On Mon, Nov 04, 2024 at 12:42:19PM -0500, Stefan Berger wrote:
>
>
> On 11/4/24 2:32 AM, Gary Lin via Grub-devel wrote:
> > Update the user manual to address TPM2 key protector including the two
> > related commands, tpm2_key_protector_init and tpm2_key_protector_clear,
> > and the user-space utility: grub-protect.
> >
> > Signed-off-by: Gary Lin <g...@suse.com>
> > ---
> > docs/grub.texi | 512 +++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 512 insertions(+)
> >
> > diff --git a/docs/grub.texi b/docs/grub.texi
> > index fdd49d62e..64f10ee34 100644
> > --- a/docs/grub.texi
> > +++ b/docs/grub.texi
> > @@ -6443,6 +6443,8 @@ you forget a command, you can run the command
> > @command{help}
> > * smbios:: Retrieve SMBIOS information
> > * source:: Read a configuration file in same context
> > * test:: Check file types and compare values
> > +* tpm2_key_protector_init:: Initialize the TPM2 key protector
> > +* tpm2_key_protector_clear:: Clear the TPM2 key protector
> > * true:: Do nothing, successfully
> > * trust:: Add public key to list of trusted keys
> > * unset:: Unset an environment variable
> > @@ -8001,6 +8003,56 @@ either @var{expression1} or @var{expression2} is true
> > @end table
> > @end deffn
> > +@node tpm2_key_protector_init
> > +@subsection tpm2_key_protector_init
> > +
> > +@deffn Command tpm2_key_protector_init [@option{-m} mode] | [@option{-p}
> > pcrlist] | [@option{-b} pcrbank] | [ [@option{-T} tpm2key_file] |
> > [@option{-k} keyfile] ] | [@option{-s} handle] | [@option{-a} srk_type] |
> > [@option{-n} nv_index]
> > +Initialize the TPM2 key protector to unseal the key for the
> > @command{cryptomount}
> > +(@pxref{cryptomount}) command. There are two supported modes,
> > +SRK(@kbd{srk}) and NV index(@kbd{nv}), to be specified by the option
>
> For the SRK you should at least once mention that it is in the owner
> hierarchy. If this hierachy has a password you may need additional
> parameters. Once I ran the following command I unfortunately cannot use this
> tool anymore and an previously setup key doesn't load while in grub:
>
> sudo tpm2_changeauth -c owner newpass
>
> The owner hiarchy is now password-protected.
>
> To remove the password:
>
> sudo tpm2_changeauth -c owner -p newpass
>
> If password protection of the owner hierarchy is not supported then you
> should probably also mention this.
>
Good point. The goal of this patchset is to unlock the disk
automatically, so it doesn't expect the password for the owner
hierarchy, at least for now. I'll add a few more words to address the
issue.
>
> > +@option{-m}. The default mode is SRK. The main difference between SRK mode
> > +and NV index mode is the storage of the sealed key. For SRK mode, the
> > sealed
> > +key is stored in a file while NV index mode stores the sealed key in the
> > +non-volatile memory inside TPM with a given NV index.
> > +
> > +The @option{-p} and @option{-b} options are used to supply the PCR list and
> > +bank that the key is sealed with. The PCR list is a comma-separated list,
> > e.g.,
> > +'0,2,4,7,9', to represent the involved PCRs, and the default is '7'. The
> > PCR
> > +bank is chosen by selecting a hash algorithm. The current supported PCR
> > banks
> > +are SHA1, SHA256, SHA384, and SHA512, and the default is SHA256.
> > +
> > +There are some options only available for the specific mode. The
> > SRK-specific
>
>
> Some options are only available for a specific mode.
>
Will fix it in the next version.
>
> > +options are @option{-T}, @option{-k}, @option{-a}, and @option{-s}. On the
> > +other hand, the NV index-specific option is @option{-n}.
