I was not aware of z/XDC's capabilities. That's good to know. Thanks, Dave. Bill Fairchild
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of David Cole Sent: Sunday, October 30, 2011 8:04 PM To: [email protected] Subject: Re: Testing g RTM routine At 10/28/2011 11:43 AM, Bill Fairchild wrote: >After following the advice in all the other previous answers, sooner or >later you will still need to know how to test your SRB and its recovery >routine. You probably won't be able to instruction-step or trace >either very easily with TSOTEST or XDC. FWIW: z/XDC has *explicit* support for testing SRB code that is actually running within SRB environments. This support includes the ability to step through SRBs instruction by instruction, ... and includes the ability to debug locked code! Yes, there are some limitations, but they are less that what you might think, and within those limitations, z/XDC can be unexpectedly useful! Dave Cole REPLY TO: [email protected] ColeSoft Marketing WEB PAGE: http://www.xdc.com 736 Fox Hollow Road VOICE: 540-456-8536 Afton, VA 22920 FAX: 540-456-6658 ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
