Yes that was it! I added "(native-inputs (list perl python))" to my package
definition.
$ guix build -L ~/dotfiles/ rust-rustscan # A. Now builds again!
/gnu/store/4bldy27x1f2mzjqg5jd176nrawl98y1y-rust-rustscan-2.1.1
$ guix package -L ~/dotfiles/ -m ~/dotfiles/guix/packages/manifest.scm #
B. Now also builds!
...
The following derivation will be built:
/gnu/store/xll763hpl7mvdkxd3kf8f98pygarzh41-profile.drv
...
guix package --list-profiles # C. does NOT show the custom profile just
built
/home/twashing/.config/guix/current
/home/twashing/.guix-profile
cat /gnu/store/xll763hpl7mvdkxd3kf8f98pygarzh41-profile.drv # D. DOES
show the new profile in /gnu/store
Derive([("out","/gnu/store/sqaz4ff2nshfizfh8ymbzllia6lsgnfv-profile","","")],
...
("out","/gnu/store/sqaz4ff2nshfizfh8ymbzllia6lsgnfv-profile"),("preferLocalBuild","1")])
i. Using a direct "guix build" gives you a directory in "/gnu/store". And
you can add that bin to your PATH.
ii. But for "/gnu/store/*-profile/", would you just loop over those profile
directories, and run each "/gnu/store/*-profile/etc/profile"?
I'm attaching the full package definition to this email.
Thanks a lot!
Tim
On Mon, 22 May 2023 at 14:18, Kaelyn <kaelyn.al...@protonmail.com> wrote:
> Hi Tim,
>
> ------- Original Message -------
> On Sunday, May 21st, 2023 at 8:35 PM, Timothy Washington <
> twash...@gmail.com> wrote:
>
> Hey Simon, sure thing.
>
> I've attached "*shaka.scm*" here. I was able to build it separately (see
> "*Howto
> supply cargo-build-system dependency to guix package definition*
> <https://lists.gnu.org/archive/html/help-guix/2023-05/msg00009.html>").
> That was using these commands.
>
> guix import crate -r rustscan
> guix build -L ~/dotfiles/ rust-rustscan-2
>
>
> *A.* I re-ran "guix build". Note that I definitely installed (and
> sourced) perl and python3.
>
>
> You will need to add perl and python to the native-inputs field of your
> rust-rustscan-2 package for it to see those two programs. When packages are
> built, the building happens in an isolated environment distinct from your
> shell environment, so packages you install through "guix package -i" or
> "guix install" won't be seen in the package's build environment.
> https://guix.gnu.org/en/manual/devel/en/html_node/package-Reference.html#package-Reference
> describes the various fields including three different types of inputs, but
> my rule of thumb is that if the package depends on and is linking to a
> library then the library package is an input, and if the dependency is a
> program that needs to be run as part of the build (such as the rustscan
> package trying to run perl and python3) it should be a native-input. HTH!
>
> Cheers,
> Kaelyn
>
> P.S. I've not packaged any rust code, but from what I recall rust packages
> that use cargo-build-system are a bit anomalous in that they have to
> declare the rust packages they depend on in a #:cargo-inputs argument
> instead of the normal inputs package field.
>
> And updated my system with "guix pull && guix package -u". But now it's
> failing with the below.
>
> guix build -L ~/dotfiles/ rust-rustscan
>
> substitute: updating substitutes from 'https://ci.guix.gnu.org'...
> 0.0%guix substitute: warning: ci.guix.gnu.org: connection failed:
> Connection timed out
> substitute:
> substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'...
> 100.0%
> The following derivation will be built:
> /gnu/store/x695f07186dwqpw2jk48b62p2s18f5ry-rust-rustscan-2.1.1.drv
> ...
