I was able to finally get it to work well using manually entered control points in Expert mode. I found this tutorial https://hugin.sourceforge.io/tutorials/scans/en.shtml that helped a little but it seems that Hugin has moved on a lot since then. I was not able to find any reference to Mosaic mode in the Expert interface in my version - 2021.0.0.52df0f76c700. I would write up some notes on what I did but there was so much experimental clicking to get a decent image output that I doubt I could ever reproduce the result again. Initial attempts did not stitch all 7 images together.
On Tuesday, June 21, 2022 at 7:19:33 PM UTC+1 [email protected] wrote: > On Tue, Jun 21, 2022 at 1:27 PM 'John James' via hugin and other free > panoramic software <[email protected]> wrote: > >> I can only get 2 or 3 to stich together correctly. >> > > Some hint of what failure symptoms you had might help. > > A tutorial for stitching "mosaic" (rather than the usual "panorama") has > been linked to a few times recently, so look back in the recent mailing > list history. (What you need is definitely mosaic not panorama). > > You need expert mode to enable the most important feature for mosaic, > which is changing which parameters are set by optimize. A panorama > optimizes mainly by adjusting pitch and yaw. You don't want those adjusted > at all. The main mosaic parameter is "translation X". Other mosaic > projects also need Translation Y and sometimes Z. But for what you > described, you don't need Z and might not need Y (though enabling > translation Y won't hurt). > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/011fd4a7-7032-48df-8449-b99e5b32494cn%40googlegroups.com.
