On Wed, 15 Jun 2022 11:43:25 +0200
Fabian Vogt <fv...@suse.de> wrote:
> Hi,
>
> Am Mittwoch, 15. Juni 2022, 04:43:03 CEST schrieb Glenn Washburn:
> > From: Pierre-Louis Bonicoli <pierre-louis.bonic...@libregerbil.fr>
> >
> > The logical sector size used by LUKS1 is 512 bytes and LUKS2 uses 512 to
> > 4069 bytes. The deafualt password used is "pass", but can be overridden
> > by setting the PASS environment variable. The device mapper name is set
> > to the name of the temp directory so that its easy to corrolate device
> > mapper name with a particular test run. Also since this name is unique
> > per test run, multiple simultaneous test runs are allowed.
> >
> > Note that cryptsetup is passing the --disable-locks parameter to allow
> > cryptsetup run successfully when /run/lock/cryptsetup is not accessible.
> > Since the device mapper name is unique per test run, there is no need to
> > worry about locking the device to serialize access.
> >
> > Signed-off-by: Pierre-Louis Bonicoli <pierre-louis.bonic...@libregerbil.fr>
> > Signed-off-by: Glenn Washburn <developm...@efficientek.com>
> > ---
> > This is a heavily modified version of Pierre-Louis's v2 patch. It has been
> > tested with Fabian's v3 and Josselin's v4 series. Some notable differences
> > from the previous version:
> > * Rebase on to master accounting for cleanup() changes
> > * Allow multple tests runs to run simultaneously
> > * Allow specifying alternate password with environment variable
> > * Fixed bug in previous version where LC_ALL=C was being set for echo and
> > not run_it
> > * Make output on UUID fail consistent with other filesystems
> > * Allow tests to work with older cryptsetups
> > * Fixed bug where luks1 tests were actually testing luks2
> > * Address my review comments
> >
> > Note: The luks2 test will fail without some form of working grub-probe
> > support for luks2. This patch is independent of the above mentioned
> > patch series, will apply without them just fine, and can be reviewed
> > independently.
> >
> > Glenn
> > ---
> > .gitignore | 2 ++
> > Makefile.util.def | 12 ++++++++
> > tests/luks1_test.in | 23 +++++++++++++++
> > tests/luks2_test.in | 23 +++++++++++++++
> > tests/util/grub-fs-tester.in | 57 ++++++++++++++++++++++++++++++++++--
> > 5 files changed, 115 insertions(+), 2 deletions(-)
> > create mode 100644 tests/luks1_test.in
> > create mode 100644 tests/luks2_test.in
> >
> > diff --git a/.gitignore b/.gitignore
> > index f6a1bd051..4064d3d1e 100644
> > --- a/.gitignore
> > +++ b/.gitignore
> > @@ -230,6 +230,8 @@ widthspec.bin
> > /lib/libgcrypt-grub
> > /libgrub_a_init.c
> > /lzocompress_test
> > +/luks1_test
> > +/luks2_test
> > /m4/
> > /minixfs_test
> > /missing
> > diff --git a/Makefile.util.def b/Makefile.util.def
> > index d919c562c..3f1162b76 100644
> > --- a/Makefile.util.def
> > +++ b/Makefile.util.def
> > @@ -1213,6 +1213,18 @@ script = {
> > common = tests/syslinux_test.in;
> > };
> >
> > +script = {
> > + testcase = native;
> > + name = luks1_test;
> > + common = tests/luks1_test.in;
> > +};
> > +
> > +script = {
> > + testcase = native;
> > + name = luks2_test;
> > + common = tests/luks2_test.in;
> > +};
> > +
> > program = {
> > testcase = native;
> > name = example_unit_test;
> > diff --git a/tests/luks1_test.in b/tests/luks1_test.in
> > new file mode 100644
> > index 000000000..cd28fd714
> > --- /dev/null
> > +++ b/tests/luks1_test.in
> > @@ -0,0 +1,23 @@
> > +#!@BUILD_SHEBANG@
> > +
> > +set -e
> > +
> > +if [ "x$EUID" = "x" ] ; then
> > + EUID=`id -u`
> > +fi
> > +
> > +if [ "$EUID" != 0 ] ; then
> > + exit 99
> > +fi
> > +
> > +if ! which mkfs.ext2 >/dev/null 2>&1; then
> > + echo "mkfs.ext2 not installed; cannot test luks."
> > + exit 99
> > +fi
> > +
> > +if ! which cryptsetup >/dev/null 2>&1; then
> > + echo "cryptsetup not installed; cannot test luks."