> > +
> > +The key file for SRK mode can be supplied with either @option{-T} or
> > +@option{-k}. The @option{-T} option is for the path to the key file in
> > +TPM 2.0 Key File format. Since the parameters for the TPM commands are
> > written
> > +in the file, there is no need to set the PCR list(@option{-p}) and
> > +bank(@option{-b}) when using the @option{-T} option. The @option{-k} option
> > +is for the key file in the raw format, and the @option{-p} and @option{-b}
> > +options are necessary for the non-default PCR list or bank.
> > +
> > +Besides the key file, there are two options, @option{-a} and @option{-s},
> > to
> > +tweak the TPM Storage Root Key (SRK). The SRK can be either created at
> > +runtime or stored in the non-volatile memory. When creating SRK at runtime,
> > +GRUB provides the SRK template to TPM to create the key. There are two SRK
>
> ... to the TPM to ...
>
Will fix it in the next version.
> > +templates for the @option{-a} option, ECC and RSA, and the default is ECC.
> > +If the SRK is stored in a specific handle, e.g. @code{0x81000001}, the
> > +@option{-s} option can be used to set the handle to notify GRUB to load
> > +the SRK from the given handle.
> > +
> > +The only NV index-specific option is the @option{-n} option which is used
> > to
> > +set the NV index containing the sealed key. Then GRUB can load the sealed
> > +key and unseal it with the given PCR list and bank.
> > +@end deffn
> > +
> > +@node tpm2_key_protector_clear
> > +@subsection tpm2_key_protector_clear
> > +
> > +@deffn Command tpm2_key_protector_clear
> > +Clear the TPM2 key protector if previously initialized.
> > +@end deffn
> > @node true
> > @subsection true
> > @@ -8529,6 +8581,7 @@ environment variables and commands are listed in the
> > same order.
> > * Secure Boot Advanced Targeting:: Embedded information for generation
> > number based revocation
> > * Measured Boot:: Measuring boot components
> > * Lockdown:: Lockdown when booting on a secure
> > setup
> > +* TPM2 key protector:: Managing disk key with TPM2 key
> > protector
> > @end menu
> > @node Authentication and authorisation
> > @@ -8772,6 +8825,299 @@ be restricted and some operations/commands cannot
> > be executed.
> > The @samp{lockdown} variable is set to @samp{y} when the GRUB is locked
> > down.
> > Otherwise it does not exit.
> > +@node TPM2 key protector
> > +@section TPM2 key protector in GRUB
> > +
> > +TPM2 key protector extends measured boot to unlock the encrypted partition
> > +without user intervention. It uses the TPM Storage Root Key (SRK) to seal
> > +the disk key with a given set of PCR values. If the system state matches,
> > +i.e. PCR values match the sealed PCR set, TPM2 key protector unseals the
> > +disk key for @command{cryptomount} (@pxref{cryptomount}) to unlock the
> > +encrypted partition. In case the unsealed key fails to unlock the
> > +partition, @command{cryptomount} falls back to the passphrase prompt.
> > +
> > +There are two supported modes to store the sealed key, SRK and NV index.
> > +The details will be addressed in later sections.
> > +
> > +TPM2 key protector is currently only supported on EFI and EMU platforms.
> > +
> > +@subsection TPM PCR usage
> > +
> > +Since TPM2 key protector relies on PCRs to check the system state, it is
> > +important to decide which PCRs to seal the key with. The following table
> > +lists uses of PCRs and the measured objects on EFI platforms.
