w012108/temp/openssl-1.0.**1/crypto'
>> gmake: *** Ýbuild_crypto¨ Error 1
>>
>> So it looks like there is something wrong with the specification but
>> not sure what?
>>
>> I tried looking at the OSXL C/C++User's Guide but there are really no
>> examples on how this would be specified in the perl script.
>>
>> I appreciate your help and sorry to be lost.
>>
>> Thanks
>>
>> Ms. Terri E. Shaffer
>> [email protected]
>> Engineer
>> J.P.Morgan Chase& Co.
>>
>>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN This communication is for
informational purposes only. It is not intended as an offer or solicitation for
the purchase or sale of any financial instrument or as an official confirmation
of any transaction. All market prices, data and other information are not
warranted as to completeness or accuracy and are subject to change without
notice. Any comments or statements made herein do not necessarily reflect those
of JPMorgan Chase & Co., its subsidiaries and affiliates.
This transmission may contain information that is privileged, confidential,
legally privileged, and/or exempt from disclosure under applicable law. If you
are not the intended recipient, you are hereby notified that any disclosure,
copying, distribution, or use of the information contained herein (including
any reliance
thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments
are believed to be free of any virus or other defect that might affect any
computer system into which it is received and opened, it is the responsibility
of the recipient to ensure that it is virus free and no responsibility is
accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as
applicable, for any loss or damage arising in any way from its use. If you
received this transmission in error, please immediately contact the sender and
destroy the material in its entirety, whether in electronic or hard copy
format. Thank you.
Please refer to http://www.jpmorgan.com/pages/disclosures for disclosures
relating to European legal entities.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
