Hi, In the IOCDS , I have mentioned device address as (300,196) and (1100,196). But the Storage engineer has formatted the devices starting from 2100 instead of 1100.
I think that should not be a problem. But I am not sure. Also , is there a power up sequence. Like should the DS8K be powered up before the Z10BC? Regards, Srinivas G -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Paolo Cacciari Sent: Friday, December 03, 2010 5:44 PM To: [email protected] Subject: Re: Z10 BC DS8700 Storage issue Srnivas, double check DS8700 Channel Paths and be sure they're ONLINE... If they are, check your IOCDS and verify that CHPs/CUs are assigned to your LPAR (if you are IPLing one...). Ciao. _________________________________________________________________________ Paolo Cacciari IBM Italia S.p.A. Business Continuity and Resiliency Services, IBM Global Services - South Region, EMEA IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 384.506.359,00 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS*** ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