> > +
> > +@multitable @columnfractions 0.1 0.2 0.7
> > +@headitem PCR @tab Used by @tab Measured Objects
> > +@item 0
> > +@tab Firmware
> > +@tab Core system firmware executable code
> > +@item 1
> > +@tab Firmware
> > +@tab Core system firmware data/host platform configuration; typically
> > +contains serial and model numbers
> > +@item 2
> > +@tab Firmware
> > +@tab Extended or pluggable executable code; includes option ROMs on
> > +pluggable hardware
> > +@item 3
> > +@tab Firmware
> > +@tab Extended or pluggable firmware data; includes information about
> > +pluggable hardware
> > +@item 4
> > +@tab Firmware
> > +@tab Boot loader and additional drivers; binaries and extensions loaded
> > +by the boot loader
> > +@item 5
> > +@tab Firmware
> > +@tab GPT/Partition table
> > +@item 7
> > +@tab Firmware
> > +@tab SecureBoot state
> > +@item 8
> > +@tab GRUB
> > +@tab Commands and kernel command line
> > +@item 9
> > +@tab GRUB
> > +@tab All files read (including kernel image)
> > +@item 9
> > +@tab Linux Kernel
> > +@tab All passed initrds (when the new LOAD_FILE2 initrd protocol is used)
> > +@item 10
> > +@tab Linux Kernel
> > +@tab Protection of the IMA measurement log
> > +@item 14
> > +@tab shim
> > +@tab “MOK” certificates and hashes
> > +@end multitable
> > +
> > +PCR 0, 2, 4, and 7 can be used to check the integrity of the firmware code
> > +and bootloaders. PCR 8 and 9 are useful to check the file and data
> > processed
> > +by GRUB. PCRs 10, 11, 12, 13, and 15 are controlled by the operating
> > system,
> > +so those PCRs are usually still in the initial state when GRUB is running.
> > +
> > +In general, it is nice to include PCR 0, 2, 4, and 7 to ensure the
> > integrity
> > +of the firmware and bootloaders. For PCR 8 and 9, a sophisticated tool is
> > +required to examine the GRUB configuration files and the files to be loaded
> > +to calculate the correct PCR values.
> > +
> > +Please note that PCRs are sensitive to any change, so an update of a
> > component
> > +could invalidate the sealed key, due to the so-called PCR brittleness. For
> > the
> > +bootloader update, PCR 4 may be affected. This can be mitigated by
> > extracting
> > +the events from the TPM event log and predict the value with the updated
> > +bootloader binary. On the other hand, it is difficult to predict PCR 0~7
> > after
> > +a firmware update since the content of the code and the order of drivers
> > may
> > +not follow the TPM event log from the previous firmware version, so it is
> > +necessary to reboot the system to update the measurement results of PCR 0~7
> > +and seal or sign the sealed key again.
> > +
> > +Reference:
> > @url{https://uapi-group.org/specifications/specs/linux_tpm_pcr_registry/,
> > Linux TPM PCR Registry}
> > +
> > +@subsection Setting up the extra disk key
> > +
> > +Instead of using the existing password, it is recommended to seal a new
> > +random disk key and use the existing password for recovery.
> > +
> > +Here are the sample commands to create a 128 random bytes key file and
> > +enroll the key into the target partition (sda2).
> > +
> > +@example
> > +# @kbd{dd if=/dev/urandom of=luks.key bs=1 count=128}
> > +# @kbd{cryptsetup luksAddKey /dev/sda2 luks.key --pbkdf=pbkdf2
> > --hash=sha512}
> > +@end example
> > +
> > +@subsection SRK mode
> > +
> > +To unlock the partition with SRK mode, assume that the sealed key is in
> > +@file{(hd0,gpt1)/efi/grub/sealed.tpm}, the following GRUB commands
> > +unseal the disk key with SRK mode and supply it to @command{cryptomount}.
> > +
> > +@example
> > +grub> @kbd{tpm2_key_protector_init
> > --keyfile=(hd0,gpt1)/efi/grub/sealed.tpm}
> > +grub> @kbd{cryptomount -u <UUID> -P tpm2}
> > +@end example
> > +
> > +There are two programs to create the sealed key for SRK mode:
> > @command{grub-protect}
> > +and @command{pcr-oracle} (@url{https://github.com/okirch/pcr-oracle}).
> > +
> > +The following sample command uses @command{grub-protect} to seal the random
> > +key, @file{luks.key}, with PCR 0, 2, 4 and 7 in TPM 2.0 Key File format.
> > +
> > +@example
> > +@group
> > +# @kbd{grub-protect --action=add \
> > + --protector=tpm2 \
> > + --tpm2-pcrs=0,2,4,7 \
> > + --tpm2key \
> > + --tpm2-keyfile=luks.key \
> > + --tpm2-outfile=/boot/efi/efi/grub/sealed.tpm}
> > +@end group
> > +@end example
> > +
> > +@command{grub-protect} only seals the key with the current PCR values.
