I'm a Hugin and panotools newbie. I came across this thread while researching image alignment. Would this approach work to align multiple equirectangular images, or more specifically, I would be more interested in getting horizontal offsets between a particular image and the reference image. My use case is automatically aligning 360 panoramas that are taken on a periodic basis. The reason I'm mostly interested in determining the offset is because I can align the images in the pano viewer by mapping the pixel offsets to yaw offsets.
Thanks, Alek On Monday, June 25, 2018 at 3:01:23 PM UTC-4 [email protected] wrote: > I recently needed to convert a series of webcam images to video, but the > camera wobbles around in the wind, so I needed to stabilise them first. > Also the camera is at a funny angle, and I wanted to use Hugin to level > the scene. > > The solution is to use align_image_stack to align the photos to an > anchor image, but align_image_stack can't cope with thousands of photos, > so it needs some help. > > The attached perl script uses a Hugin project file as a template to > fix lens distortion, straighten, and define a crop for the output. It > also uses the photo defined in the project as a reference, so all the > images in the sequence are fitted to this image. > > Here's a short clip showing the result is pretty solid (except during > the bit where the entire scene is covered in fog): > https://youtu.be/N80QkvfnjhQ > > -- > Bruno > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/73422112-486e-4346-9e47-1a3758899890n%40googlegroups.com.
