Hi dkloi Thank you for taking this on.
I should explain that the parallax is deliberate, as these two panoramas are taken from a 360 camera rotated at a distance of approximately 32mm from a centre point, by 90 degrees. As mentioned above, there are actually four panoramas, the 1st taken at 0 degrees rotation, 2nd 90 degrees, 3rd 180 degrees, 4th 270 degrees. A 3D panorama can then be viewed by showing the left and right eye the appropriate section of each panorama, it works well in a google cardboard style headset. Example of earlier work here at https://www.virtualmountains.co.uk/GorskiKotarV50/TourControlV50_8_7.html. Unfortunately some inaccuracy in the camera gyro and likely some flexibility in my equipment means that what may be vertical in one panorama is leaning a little in another, and the horizon is higher or lower from panorama to panorama. So what I'm trying to achieve is to find an easy way to correct the pitch and roll so that each panorama is better aligned. The pitch and roll of 0.4 and -0.6 found in your pto are typical of the corrections I have to apply. When I added the two panorama to Hugin, a yaw of -135 is applied to the first image, and 135 to the second. What are you doing to prevent this? After adding the control points, are you just selecting optimize to get the best pitch and roll values, or am I missing a stage? Is there an simple way to export the 2nd panorama alone, with the pitch and roll of 0.4 and -0.6 applied, or do you recommend manually applying these correction values in the "Move/Drag" tab? All the best Derek On Wednesday, 23 November 2022 at 19:16:29 UTC dkloi wrote: > Here's the Hugin project file. I've tried to align it as best as I can but > you have some noticeable parallax which prevents the two panoramas lining > up perfectly. > > On Tuesday, 22 November 2022 at 20:49:30 UTC DerekS wrote: > >> Sure. Here are two examples. >> >> I would be looking for an easy process to align image 2 with image 1. In >> reality there would also be images 3 and 4 that would also need to be >> aligned with image 1. >> >> Many thanks and kind regards >> >> Derek >> >> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/95aa0e01-4931-4505-9e02-6d864705c434n%40googlegroups.com.