> > +Therefore, when a boot component, such as shim or GRUB, is updated, it is
> > +neccessary to reboot the system to update the measurement results and seal
>
> necessary
>
Will fix it in the next version.
>
> > +the key again. That means the random disk key has to be stored in cleartext
> > +for the next key sealing. Besides this, the measurement result of some PCRs
> > +may differ between boot time and OS runtime. For example, PCR 9 measures
> > the
> > +files loaded by GRUB including the Linux kernel and initrd. To unlock the
> > disk
> > +containing the kernel and initrd, the key has to be sealed with PCR 9 value
> > +before loading the kernel and initrd. However, PCR 9 changes after GRUB
> > +loading the kernel and initrd, so PCR 9 at OS runtime cannot be used
> > directly
> > +for key sealing.
> > +
> > +To solve these problems, @command{pcr-oracle} takes a different approach.
> > It
> > +reads the TPM eventlog and predicts the PCR values. Besides,
> > +@command{pcr-oracle} also supports ``authorized policy'' which allows the
> > +PCR policy to be updated with a valid signature, so that the user only
> > seals
> > +the random disk key once. If at some later time the PCR values change due
> > to
> > +an update of the system firmware, bootloader, or config file, the user just
> > +needs to update the signature of PCR policy.
>
> of the PCR policy.
>
Will fix it in the next version.
>
> > +
> > +To seal the key with the authorized policy, the first thing is to generate
> > +the RSA policy key, @file{policy-key.pem}, and the authorized policy file,
> > +@file{authorized.policy}. In this example, PCR 0, 2, 4, 7 and 9 are chosen
> > +for key sealing.
> > +
> > +@example
> > +@group
> > +# @kbd{pcr-oracle --rsa-generate-key \
> > + --private-key policy-key.pem \
> > + --auth authorized.policy \
> > + create-authorized-policy 0,2,4,7,9}
> > +@end group
> > +@end example
> > +
> > +Then, we seal the random disk key, @file{luks.key}, with the authorized
> > +policy file and save the sealed key in @file{sealed.key}.
> > +
> > +@example
> > +@group
> > +# @kbd{pcr-oracle --key-format tpm2.0 \
> > + --auth authorized.policy \
> > + --input luks.key \
> > + --output sealed.key \
> > + seal-secret}
> > +@end group
> > +@end example
> > +
> > +Since we now have the sealed key, we can remove the random disk key file
> > +@file{lukes.key}.
>
> -> luks.key
>
Will fix it in the next version.
> > +
> > +The last step is to sign the predicted PCR policy and save the final key
> > +file, @file{sealed.tpm}.
> > +
> > +@example
> > +@group
> > +# @kbd{pcr-oracle --key-format tpm2.0 \
> > + --private-key policy-key.pem \
> > + --from eventlog \
> > + --stop-event "grub-file=grub.cfg" \
> > + --after \
> > + --input sealed.key \
> > + --output /boot/efi/efi/grub/sealed.tpm \
> > + sign 0,2,4,7,9}
> > +@end group
> > +@end example
> > +
> > +Here we also set a stop event for the prediction. With
> > +@kbd{--stop-event grub-file=grub.cfg --after}, @command{pcr-oracle} stops
> > +the calculation of PCR values right after GRUB loads @file{grub.cfg}.
> > +
> > +When shim or GRUB updates, it only requires to run the last
> > @command{pcr-oracle}
>
> When/After the shim or GRUB are updated, ...
>
Will fix it in the next version.
> > +command to update the predicted PCR policy.
> > +
> > +@subsection NV index mode
> > +
> > +Instead of storing the sealed key in a file, NV index mode uses the TPM
> > +non-volatile memory to store the sealed key.
> > +
> > +The following sample commands use tpm2-tools
> > (@url{https://github.com/tpm2-software/tpm2-tools})
> > +commands to seal @file{luks.key} into the specific NV index:
> > @kbd{0x81000000}.
> > +
> > +First, we need to create the object file for the primary key, i.e. storage
> > +root key (SRK) with the default key settings in GRUB: SHA256 hash algorithm
> > +and ECC key algorithm.
