Can you tell me what video card you have and if you were able to
install 11.04 without any switches or how you were able to install
11.04 as I am having a problem even getting that to install.
Dell XPS 15z Nvidia 525M 2GB
Regards
Mark
On 06/05/2011 11:33 PM, Bilal Akhtar wrote:
On
Monday 06 June 2011 12:25 AM, Albert Vilella wrote:
Awesome! Is this working on L502X and
L501X models?
For my L502X I use these commands, and it has been working
perfectly since the last 2 months.
Turn nVidia card on: \_SB.PCI0.PEG0.PEGP._ON
Turn nVidia card off: \_SB.PCI0.PEG0.PEGP._OFF
I'm using Bumblebee, with the enablecard/disablecard scripts
enabled. Its working perfectly, the card is turned off by calling
\_SB.PCI0.PEG0.PEGP._OFF at bootup, and when I run optirun,
\_SB.PCI0.PEG0.PEGP._ON is passed, the program starts up, and
after the program is terminated, the card is switched off again.
Thanks to all who were involved in this effort, because of which
my Ubuntu is now able to use the nVidia card as in Windows, with
proper power saving as well :)
Bilal Akhtar
On Sun, Jun 5, 2011 at 7:29 PM, James<[email protected]>
wrote:
For my L702X with an NVIDIA 550M, I used
the ACPI methods from Jos
Hickson's dellL702X.sh script.
Methods:
Turn on NVIDIA: \_SB.PCI0.PEG0.PEGP._PS0
Turn off NVIDIA: \_SB.PCI0.PEG0.PEGP._PS3
The dellL702X.sh script:
https://lists.launchpad.net/hybrid-graphics-linux/msg00663.html
James
On Sun, Jun 5, 2011 at 11:44 AM, Albert
Vilella<[email protected]> wrote:
As far as I know, we haven't been able
to decode the on/off switch for
the modern XPS models, and it's a pity because we have
dozens of users
in the launchpad team, for the L501X, L502X and L702X
models. The
DSDTs are here:
https://bugs.launchpad.net/lpbugreporter/+bug/752542
If there is any ACPI expert in the list, please have a look
at those,
see if we can find the on/off graphics switch.
On Sun, Jun 5, 2011 at 7:51 AM,
James<[email protected]> wrote:
Hello all,
I'm recently got a Dell L702X and so far it's been a
rather nice
machine aside from the Optimus hurdle. So far, it works
just fine
with the Intel chip, actually compiz capable but, I've got
a 550M next
to it. So far, I've managed to use the acpi_call module
(http://github.com/mkottman/acpi_call) to turn on and off
the NVIDIA
chip and I can confirm this by the amount of power being
drawn from
the battery. My question is, with the NVIDIA chip
enabled, is there
anyway to have the NVIDIA proprietary driver take over?
I've tried
this with and without the Intel VESA module but, with the
same result,
a black screen. The monitor does not turn off into a
standby state,
it simply just display no content. My guess would be that
everything
must go through the Intel chip before it can hit the
NVIDIA and that
the NVIDIA chip has to send everything back to the Intel
chip due to
the monitor being connected to the Intel chip. Ideally
I'd like to
just have the NVIDIA chip always on with the NVIDIA driver
handling
things but, I suppose if it was this easy, there would be
no need for
the bumblebee project. Is something like this even
currently doable?
Thanks,
James
_______________________________________________
Mailing list: https://launchpad.net/~hybrid-graphics-linux
Post to : [email protected]
Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~hybrid-graphics-linux
Post to : [email protected]
Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~hybrid-graphics-linux
Post to : [email protected]
Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
More help : https://help.launchpad.net/ListHelp
--
Regards,
Mark McIntosh
Snake Hill
Practical Technology Solutions
c. 410.493.1780
o. 443.927.2176
f. 443.927.2176
[email protected]
|
