A lot depends on how much relative depth there is to the surface.  If there
is significant relative depth, then there will be parallax problems that
hugin has no good way of managing.  Otherwise, it should not be terribly
difficult.

I'm failing to see the point of computing the hypothetical component images
or their midpoints.  The hypothetical nodal point is put into effect by
parameters of the final projection.

The usual approach would be to take pictures directly toward the wall that
are however wide fits (from the 30 feet away you can get) and about 30%
overlapped one to the next, moving the camera sideways along the wall to
get all the photos.  You might want to also make a seperate project to
compute lens parameters, rather than needing to include lens parameter
optimization in the main project.

If you are pretty careful about always pointing straight on, there will be
very little yaw, pitch or roll.  The best work around to conflicts of yaw
vs Tx etc. is to first optimize with just the parameter that should
dominate, then reoptimize including other parameters (expert mode and
custom selection of parameters is easier than you might expect).  For the
project you describe, Tx should be the dominant parameter (it represents
moving the camera sideways without turning it).





On Thu, Sep 8, 2022 at 2:20 PM Alexander Drecun <[email protected]>
wrote:

> Hey all,
>
> This is a question partially about Hugin but also about how to shoot a
> specific type of site/location in order to produce a quality panorama. If
> any of you know of resources that provide solutions to this problem, then
> please send them along.
>
> In brief, I'm trying to photograph an entire exterior wall of a very large
> and long property somewhere in the area of 300 ft. The problem is, this
> property sits on a pretty narrow street with another walled property across
> from it, putting me no further than thirty feet from the wall. This means
> there's no way for me to shoot from a single nodal point that would produce
> a clean panorama with no stretching of pixels at the edges or anything like
> that. In fact, I'm not even sure I could shoot the entire property from a
> single point if I tried.
>
> So, I was wondering if anyone has experience with or thoughts on
> photographing something like this.
>
> My current plan for how to tackle this is:
>
> - posit a hypothetical nodal point some distance removed from the property
> that is based up on final panorama rendered from the perspective of, say, a
> full frame 50mm lens.
>
> - from this hypothetical nodal point, figure out how many component images
> I would need to make my final panorama.
>
> - then figure out where the midpoint of each component image is on the
> actual street I'll be photographing from.
>
> - make a panorama at each of these midpoints.
>
> - stitch those panoramas into the final panorama
>
> All that said, I'm relatively new to both Hugin and panoramas in general
> and so have no idea whether this will work. Does anyone have any thoughts
> or advice to offer?
>
> --
> A list of frequently asked questions is available at:
> http://wiki.panotools.org/Hugin_FAQ
> ---
> You received this message because you are subscribed to the Google Groups
> "hugin and other free panoramic software" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/hugin-ptx/d8c7a07c-4d5a-41e7-8acd-542265455131n%40googlegroups.com
> <https://groups.google.com/d/msgid/hugin-ptx/d8c7a07c-4d5a-41e7-8acd-542265455131n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/CALe0Q_keF5Qa9HQSjEWTWTREp8RGg%2B_1kCPDNU%3DkdOKesWw%2Bpg%40mail.gmail.com.

Reply via email to