> > +
> > +@example
> > +# @kbd{tpm2_createprimary -C o -g sha256 -G ecc -c primary.ctx}
> > +@end example
> > +
> > +The next commands collect the current values of PCR 0, 2, 4, and 7 and
> > saves
> > +them in @file{pcr.dat}.
> > +
> > +@example
> > +# @kbd{tpm2_startauthsession -S session.dat}
> > +# @kbd{tpm2_policypcr -S session.dat -l sha256:0,2,4,7 -f pcrs.dat -L
> > policy.dat}
> > +# @kbd{tpm2_flushcontext session.dat}
> > +@end example
> > +
> > +The last commands seal @file{luks.key} with the primary key and stores the
> > +result in @kbd{0x81000000}.
> > +
> > +@example
> > +# @kbd{cat luks.key | tpm2_create -C primary.ctx -u key.pub -r key.priv -L
> > policy.dat -i-}
> > +# @kbd{tpm2_load -C primary.ctx -u key.pub -r key.priv -n sealing.name -c
> > sealing.ctx}
> > +# @kbd{tpm2_evictcontrol -C o -c sealing.ctx 0x81000000}
> > +@end example
> > +
>
> > +To unseal the key, we have to specify the mode, @kbd{nv}, the NV index,
>
> (I think) drop comma after mode and NV index
>
Okay, dropping comma looks better.
> > +@kbd{0x81000000}, and the PCRs, @kbd{0,2,4,7} for
> > @command{tpm2_key_protector_init}
>
> drop comma after PCRs
>
> for the @command{...}
>
Will fix it in the next version.
> > +command.
> > +
> > +@example
> > +grub> @kbd{tpm2_key_protector_init --mode=nv --nvindex=0x81000000
> > --pcrs=0,2,4,7}
> > +grub> @kbd{cryptomount -u <UUID> --protector tpm2}
> > +@end example
> > +
> > +@subsection Setting up software TPM for EMU platform
> > +
> > +In order to test TPM2 key protector and TPM2 Software Stack (TSS2), it is
> > +handy to set up a software TPM (swtpm) instance and run the commands on the
>
> handy -> useful or necessary ?
>
I will replace 'handy' with 'useful'.
> > +EMU platform.
> > +
> > +Here are the commands to start a swtpm instance which provides a character
> > +device interface. To store the TPM states, the directory,
> > @file{swtpm-state},
> > +is created before the @command{swtpm} command. All the messages are stored
> > +in @file{swtpm.log} including the name of the character device.
> > +
> > +@example
> > +# @kbd{mkdir swtpm-state}
> > +@group
> > +# @kbd{swtpm chardev --vtpm-proxy --tpmstate dir=swtpm-state \
> > + --tpm2 --ctrl type=unixio,path="swtpm-state/ctrl" \
> > + --flags startup-clear --daemon > swtpm.log}
> > +@end group
> > +@end example
> > +
> > +Then, we extract the name of the character device from @file{swtpm.log} and
> > +save it to the variable, @samp{tpm2dev}.
> > +
> > +@example
> > +# @kbd{tpm2dev=$(grep "New TPM device" swtpm.log | cut -d' ' -f 4)}
> > +@end example
> > +
> > +Now we can start @kbd{grub-emu} with @kbd{--tpm-device $tpm2dev} to
> > interact
> > +with the swtpm instance.
> > +
> > +@example
> > +# @kbd{grub-emu --tpm-device $tpm2dev}
> > +@end example
> > +
> > +On the host, the tpm2-tools commands can interact with the swtpm instance
> > by
> > +setting @samp{TPM2TOOLS_TCTI}.
> > +
> > +@example
> > +# @kbd{export TPM2TOOLS_TCTI="device:$tpm2dev"}
> > +@end example
> > +
> > +When the test is done, use @kbd{swtpm_ioctl} to send the shutdown
> > +command through the swtpm control channel.
> > +
> > +@example
> > +# @kbd{swtpm_ioctl -s --unix swtpm-state/ctrl}
> > +@end example
> > +
> > @node Platform limitations
> > @chapter Platform limitations
> > @@ -9212,6 +9558,7 @@ bootability on other machines.
