JOBCLASS(STC) AUTH=(ALL),BLP=YES,COMMAND=IGNORE,
CONDPURG=NO,IEFUJP=NO,IEFUSO=NO,
JESLOG=(NOSPIN),LOG=NO,MSGLEVEL=(2,
1),MSGCLASS=7,OUTDISP=(,),
OUTPUT=YES,PERFORM=000,PROCLIB=00,
QAFF=(ANY),REGION=0004M,SWA=ABOVE,
TIME=(000030,00),TYPE26=NO,
TYPE6=NO,XEQCOUNT=()
XEQMEMBER(MVS2)=(MAXIMUM=*,
CURRENT=283),
XEQMEMBER(MVS1)=(MAXIMUM=*,
CURRENT=280),
XEQMEMBER(MVS3)=(MAXIMUM=*,
CURRENT=179)
Alan Schwartz
ITO Global Service Operations and Engineering
Affiliated Computer Services, LLC, A Xerox Company
1500 Towerview Rd.
Eagan, MN 55121-1346
p. 612.266.3150
m. 651.274.5819
f. 612.266.3196
www.xerox.com/businessservices
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On
Behalf Of Staller, Allan
Sent: Friday, March 30, 2012 8:04 AM
To: [email protected]
Subject: Re: Trying to capture JES2 Job Log
Check the MSGLEVEL setting in JES2 (JOBCLASS(STC) or JOBDEF).
<snip>
I've been away for a while but ready to revisit this at it's a real
irritant. It shouldn't be this difficult.
I checked a task I can cycle as needed. When I view the stc via SDSF
all portions (except internal text) show msgclass of 7 which is what is
desired.
NP DDNAME StepName ProcStep DSID Owner C Dest
Rec-Cnt
JESJCLIN 1 *BYPASS* 7
2
JESMSGLG JES2 2 *BYPASS* 7
2
JESJCL JES2 3 *BYPASS* 7
34
JESYSMSG JES2 4 *BYPASS* 7
2
$INTTEXT JES2 5 *BYPASS* A
9
</snip>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
