Hi Jose, If you have a single-row panorama like this, you should be able to use the default "Hugin's cpfind" which will only look for control points between successive images in the selected list (0 and 1, 1 and 2, ..., N-1 and N). The "cpfind prealigned" will only look between images which already overlap in the panorama sphere, and there's the fully general one (cpfind multirow/stacked) that looks between all image pairs. (unless this is all changed from 2023.0 to 2024.0).
-- Erik On Tue, Apr 15, 2025 at 1:55 PM jose1711 <[email protected]> wrote: > Thank you, that worked! So in cases like these I guess I am supposed to > make sure Hugin only found CPs between adjacent images. > > Dátum: utorok 15. apríla 2025, čas: 17:39:49 UTC+2, odosielateľ: dkloi > >> CPFind is finding some erroneous matches between the 2nd and 4th images. >> If you remove them it should stitch OK. >> >> On Tuesday, 15 April 2025 at 13:33:59 UTC+1 jose1711 wrote: >> >>> Hello, >>> >>> struggling to stitch a panorama of 6 images of an indoor foodcourt, >>> using Hugin 2024.0.1, Hugin's CPFind to find control points. I've tried >>> many things but for some reason I cannot get a satisfactory result. >>> >>> I've also tried the online stitcher at https://sisik.eu/pano and it was >>> able to stitch them without issues. >>> >>> Can someone please help? >>> >>> Source images: >>> >>> https://drive.google.com/file/d/1_5e810AP6N8RYw9OLnYbKpxCxXoM9ir1/view?usp=sharing >>> >>> Thanks! >>> >> -- > A list of frequently asked questions is available at: > http://wiki.panotools.org/Hugin_FAQ > --- > You received this message because you are subscribed to the Google Groups > "hugin and other free panoramic software" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/d/msgid/hugin-ptx/c20081f5-d8f4-40ce-b024-ce59a60967bcn%40googlegroups.com > <https://groups.google.com/d/msgid/hugin-ptx/c20081f5-d8f4-40ce-b024-ce59a60967bcn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/hugin-ptx/CADkOXhLCPjFE4vrW2Pvp7MhhavuP4AGRPjYROtD0ajr6pbORYQ%40mail.gmail.com.