> phase `patch-usr-bin-file' succeeded after 0.0 seconds
> starting phase `patch-source-shebangs'
> patch-shebang: ./fixtures/.rustscan_scripts/test_script.pl: warning: no
> binary for interpreter `perl' found in $PATH
> patch-shebang: ./fixtures/.rustscan_scripts/test_script.py: warning: no
> binary for interpreter `python3' found in $PATH
> patch-shebang: ./fixtures/.rustscan_scripts/test_script.sh: changing
> `/bin/bash' to
> `/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash'
> phase `patch-source-shebangs' succeeded after 0.0 seconds
> starting phase `configure'
> Unpacking rust-ansi-term
> ...
> error: failed to run custom build command for `ring v0.16.20`
>
> Caused by:
> process didn't exit successfully:
> `/tmp/guix-build-rust-rustscan-2.1.1.drv-0/rustscan-2.1.1/target/release/build/ring-9bf05aa562ef9c86/build-script-build`
> (exit status: 101)
> --- stderr
> running "perl" "crypto/fipsmodule/aes/asm/aesni-x86_64.pl" "elf"
> "/tmp/guix-build-rust-rustscan-2.1.1.drv-0/rustscan-2.1.1/target/release/build/ring-297f46c71994a65c/out/aesni-x86_64-elf.S"
> thread 'main' panicked at 'failed to execute ["perl"
> "crypto/fipsmodule/aes/asm/aesni-x86_64.pl" "elf"
> "/tmp/guix-build-rust-rustscan-2.1.1.drv-0/rustscan-2.1.1/target/release/build/ring-297f46c71994a65c/out/aesni-x86_64-elf.S"]:
> No such file or directory (os error 2)',
> /tmp/guix-build-rust-rustscan-2.1.1.drv-0/rustscan-2.1.1/guix-vendor/rust-ring-0.16.20.tar.xz/build.rs:653
> :9
> note: run with `RUST_BACKTRACE=1` environment variable to display a
> backtrace
> warning: build failed, waiting for other jobs to finish...
> error: in phase 'build': uncaught exception:
> %exception #<&invoke-error program: "cargo" arguments: ("build"
> "--release") exit-status: 101 term-signal: #f stop-signal: #f>
> phase `build' failed after 12.2 seconds
> command "cargo" "build" "--release" failed with status 101
> builder for
> `/gnu/store/x695f07186dwqpw2jk48b62p2s18f5ry-rust-rustscan-2.1.1.drv'
> failed with exit code 1
> build of
> /gnu/store/x695f07186dwqpw2jk48b62p2s18f5ry-rust-rustscan-2.1.1.drv failed
> View build log at
> '/var/log/guix/drvs/x6/95f07186dwqpw2jk48b62p2s18f5ry-rust-rustscan-2.1.1.drv.gz'.
> guix build: error: build of
> `/gnu/store/x695f07186dwqpw2jk48b62p2s18f5ry-rust-rustscan-2.1.1.drv' failed
>
> *B.* The idea is to include that package as part of a larger profile that
> I can add to my base user profile. That's using the below. rust-rustscan
> is defined in "*guix/packages/shaka.scm*".
> And I get an error gain, when calling guix package
>
> guix package -L ~/dotfiles/ -m ~/dotfiles/guix/packages/manifest.scm
> The following packages will be installed:
> emacs 28.2
> gcc-toolchain 12.3.0
> git 2.40.1
> make 4.3
> rust-rustscan 2.1.1
> tree 2.1.0
> ungoogled-chromium 112.0.5615.165-1
> vim 9.0.1384
>
> substitute: updating substitutes from 'https://ci.guix.gnu.org'...
> 0.0%guix substitute: warning: ci.guix.gnu.org: connection failed:
> Connection timed out
> substitute:
> The following derivations will be built:
> /gnu/store/v5f24ky0nw76yy24jx1ihggs6yffnvvb-profile.drv
> /gnu/store/x695f07186dwqpw2jk48b62p2s18f5ry-rust-rustscan-2.1.1.drv
>
> ...
