Hello
After some tests on different boxes I found out that terminal_input at_keyboard
does work well on some hardware :
- Dell laptop & tower : OK. Some keys doesn't respond (such as escape), but
this may correspond to the "Unknown keyboard scan code" message
- Acer laptop : fails
- HP laptop : fails
So it may confirm a bios issue (please note that firmware is up-to-date on
every box).
However I've also lost interest in this feature as my main usage was to be able
to enter a LUKS password in my native language and unfortunately I found out
despites that keymap works as intended on Dell computers, Grub2 still asks for
password in us layout. AFAIU disk decryption is executed even before grub.cfg
is read, so this might mean that the layout stuff has to be installed at early
disk place.
dud
From: dud...@hotmail.com
To: arvidj...@gmail.com
CC: bug-g...@gnu.org; grub-devel@gnu.org; gamber...@libero.it
Subject: RE: Changing default keyboard layout
Date: Thu, 13 Aug 2015 21:05:48 +0200
> To be sure - does it hang without at_keyboard as well?
No it doesn't with only the keymap line (but the layout is still us).
> First try to reproduce it without GUI - it is rather hard to see
> anything in this case. Just boot grub without any grub.cfg - you will be
> left in plain CLI. Now try
>
> insmod at_keyboard
> terminal_input at_keyboard
Hangs right after this last command.
>
> does it still work? If yes, try keymap /grub/layout.gkb; does it still work?
>
> and to be sure - could you send me your gkb file for test?
Sure you'll find it enclosed. Please also note that grub-kbdcomp is displaying
the following warnings when creating the file :
Unknown keyboard scan code 0x54
Unknown keyboard scan code 0x65
Unknown keyboard scan code 0x7f
Thanks for your help.
dud
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
https://lists.gnu.org/mailman/listinfo/grub-devel