> > * Invoking grub-mkrescue:: Make a GRUB rescue image
> > * Invoking grub-mount:: Mount a file system using GRUB
> > * Invoking grub-probe:: Probe device information for GRUB
> > +* Invoking grub-protect:: Protect a disk key with a key protector
> > * Invoking grub-script-check:: Check GRUB script file for syntax errors
> > @end menu
> > @@ -9594,6 +9941,171 @@ Print verbose messages.
> > @end table
> > +@node Invoking grub-protect
> > +@section Invoking grub-protect
> > +
> > +The program @command{grub-protect} protects a disk encryption key with
> > +a specified key protector.
> > +
> > +@table @option
> > +@item --help
> > +Print a summary of the command-line options and exit.
> > +
> > +@item --version
> > +Print the version number of GRUB and exit.
> > +
> > +@item -a add|remove
> > +@itemx --action=add|remove
> > +Add or remove a key protector to or from a key.
> > +
> > +@item -p
> > +@itemx --protector=@var{protector}
> > +Set the key protector. Currently, @samp{tpm2} is the only supported key
> > +protector.
> > +
> > +@item --tpm2-asymmetric=@var{type}
> > +Choose the the type of SRK. The valid options are @samp{RSA}
> > (@samp{RSA2048})
> > +and @samp{ECC} (@samp{ECC_NIST_P256}).(default: @samp{ECC})
> > +
> > +@item --tpm2-bank=@var{alg}
> > +Choose bank of PCRs used to authorize key release: @samp{SHA1},
> > @samp{SHA256},
> > +@samp{SHA384}, or @samp{SHA512}. (default: @samp{SHA256})
> > +
> > +@item --tpm2-device=@var{device}
> > +Set the path to the TPM2 device. (default: @samp{/dev/tpm0})
> > +
> > +@item --tpm2-evict
> > +Evict a previously persisted SRK from the TPM, if any.
> > +
> > +@item --tpm2-keyfile=@var{file}
> > +Set the path to a file that contains the cleartext key to protect.
> > +
> > +@item --tpm2-outfile=@var{file}
> > +Set the path to the file that will contain the key after sealing
> > +(must be accessible to GRUB during boot).
> > +
> > +@item --tpm2-pcrs=@var{pcrs}
> > +Set a comma-separated list of PCRs used to authorize key release e.g.,
> > @samp{7,11}.
> > +Please be aware that PCR 0~7 are used by the firmware and the measurement
> > result
> > +may change after a firmware update (for baremetal systems) or a package
> > +(OVMF/SeaBIOS/SLOF) update in the VM host. This may lead to the failure of
> > key
>
> You may want to remove SeaBIOS since you are not supporting the BIOS API for
> TPMs. I am testing with SLOF support, though, so SLOF can remain.
>
Okay, I currently have no plan for SeaBIOS anyway.
> > +unsealing. (default: @samp{7})
> > +
> > +@item --tpm2-srk=@var{handle}
> > +Set the SRK handle, e.g. @samp{0x81000000}, if the SRK is to be made
> > persistent.
> > +
> > +@item --tpm2key
> > +Use TPM 2.0 Key File format.
> > +
> > +@end table
> > +
> > +Before sealing the key, please check the TPM PCR usage
> > +(@pxref{TPM2 key protector, TPM PCR usage}) to choose a proper set of PCRs.
> > +
> > +Assume that there is a key file, @file{luks.key}, to be sealed with PCR 0,
> > 2,
> > +4, and 7, and here is the @command{grub-protect} command to create the
> > sealed
> > +key file:
> > +
> > +@example
> > +@group
> > +# @kbd{grub-protect --action=add \
> > + --protector=tpm2 \
> > + --tpm2-pcrs=0,2,4,7 \
> > + --tpm2key \
> > + --tpm2-keyfile=luks.key \
> > + --tpm2-outfile=/boot/efi/efi/grub/sealed.tpm}
> > +@end group
> > +@end example
> > +
> > +Then, GRUB can unlock the target partition with the following commands:
> > +
> > +@example
> > +grub> @kbd{tpm2_key_protector_init
> > --keyfile=(hd0,gpt1)/efi/grub/sealed.tpm}
> > +grub> @kbd{cryptomount -u <UUID> -P tpm2}
> > +@end example
> > +
> > +In most of cases, the user only needs to create the key with the `add'
> > action.