> cannot build derivation
> `/gnu/store/v5f24ky0nw76yy24jx1ihggs6yffnvvb-profile.drv': 1 dependencies
> couldn't be built
> guix package: error: build of
> `/gnu/store/v5f24ky0nw76yy24jx1ihggs6yffnvvb-profile.drv' failed
>
>
> Thanks
> Tim
>
>
> On Sun, 21 May 2023 at 12:46, Simon Tournier <zimon.touto...@gmail.com>
> wrote:
>
>> Hi,
>>
>> Please keep CC guix-devel.
>>
>> On Sun, 21 May 2023 at 04:44, Timothy Washington <twash...@gmail.com>
>> wrote:
>>
>> > $ cat guix/packages/manifest.scm
>> > (define-module (guix packages manifest))
>> > (use-modules (gnu packages))
>>
>> Well, I am not sure these two lines are required.
>>
>> > building
>> /gnu/store/x695f07186dwqpw2jk48b62p2s18f5ry-rust-rustscan-2.1.1.drv...
>> > \ 'build' phasebuilder for
>> `/gnu/store/x695f07186dwqpw2jk48b62p2s18f5ry-rust-rustscan-2.1.1.drv'
>> failed with exit code 1
>>
>> It means your custom package rust-rustscan does not build.
>>
>> Could you share your local file: ./guix/packages/shaka.scm containing
>> the definition of this custom package?
>>
>>
>> Cheers,
>> simon
>>
>
>
;; (define-module (guix packages manifest))
;; (use-modules (gnu packages))
;; (specifications->manifest '("gcc-toolchain" "make" "git" "emacs" "vim" "tree" "ungoogled-chromium"))
(specifications->manifest '("gcc-toolchain" "make" "git" "emacs" "vim" "tree" "ungoogled-chromium" "rust-rustscan"))
(define-module (guix packages rustscan)
#:use-module (guix packages)
#:use-module (guix download)
#:use-module (guix git-download)
#:use-module (guix build-system cargo)
#:use-module (guix gexp)
#:use-module (gnu packages crates-graphics)
#:use-module (gnu packages crates-io)
#:use-module (gnu packages perl)
#:use-module (gnu packages python)
#:use-module ((guix licenses) #:prefix license:))
(define-public rust-text-placeholder-0.4
(package
(name "rust-text-placeholder")
(version "0.4.1")
(source (origin
(method url-fetch)
(uri (crate-uri "text_placeholder" version))
(file-name (string-append name "-" version ".tar.gz"))
(sha256
(base32
"0q0iq60dflczvyfp3m4wn3w358yyxmcljmzdb9b5favwnb2c8qcn"))))
(build-system cargo-build-system)
(arguments
`(#:skip-build? #t
#:cargo-inputs (("rust-serde" ,rust-serde-1)
("rust-serde-json" ,rust-serde-json-1))))
(home-page "https://github.com/bernardoamc/text-placeholder";)
(synopsis "A flexible text template engine")
(description "This package provides a flexible text template engine")
(license (list license:expat license:asl2.0))))
(define-public rust-rlimit-0.8
(package
(name "rust-rlimit")
(version "0.8.3")
(source (origin
(method url-fetch)
(uri (crate-uri "rlimit" version))
(file-name (string-append name "-" version ".tar.gz"))
(sha256
(base32
"18vsz3fdj4s8yjp96wwq7wvrlc3vzzsqki8mfpha9m5zr0g8l9zp"))))
(build-system cargo-build-system)
(arguments
`(#:skip-build? #t
#:cargo-inputs (("rust-libc" ,rust-libc-0.2))))
(home-page "https://github.com/Nugine/rlimit/";)
(synopsis "Resource limits")
(description "Resource limits")
(license license:expat)))
(define-public rust-gcd-2
(package
(name "rust-gcd")
(version "2.3.0")
(source (origin
(method url-fetch)
(uri (crate-uri "gcd" version))
(file-name (string-append name "-" version ".tar.gz"))
(sha256
(base32
