unsubscribe 2015-07-15 9:17 GMT-03:00 mlist <[email protected]>:
> We take a tcpdump. Following the tcp traffic we can see each step. > Reproducing manually the mail was sent. Probably HAProxy SMTP communication > has an error on the final stage <CRLF>.<CRLF> as of that all goes right. > > Follows manual communication with mmail server reproducing tpcdump smto > command seguence. > EHLO smtp1 > 250-MAIL1 Hello [192.168.1.x] > 250-SIZE 10485760 > 250-PIPELINING > 250-DSN > 250-ENHANCEDSTATUSCODES > 250-STARTTLS > 250-AUTH > 250-8BITMIME > 250-XEXCH50 > 250 XSHADOW > MAIL FROM:<loadbha1@domain> > 250 2.1.0 Sender OK > RCPT TO:<alerts@domain> > 250 2.1.5 Recipient OK > DATA > 354 Start mail input; end with <CRLF>.<CRLF> > From: loadbha1@domain > To: alerts@domain > Date: Wed, 15 Jul 2015 12:50:48 +0200 (CEST) > Subject: [HAproxy Alert] Server <backend>/webhost1 is DOWN, reason: Layer4 > timeout, check duration: 5002ms. 1 active and 0 backup servers left. 0 > sessions active, 0 requeued, 0 remaining in queue > > Server <backend>/webhost1 is DOWN, reason: Layer4 timeout, check duration: > 5002ms. 1 active and 0 backup servers left. 0 sessions active, 0 requeued, > 0 remaining in queue > . > 250 2.6.0 <7c4f8f74-8d6b-446e-a504-e7a45fc58baf@MAIL> [InternalId=293812] > Queued mail for delivery > > Entering manually all these commands we correctly receive the email. > > > Dr. Roberto Cazzato > Divisione ICT e Sicurezza > Senior IT Designer > gsm +39 348 22 00 850 > > A.P. SYSTEMS s.r.l. > 20013 Magenta (Milano) > Via Milano 89/91 (ang.Via Cimarosa) Italia - www.apsystems.it > tel. +39 02 97226.1 - fax 02 97226.339 > > > -----Original Message----- > From: Baptiste [mailto:[email protected]] > Sent: mercoledì 15 luglio 2015 12.01 > To: mlist > Cc: [email protected] > Subject: Re: Mailer does not work > > On Wed, Jul 15, 2015 at 9:48 AM, mlist <[email protected]> wrote: > > We compiled from source haproxy-1.6-dev2.tar.gz. New Mailers mechanism > does > > not seems to work, we configured as on manual: > > > > > > > > mailers apsmailer1 > > > > mailer smtp1 <mailserver ip>:10025 > > > > > > > > … > > > > … > > > > > > > > backend somebackend_https > > > > mode http > > > > balance roundrobin > > > > … > > > > email-alert mailers apsmailer1 > > > > email-alert from <from mail> > > > > email-alert to <to mail> > > > > email-alert level info > > > > … > > > > > > > > We see in haproxy.log server status change: > > > > Jul 15 09:42:00 localhost.localdomain haproxy[3342]: Server …/<server1> > is > > UP, reason: Layer4 check passed, check duration: 0ms. 2 active and 0 > backup > > servers online. 0 sessions requeued, 0 total in queue. > > > > Jul 15 09:42:00 localhost.localdomain haproxy[3342]: Server …/<server1> > is > > UP, reason: Layer6 check passed, check duration: 1ms. 2 active and 0 > backup > > servers online. 0 sessions requeued, 0 total in queue. > > > > > > > > But no mail alerts are sent, no error or warning logged about sending > mail. > > > > > > > > haproxy -f /etc/haproxy/haproxy.cfg –c > > > > does not return any error. All seems to be right, but mail alerts are not > > sent. > > > > > > Roberto > > > > Hi Roberto, > > Could you please take a tcpdump on port 10025 and confirm HAProxy > tries to get connected to the SMTP server? > > Baptiste > > -- > Il messaggio e' stato analizzato alla ricerca di virus o > contenuti pericolosi da MailScanner, ed e' > risultato non infetto. > > -- Atte Jorge Severino Numero movil Personal: 08-7775834