> > +If auto-unlocking is unwanted, just remove the file and the
> > +@command{tpm2_key_protector_init} command and invoke the
> > @command{cryptomount}
> > +command without @kbd{-P tpm2}.
> > +
> > +The only case for the `remove' action is when the SRK is made persistent.
>
> use case
>
Will fix it in the next version.
> > +
> > +There are two supported SRKs in @command{grub-protect}: @samp{RSA} and
> > @samp{ECC}.
> > +Due to slower key generation, some users of the @samp{RSA} SRK would prefer
>
> would -> may ?
>
Will fix it in the next version.
Thanks,
Gary Lin
> > +making it persistent so that the TPM can skip the SRK generation when GRUB
> > tries
> > +to unseal the key.
> > +
> > +The available persistent handles can be checked with @command{tpm2_getcap}.
> > +
> > +@example
> > +@group
> > +# @kbd{tpm2_getcap properties-variable}
> > +...
> > +TPM2_PT_HR_PERSISTENT: 0x0
> > +TPM2_PT_HR_PERSISTENT_AVAIL: 0x41
> > +...
> > +@end group
> > +@end example
> > +
> > +In this system, there is no persistent handle. A TPM handle is an unsigned
> > +32-bit integer, and the persistent handles starts with @samp{0x81}. Here
> > +we choose the well-known persistent handle: @samp{0x81000000}.
> > +
> > +@example
> > +@group
> > +# @kbd{grub-protect --action=add \
> > + --protector=tpm2 \
> > + --tpm2-pcrs=0,2,4,7 \
> > + --tpm2-asymmetric=RSA \
> > + --tpm2-srk=0x81000000 \
> > + --tpm2key \
> > + --tpm2-keyfile=luks.key \
> > + --tpm2-outfile=/boot/efi/efi/grub/sealed.tpm}
> > +@end group
> > +@end example
> > +
> > +The additional @kbd{--tpm2-asymmetric=RSA} and @kbd{--tpm2-srk=0x81000000}
> > +options are used to make the key sealed with the RSA SRK and store the SRK
> > +in @samp{0x81000000}.
> > +
> > +For the @command{tpm2_key_protector_init} command, the additional @kbd{-s
> > 0x81000000}
> > +informs the TPM2 key protector to fetch the SRK from @samp{0x81000000}.
> > +
> > +@example
> > +grub> @kbd{tpm2_key_protector_init -s 0x81000000
> > --keyfile=(hd0,gpt1)/efi/grub/sealed.tpm}
> > +grub> @kbd{cryptomount -u <UUID> -P tpm2}
> > +@end example
> > +
> > +After making the SRK handle persistent, we can check the status of the
> > +persistent handles with @command{tpm2_getcap}.
> > +
> > +@example
> > +@group
> > +# @kbd{tpm2_getcap properties-variable}
> > +...
> > +TPM2_PT_HR_PERSISTENT: 0x1
> > +TPM2_PT_HR_PERSISTENT_AVAIL: 0x40
> > +...
> > +# @kbd{tpm2_getcap handles-persistent}
> > +- 0x81000000
> > +@end group
> > +@end example
> > +
> > +The sealed key can be removed once the user does not want to use the TPM2
> > key
> > +protector anymore. Here is the command to remove the persistent SRK handle
> > +(@samp{0x81000000}) with @kbd{--tpm2-srk} and @kbd{--tpm2-evict}.
> > +
> > +@example
> > +@group
> > +# @kbd{grub-protect --action=remove \
> > + --protector=tpm2 \
> > + --tpm2-srk 0x81000000 \
> > + --tpm2-evict}
> > +@end group
> > +@end example
> > +
> > +
> > @node Invoking grub-script-check
> > @section Invoking grub-script-check
>
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
https://lists.gnu.org/mailman/listinfo/grub-devel