"06l4fib4dh4m6gazdrzzzinhvcpcfh05r4i4gzscl03vnjhqnx8x"))))
(build-system cargo-build-system)
(arguments
`(#:skip-build? #t))
(home-page "https://github.com/frewsxcv/rust-gcd";)
(synopsis "Calculate the greatest common divisor")
(description "Calculate the greatest common divisor")
(license (list license:expat license:asl2.0))))
(define-public rust-colorful-0.2
(package
(name "rust-colorful")
(version "0.2.2")
(source (origin
(method url-fetch)
(uri (crate-uri "colorful" version))
(file-name (string-append name "-" version ".tar.gz"))
(sha256
(base32
"1kj7vb4glvwcp75ambq2npf3dv1vjq4zkz12j8ypyzasaii0bbwp"))))
(build-system cargo-build-system)
(arguments
`(#:skip-build? #t))
(home-page "https://github.com/mellite/colorful";)
(synopsis "Make your terminal output colorful")
(description "Make your terminal output colorful")
(license license:expat)))
(define-public rust-cidr-utils-0.5
(package
(name "rust-cidr-utils")
(version "0.5.10")
(source (origin
(method url-fetch)
(uri (crate-uri "cidr-utils" version))
(file-name (string-append name "-" version ".tar.gz"))
(sha256
(base32
"0750jbxvdbyyxcqnzsw438158r9drs2g077ymx9r9lv193q3dypx"))))
(build-system cargo-build-system)
(arguments
`(#:skip-build? #t
#:cargo-inputs (("rust-debug-helper" ,rust-debug-helper-0.3)
("rust-num-bigint" ,rust-num-bigint-0.4)
("rust-num-traits" ,rust-num-traits-0.2)
("rust-once-cell" ,rust-once-cell-1)
("rust-regex" ,rust-regex-1)
("rust-serde" ,rust-serde-1))))
(home-page "https://magiclen.org/cidr-utils";)
(synopsis
"This crate provides data structures and functions to deal with IPv4 CIDRs and IPv6 CIDRs.")
(description
"This crate provides data structures and functions to deal with IPv4 CIDRs and
IPv6 CIDRs.")
(license license:expat)))
(define-public rust-rustscan-2
(package
(name "rust-rustscan")
(version "2.1.1")
(source (origin
(method url-fetch)
(uri (crate-uri "rustscan" version))
(file-name (string-append name "-" version ".tar.gz"))
(sha256
(base32
"1xdxzp4dfa8dcc6srz5apbfxkcm1a1w5d4k7wym4x0ql5kibfb4b"))))
(build-system cargo-build-system)
(arguments
`(#:tests? #f
#:cargo-inputs (("rust-ansi-term" ,rust-ansi-term-0.12)
("rust-anyhow" ,rust-anyhow-1)
("rust-async-std" ,rust-async-std-1)
("rust-cidr-utils" ,rust-cidr-utils-0.5)
("rust-colored" ,rust-colored-2)
("rust-colorful" ,rust-colorful-0.2)
("rust-dirs" ,rust-dirs-3)
("rust-env-logger" ,rust-env-logger-0.8)
("rust-futures" ,rust-futures-0.3)
("rust-gcd" ,rust-gcd-2)
("rust-itertools" ,rust-itertools-0.9)
("rust-log" ,rust-log-0.4)
("rust-rand" ,rust-rand-0.7)
("rust-rlimit" ,rust-rlimit-0.8)
("rust-serde" ,rust-serde-1)
("rust-serde-derive" ,rust-serde-derive-1)
("rust-shell-words" ,rust-shell-words-1)
("rust-structopt" ,rust-structopt-0.3)
("rust-subprocess" ,rust-subprocess-0.2)
("rust-text-placeholder" ,rust-text-placeholder-0.4)
("rust-toml" ,rust-toml-0.5)
("rust-trust-dns-resolver" ,rust-trust-dns-resolver-0.19))
#:cargo-development-inputs (("rust-wait-timeout" ,rust-wait-timeout-0.2))))
(native-inputs (list perl python))
(home-page "https://github.com/rustscan/rustscan";)
(synopsis "Faster Nmap Scanning with Rust")
(description "Faster Nmap Scanning with Rust")
(license license:expat)))
