Hi Matt, yes Hugin will let you use a different angle of view for each shot. Then when it aligns the images it will calculate this angle of view for you.
So in the Photos tab, right-click on either of the photos and create a 'new lens' (this tells Hugin not to link lens settings). Then, also in the Photos tab, Optimise > Positions and View, and re-optimise the alignment. Fell free to share your photos or results. -- Bruno On Tue, 8 Apr 2025, 07:46 Matt Rosing wrote: > I'm new with using hugin. I'm using 2024.0.1 with the simple interface. I > have two photos taken with a 85mm prime lens. Both photos were of mostly > the same thing. In the foreground is a bunch of icicles hanging off a roof > and in the rear a hundred yards away is a grove of aspen trees with no > leaves. This seems like a really hard problem because there's nothing in > focus in both images. > > Using the simple interface I loaded the two photos, aligned them using the > default and created the panorama with the focus stacked option. The > alignment is partly correct in that it figured out that the two images are > slightly rotated and shifted with respect to each other but what it didn't > figure out is that this lens creates a bit of focus breathing, or the focal > length of the lens changes a bit based on focal distance. So, the image > focused on the foreground has a slightly higher focal length. The result is > that the background is in focus and some of the icicles in the center are > okay but the ones far from the center are pulled from the far image and > just blurry. I changed the interface to advanced and, the best I can tell > is that there are no control points. I don't know. I tried the advanced > option from the start and got control points but the result was no better. > I read the tutorial referenced in the help section under focus stacking by > Pat David and the result of the alignment was "After control points pruning > reference images has no control points" > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/hugin-ptx/CAJV99Zh6-%3D81WP53WRJ1RYSqXvU%3DpPP8MzthMBA%2BQGBg8txPGg%40mail.gmail.com.
