Mas menos de esta forma. Así es como se instala
NAME
SquidAnalyzer - Squid access log report generation tool
REQUIREMENT
Nothing is required than a modern perl version 5.8 or higher. Graphics
are based on the Flotr2 Javascript library so they are drawn at your
browser side without extra installation required.
INSTALLATION
Generic install
If you want the package to be intalled into the Perl distribution just
do the following:
perl Makefile.PL
make
make install
Follow the instruction given at the end of install. With this default
install everything configurable will be installed under
/etc/squidanalyzer. The Perl library SquidAnalyzer.pm will be installed
under your site_perl directory and the squid-analyzer Perl script will
be copied under /usr/local/bin.
The default output directory for html reports will be
/var/www/squidanalyzer/.
On FreeBSD, if make install is freezing and you have the following
messages:
FreeBSD: Registering installation in the package database
FreeBSD: Cannot determine short module description
FreeBSD: Cannot determine module description
please proceed as follow:
perl Makefile.PL INSTALLDIRS=site
make
make install
as the issue is related to an install into the default Perl vendor
installdirs it will then use Perl site installdirs.
Custom install
You can create your fully customized SquidAnalyzer installation by
using
the Makefile.PL Perl script. Here is a sample:
perl Makefile.PL \
LOGFILE=/var/log/squid3/access.log \
BINDIR=/usr/bin \
CONFDIR=/etc \
HTMLDIR=/var/www/squidreport \
BASEURL=/squidreport \
MANDIR=/usr/man/man3 \
DOCDIR=/usr/share/doc/squidanalyzer
If you want to build a distro package, there are two other options that
you may use. The QUIET option is to tell to Makefile.PL to not show the
default post install README. The DESTDIR is to create and install all
files in a package build base directory. For example for Fedora RPM,
thing may look like that:
# Make Perl and SendmailAnalyzer distrib files
%{__perl} Makefile.PL \
INSTALLDIRS=vendor \
QUIET=1 \
LOGFILE=/var/log/squid/access.log \
BINDIR=%{_bindir} \
CONFDIR=%{_sysconfdir} \
BASEDIR=%{_localstatedir}/lib/%{uname} \
HTMLDIR=%{webdir} \
MANDIR=%{_mandir}/man3 \
DOCDIR=%{_docdir}/%{uname}-%{version} \
DESTDIR=%{buildroot} < /dev/null
See spec file in packaging/RPM for full RPM build script.
Local install
You can also have a custom installation. Just copy the SquidAnalyzer.pm
and the squid-analyzer perl script into a directory, copy and
modify the
configuration file and run the script from here with the -c option.
Then copy files sorttable.js, squidanalyzer.css and
logo-squidanalyzer.png into the output directory.
Post installation
1. Modify your httpd.conf to allow access to HTML output like follow:
Alias /squidreport /var/www/squidanalyzer
<Directory /var/www/squidanalyzer>
Options -Indexes FollowSymLinks MultiViews
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Directory>
2. If necessary, give additional host access to SquidAnalyzer in
httpd.conf. Restart and ensure that httpd is running.
3. Browse to http://my.host.dom/squidreport/ to ensure that things are
working properly.
4. Setup a cronjob to run squid-analyzer daily or more often:
# SquidAnalyzer log reporting daily
0 2 * * * /usr/local/bin/squid-analyzer > /dev/null 2>&1
or run it manually. For more information, see README file.
You can use network name instead of network ip addresses by using the
network-aliases file. Also if you don't have authentication enable and
want to replace client ip addresses by some know user or computer you
can use the user-aliases file to do so.
See the file squidanalyzer.conf to customized your output
statistics and
match your network and file system configuration.
USAGE
SquidAnalyzer can be run manually or by cron job using the
squid-analyzer Perl script. Here are authorized usage:
Usage: squid-analyzer [ -c squidanalyzer.conf ] [-l logfile]
-c | --configfile filename : path to the SquidAnalyzer
configuration file.
By default:
/etc/squidanalyzer.conf
-b | --build_date date : set the day to be rebuilt,
format: yyyy-mm-dd,
yyyy-mm or yyyy. Used with -r
or --rebuild.
-d | --debug : show debug informations.
-h | --help : show this message and exit.
-l | --logfile filename : path to the Squid logfile to
parse.
By default:
/var/log/squid/access.log
-p | --preserve number : used to set the statistic
obsolescence in
number of month. Older stats
will be removed.
-r | --rebuild : use this option to rebuild all
html and graphs
output from all data files.
-v | version : show version and exit.
--no-year-stat : disable years statistics,
reports will
start from month level only.
There is special options like --rebuild that force SquidAnalyzer to
rebuild all HTML reports, useful after an new feature or a bug fix. If
you want to limit the rebuild to a single day, a single month or year,
you can use the --build_date option by specifying the date part to
rebuild, format: yyyy-mm-dd, yyyy-mm or yyyy.
The --preserve option should be used if you want to rotate your
statistics and data. The value is the number of months to keep, older
reports and data will be removed from the filesystem. Useful to
preserve
space, for example:
squid-analyzer -p 6 -c /etc/squidanalyzer/squidanalyzer.conf
will only preserve six month of statistics from the last run of
squidanalyzer.
CONFIGURATION
See README file.
AUTHOR
Gilles DAROLD <gil...@darold.net>
COPYRIGHT
Copyright (c) 2001-2016 Gilles DAROLD
This package is free software and published under the GPL v3 or above
license.
--
Lic. Victor Luis Brizuela Peña
Administrador de Red
AZUMAT, Sucursal Granma
Móvil: (+53) 53789796
Telf: (+53)(23) 532102
"Sé siempre humilde con los demás,
porque no sabes de quien necesitarás mañana"
Gott segnet dich!!
"When there is a will there is a way"
_______________________________________________
Gutl-l mailing list -- gutl-l@listas.jovenclub.cu
To unsubscribe send an email to gutl-l-le...@listas.jovenclub.cu
