On Tue, Oct 08, 2019 at 03:48:38PM -0700, David Wilson wrote:
> Hi all,
>
> Does anyone know whether there's a configuration setting I can use somewhere
> that will cause NetworkManager to automatically (re)connect wifi upon boot or
> after waking from suspend? My current wifi connections all have autoconnect
> turned on, as does the wifi device itself. Is it perhaps a power management
> or network configuration setting that I'm looking for?
>
> Thanks!
>
> David
It works for me after suspend (I did not try reboot) after configuring
a new Wifi connection via nm-connection-editor. Once I entered the
password in nm-connection-editor, it automatically (re)connects.
If it helps, I attach the output of
nmcli connection show 299e800a-4737-4b78-b018-0012a35f942e
Perhaps /var/log/messages tells us something? Perhaps one needs to
configure something for NM to print more debug info??
Regards,
Florian
connection.id: Funknetzwerkverbindung 1
connection.uuid: 299e800a-4737-4b78-b018-0012a35f942e
connection.stable-id: --
connection.type: 802-11-wireless
connection.interface-name: wlp0s6f1u4
connection.autoconnect: ja
connection.autoconnect-priority: 0
connection.autoconnect-retries: -1 (default)
connection.auth-retries: -1
connection.timestamp: 1570597034
connection.read-only: nein
connection.permissions: --
connection.zone: --
connection.master: --
connection.slave-type: --
connection.autoconnect-slaves: -1 (default)
connection.secondaries: --
connection.gateway-ping-timeout: 0
connection.metered: unbekannt
connection.lldp: default
802-11-wireless.ssid: Lolo
802-11-wireless.mode: infrastructure
802-11-wireless.band: --
802-11-wireless.channel: 0
802-11-wireless.bssid: --
802-11-wireless.rate: 0
802-11-wireless.tx-power: 0
802-11-wireless.mac-address: 00:C0:CA:82:ED:1D
802-11-wireless.cloned-mac-address: --
802-11-wireless.generate-mac-address-mask:--
802-11-wireless.mac-address-blacklist: --
802-11-wireless.mac-address-randomization:default
802-11-wireless.mtu: auto
802-11-wireless.seen-bssids: 38:10:D5:63:36:33
802-11-wireless.hidden: nein
802-11-wireless.powersave: 0 (default)
802-11-wireless-security.key-mgmt: wpa-psk
802-11-wireless-security.wep-tx-keyidx: 0
802-11-wireless-security.auth-alg: --
802-11-wireless-security.proto: --
802-11-wireless-security.pairwise: --
802-11-wireless-security.group: --
802-11-wireless-security.pmf: 0 (default)
802-11-wireless-security.leap-username: --
802-11-wireless-security.wep-key0: <hidden>
802-11-wireless-security.wep-key1: <hidden>
802-11-wireless-security.wep-key2: <hidden>
802-11-wireless-security.wep-key3: <hidden>
802-11-wireless-security.wep-key-flags: 0 (keine)
802-11-wireless-security.wep-key-type: unknown
802-11-wireless-security.psk: <hidden>
802-11-wireless-security.psk-flags: 0 (keine)
802-11-wireless-security.leap-password: <hidden>
802-11-wireless-security.leap-password-flags:0 (keine)
802-11-wireless-security.wps-method: 0 (default)
ipv4.method: auto
ipv4.dns: --
ipv4.dns-search: --
ipv4.dns-options: ""
ipv4.dns-priority: 0
ipv4.addresses: --
ipv4.gateway: --
ipv4.routes: --
ipv4.route-metric: -1
ipv4.route-table: 0 (unspec)
ipv4.ignore-auto-routes: nein
ipv4.ignore-auto-dns: nein
ipv4.dhcp-client-id: --
ipv4.dhcp-timeout: 0 (default)
ipv4.dhcp-send-hostname: ja
ipv4.dhcp-hostname: --
ipv4.dhcp-fqdn: --
ipv4.never-default: nein
ipv4.may-fail: ja
ipv4.dad-timeout: -1 (default)
ipv6.method: auto
ipv6.dns: --
ipv6.dns-search: --
ipv6.dns-options: ""
ipv6.dns-priority: 0
ipv6.addresses: --
ipv6.gateway: --
ipv6.routes: --
ipv6.route-metric: -1
ipv6.route-table: 0 (unspec)
ipv6.ignore-auto-routes: nein
ipv6.ignore-auto-dns: nein
ipv6.never-default: nein
ipv6.may-fail: ja
ipv6.ip6-privacy: 0 (deaktiviert)
ipv6.addr-gen-mode: stable-privacy
ipv6.dhcp-send-hostname: ja
ipv6.dhcp-hostname: --
ipv6.token: --
proxy.method: none
proxy.browser-only: nein
proxy.pac-url: --
proxy.pac-script: --
