Hello! I need to make hi-MP scans of flat herbarium sheets (~ A3 size) without touching them, and i've made a rig with a still camera with 50 mm zeiss lens and rails with a platform under it for this purpose. So herbaium sheet can move across it and i make 3 shots of it and then stitch them. Non-linearity of movement is less than 1 mm. In my case i can't bye a 35000$ scanner for one-shot scanning.
I tried to use Kolor Autopano, Hugin and Image Composite Editor (ICE) and a got good results only in ICE, but sometimes (1-2% of scans) it can make a 0.2-0.5 mm "step" in several places in resulting image. Usually it makes steps in long lone stalks. I'm wondering - a hugin is so complex and tunable software, but why i couldn't get any good results from it. Of course i need fully automated batch processing. Is it possible and if it is what settings i should check? I made more then 10000 stitches in ICE and almost everytime the quality was good, but i want to increase it if it's possible. Here is a example of 3 images made on old rails with not so good linearity of movement, but it's below 2mm i think: : https://dropmefiles.com/WSD5t Thanks in advance for your reply. -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/56296b24-6782-4b45-9189-3321d90c0653%40googlegroups.com.