> > + exit 99
> > +fi
> > +
> > +"@builddir@/grub-fs-tester" luks1
> > diff --git a/tests/luks2_test.in b/tests/luks2_test.in
> > new file mode 100644
> > index 000000000..6a26ba626
> > --- /dev/null
> > +++ b/tests/luks2_test.in
> > @@ -0,0 +1,23 @@
> > +#!@BUILD_SHEBANG@
> > +
> > +set -e
> > +
> > +if [ "x$EUID" = "x" ] ; then
> > + EUID=`id -u`
> > +fi
> > +
> > +if [ "$EUID" != 0 ] ; then
> > + exit 99
> > +fi
> > +
> > +if ! which mkfs.ext2 >/dev/null 2>&1; then
> > + echo "mkfs.ext2 not installed; cannot test luks2."
> > + exit 99
> > +fi
> > +
> > +if ! which cryptsetup >/dev/null 2>&1; then
> > + echo "cryptsetup not installed; cannot test luks2."
> > + exit 99
> > +fi
> > +
> > +"@builddir@/grub-fs-tester" luks2
> > diff --git a/tests/util/grub-fs-tester.in b/tests/util/grub-fs-tester.in
> > index 43f6175c3..e488c0e41 100644
> > --- a/tests/util/grub-fs-tester.in
> > +++ b/tests/util/grub-fs-tester.in
> > @@ -6,6 +6,7 @@ export BLKID_FILE=/dev/null
> > fs="$1"
> >
> > GRUBFSTEST="@builddir@/grub-fstest"
> > +GRUBPROBE="@builddir@/grub-probe"
> >
> > tempdir=`mktemp -d "${TMPDIR:-/tmp}/${0##*/}.$(date
> > '+%Y%m%d%H%M%S%N').${fs}.XXX"` ||
> > { echo "Failed to make temporary directory"; exit 99; }
> > @@ -13,6 +14,8 @@ tempdir=`mktemp -d "${TMPDIR:-/tmp}/${0##*/}.$(date
> > '+%Y%m%d%H%M%S%N').${fs}.XXX
> > # xorriso -as mkisofs options to ignore locale when processing file names
> > and
> > # FSLABEL. This is especially needed for the conversion to Joliet UCS-2.
> > XORRISOFS_CHARSET="-input-charset UTF-8 -output-charset UTF-8"
> > +DMNAME="${tempdir##*/}"
> > +PASS="${PASS:-pass}"
> >
> > MOUNTS=
> > LODEVICES=
> > @@ -28,6 +31,10 @@ cleanup() {
> > umount "$i" || :
> > done
> >
> > + if [ -e /dev/mapper/"$DMNAME" ]; then
> > + cryptsetup close --disable-locks "$DMNAME"
> > + fi
> > +
> > for lodev in $LODEVICES; do
> > local i=600
> > while losetup -l -O NAME | grep -q "^$lodev\$"; do
> > @@ -68,7 +75,12 @@ run_grubfstest () {
> > need_images="$need_images $FSIMAGEP${i}.img";
> > done
> >
> > - run_it -c $NEED_IMAGES_N $need_images "$@"
> > + case x"$fs" in
> > + xluks*)
> > + echo -n "$PASS" | run_it -C -c $NEED_IMAGES_N $need_images "$@";;
> > + *)
> > + run_it -c $NEED_IMAGES_N $need_images "$@";;
> > + esac
> > }
> >
> > # OS LIMITATION: GNU/Linux has no AFS support, so we use a premade image
> > and a reference tar file. I.a. no multiblocksize test
> > @@ -76,6 +88,8 @@ run_grubfstest () {
> > MINLOGSECSIZE=9
> > MAXLOGSECSIZE=9
> > case x"$fs" in
> > + xluks2)
> > + MAXLOGSECSIZE=12;;
> > xntfs*)
> > MINLOGSECSIZE=8
> > MAXLOGSECSIZE=12;;
> > @@ -363,7 +377,7 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE"
> > "$MAXLOGSECSIZE" 1); do
> > #FSLABEL="g;/_é莭莽😁кит u"
> > ;;
> > # FS LIMITATION: reiserfs, extN and jfs label is at most 16
> > UTF-8 characters
> > - x"reiserfs_old" | x"reiserfs" | x"ext"* | x"lvm"* | x"mdraid"*
> > | x"jfs" | x"jfs_caseins")
> > + x"reiserfs_old" | x"reiserfs" | x"ext"* | x"lvm"* | x"luks"* |
> > x"mdraid"* | x"jfs" | x"jfs_caseins")
> > FSLABEL="g;/éт 莭😁";;
> > # FS LIMITATION: No underscore, space, semicolon, slash or
> > international characters in UFS* in label. Limited to 32 UTF-8 characters
> > x"ufs1" | x"ufs1_sun" | x"ufs2")
> > @@ -832,6 +846,12 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE"
> > "$MAXLOGSECSIZE" 1); do
> > MOUNTDEVICE="/dev/mapper/grub_test-testvol"
> > MOUNTFS=ext2
> > "mkfs.ext2" -L "$FSLABEL" -q "${MOUNTDEVICE}" ;;
> > + x"luks"*)
> > + echo -n "$PASS" | cryptsetup luksFormat --type "$fs"
> > --sector-size $SECSIZE --pbkdf pbkdf2 --disable-locks $LODEVICE
>
> With the default "pass" password this fails here due to pwquality checks.
> Can you add "--force-password"? With that it works fine here, both LUKS1 and
> with the required patches also LUKS2.
Yes, I can, but I'm curious why I'm not seeing this. What version of
cryptsetup are you using and for what distro?
Glenn
>
> Thanks,
> Fabian
>
> > + echo -n "$PASS" | cryptsetup open --disable-locks $LODEVICE
> > "$DMNAME"
> > + MOUNTDEVICE="/dev/mapper/${DMNAME}"
> > + MOUNTFS=ext2
> > + "mkfs.ext2" -L "$FSLABEL" -q "${MOUNTDEVICE}" ;;
> > xf2fs)
> > "mkfs.f2fs" -l "$FSLABEL" -q "${MOUNTDEVICE}" ;;
> > xnilfs2)
> > @@ -944,6 +964,22 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE"
> > "$MAXLOGSECSIZE" 1); do
> > GRUBDEVICE="mduuid/`mdadm --detail --export $MOUNTDEVICE |
> > grep MD_UUID=|sed 's,MD_UUID=,,g;s,:,,g'`";;
> > xlvm*)
> > GRUBDEVICE="lvm/grub_test-testvol";;
> > + xluks*)
> > + if test x"$fs" = xluks2 && ! (cryptsetup luksDump
> > --debug-json --disable-locks $LODEVICE | grep -q
> > "\"sector_size\":$SECSIZE"); then
> > + echo "Unexpected sector size for $LODEVICE
> > (expected: $SECSIZE)"
> > + exit 1
> > + fi
> > +
> > + UUID=$(cryptsetup luksUUID --disable-locks $LODEVICE | tr
> > -d '-')
> > + PROBE_UUID=$("$GRUBPROBE" --device $MOUNTDEVICE
> > --target=cryptodisk_uuid)
> > + if [ x"$UUID" != x"$PROBE_UUID" ]; then
> > + echo "UUID FAIL"
> > + echo "$UUID"
> > + echo "$PROBE_UUID"
> > + exit 1
> > + fi
> > + GRUBDEVICE="cryptouuid/${UUID}"
> > + ;;
> > esac
> > GRUBDIR="($GRUBDEVICE)"
> > case x"$fs" in
> > @@ -1102,6 +1138,15 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE"
> > "$MAXLOGSECSIZE" 1); do
> > sleep 1
> > vgchange -a n grub_test
> > ;;
> > + xluks*)
> > + for try in $(range 0 20 1); do
> > + if umount "$MNTPOINTRW" ; then
> > + break;
> > + fi
> > + done
> > + UMOUNT_TIME=$(date -u "+%Y-%m-%d %H:%M:%S")
> > + cryptsetup close --disable-locks "$DMNAME"
> > + ;;
> > xmdraid*)
> > sleep 1
> > for try in $(range 0 20 1); do
> > @@ -1152,6 +1197,11 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE"
> > "$MAXLOGSECSIZE" 1); do
> > mount -t "$MOUNTFS" "${MOUNTDEVICE}" "$MNTPOINTRO" -o
> > ${MOUNTOPTS}${SELINUXOPTS}ro
> > MOUNTS="$MOUNTS $MNTPOINTRO"
> > ;;
> > + xluks*)
> > + echo -n "$PASS" | cryptsetup open --disable-locks $LODEVICE
> > "$DMNAME"
> > + mount -t "$MOUNTFS" "${MOUNTDEVICE}" "$MNTPOINTRO" -o
> > ${MOUNTOPTS}${SELINUXOPTS}ro
> > + MOUNTS="$MOUNTS $MNTPOINTRO"
> > + ;;
> > xmdraid*)
> > mdadm --assemble /dev/md/"${fs}_$NDEVICES" $LODEVICES
> > sleep 1
> > @@ -1600,6 +1650,9 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE"
> > "$MAXLOGSECSIZE" 1); do
> > vgchange -a n grub_test
> > sleep 1
> > ;;
> > + xluks*)
> > + cryptsetup close --disable-locks "$DMNAME"
> > + ;;
> > esac
> > case x"$fs" in
> > x"tarfs" | x"cpio_"* | x"iso9660" | xrockridge | xjoliet |
> > xrockridge_joliet | x"ziso9660" | x"romfs" | x"squash4_"* | x"iso9660_1999"
> > | xrockridge_1999 | xjoliet_1999 | xrockridge_joliet_1999) ;;
> >
>
>
>
>
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
https://lists.gnu.org/mailman/listinfo/grub-devel
