On Thu, Aug 20, 2009 at 10:56:09PM +0200, Vladimir 'phcoder' Serbinenko wrote:
> On Thu, Aug 20, 2009 at 6:28 PM, Robert Millan<r...@aybabtu.com> wrote:
> > On Wed, Aug 19, 2009 at 05:38:58PM +0200, Vladimir 'phcoder' Serbinenko
> > wrote:
> >> On Wed, Aug 19, 2009 at 5:34 PM, Robert Millan<r...@aybabtu.com> wrote:
> >> > On Wed, Aug 19, 2009 at 01:54:46PM +0200, Vladimir 'phcoder' Serbinenko
> >> > wrote:
> >> >> This is a dirty import of multiboot specification from grub1. It
> >> >> doesn't compile it unless explicitly requested since we don't have
> >> >> appropriate autoconf tests yet. The main goal is to leave no current
> >> >> documentation in grub1 trunk. Everything in this patch is copy-pasted
> >> >> from grub1
> >> >
> >> > Actually, my plan was to move this to a separate module. I even sent a
> >> > patch,
> >> > long ago.
> >> It would be ok with me to do so.
> >
> > Yes. Would you like to review my patch?
> >
> +AC_INIT([Multiboot], [1], addr...@hidden)
> Current version of multiboot spec is 0.69. If we want to increase
> version we need to clarify few aspects first but I feel like its
> discussion should be a separate thread.
Agreed.
> Patch on ML archive is garbled (addr...@hidden around every @). Can
> you resend it?
Here you are.
--
Robert Millan
The DRM opt-in fallacy: "Your data belongs to us. We will decide when (and
how) you may access your data; but nobody's threatening your freedom: we
still allow you to remove your data and not access it at all."
#!/bin/bash -e
static_files=`mktemp`
for i in \
INSTALL autogen.sh README COPYING AUTHORS .cvsignore NEWS configure.ac \
Makefile.am ChangeLog docs/multiboot.texi docs/.cvsignore docs/Makefile.am \
docs/src2texi docs/kernel.c docs/boot.S docs/help2man docs/multiboot.h ; do
echo ./$i
done > $static_files
# be careful before removing stuff
test -e docs/multiboot.texi || exit 1
find . -type f | \
while read i ; do
if ! grep -qx "$i" $static_files ; then
rm -f $i
fi
done
rm -f $static_files
for i in 1 2 ; do
find . -type d -empty | xargs rmdir
done
patch -p1 < $0
exit 0
diff -Nur multiboot/AUTHORS multiboot.good/AUTHORS
--- multiboot/AUTHORS 2004-03-27 18:02:53.000000000 +0100
+++ multiboot.good/AUTHORS 2008-02-08 23:06:09.000000000 +0100
@@ -1,54 +1,5 @@
-VaX#n8 (real name unknown) wrote shared_src/fsys_ext2fs.c.
-
-Heiko Schroeder rewrote shared_src/stage1.S to be more readable.
The following authors assigned copyright on their work to the Free
Software Foundation:
-Erich Stefan Boleyn originally designed and implemented GRUB.
-
-Gordon Matzigkeit adopted GRUB into the GNU Project. He fixed several
-bugs, added symbolic link support to shared_src/fsys_ext2fs.c, and
-began the implementation of /sbin/grub. He was an official maintainer.
-
-Yoshinori K. Okuji contributed many bugfixes and new features, such as
-working LBA support, /sbin/grub support for configuration files, the
-script /sbin/grub-install, the utility /bin/mbchk, the new engine for
-builtin commands, disk swapping support, keyboard configuration support,
-network support, online help support, command-line history support,
-hidden menu support, the new Linux loader, serial terminal support,
-single-line editing support, the utility /sbin/grub-md5-crypt, the new
-GRUB manual, and several new commands. He is the current official
-maintainer.
-
-Peter Astrand added support for a color menu.
-
-Pavel Roskin contributed many bugfixes and new features, such as FreeBSD
-support for the grub shell, and configure process cleanups.
-
-Klaus Reichl wrote stage2/fsys_minix.c.
-
Per Lundberg added graphics support to the Multiboot Specification.
-
-Jochen Hoenicke rewrote stage2/fsys_fat.c and wrote
-stage2/fsys_reiserfs.c and stage2/md5.c.
-
-Christoph Plattner added support for Net Boot Image Proposal.
-
-Frank Mehnert added support for hercules console.
-
-Kristoffer Branemyr added VSTa filesystem support.
-
-Serguei Tzukanov added JFS and XFS support.
-
-Jason Thomas added Linux DAC960 support and support for hiding/unhiding
-logical partitions, and did a significant bugfix for the terminal stuff.
-
-Tilmann Bubeck added support for vt100-incompatible terminals.
-
-KB Sriram added a better detection of FAT filesystem and fixed a
-network device completion.
-
-Eric Kvaalen fixed a lot of problems in the GRUB manual.
-
-Leonid Lisovskiy added El Torito support.
diff -Nur multiboot/autogen.sh multiboot.good/autogen.sh
--- multiboot/autogen.sh 1970-01-01 01:00:00.000000000 +0100
+++ multiboot.good/autogen.sh 2008-02-08 23:11:31.000000000 +0100
@@ -0,0 +1,10 @@
+#! /bin/sh
+
+set -ex
+
+aclocal
+autoheader
+automake --add-missing
+autoconf
+
+exit 0
diff -Nur multiboot/configure.ac multiboot.good/configure.ac
--- multiboot/configure.ac 2007-11-05 02:29:46.000000000 +0100
+++ multiboot.good/configure.ac 2008-02-08 22:56:20.000000000 +0100
@@ -1,5 +1,5 @@
dnl Configure script for GRUB.
-dnl Copyright 1999,2000,2001,2002,2003,2004,2005 Free Software Foundation, Inc.
+dnl Copyright 1999,2000,2001,2002,2003,2004,2005,2008 Free Software
Foundation, Inc.
dnl Permission to use, copy, modify and distribute this software and its
dnl documentation is hereby granted, provided that both the copyright
@@ -13,42 +13,12 @@
dnl USE OF THIS SOFTWARE.
AC_PREREQ(2.57)
-AC_INIT([GRUB], [0.97], [bug-g...@gnu.org])
-AC_CONFIG_SRCDIR([stage2/stage2.c])
+AC_INIT([Multiboot], [1], [bug-g...@gnu.org])
+AC_CONFIG_SRCDIR([docs/multiboot.texi])
AC_CONFIG_HEADER([config.h])
AM_INIT_AUTOMAKE
-AC_CANONICAL_HOST
-
-case "$host_cpu" in
-i[[3456]]86) host_cpu=i386 ;;
-x86_64) host_cpu=x86_64 ;;
-*) AC_MSG_ERROR([unsupported CPU type]) ;;
-esac
-
-AC_SUBST(host_cpu)
-AC_SUBST(host_vendor)
-
-#
-# Options
-#
-
-AM_MAINTAINER_MODE
-if test "x$enable_maintainer_mode" = xyes; then
- AC_PATH_PROG(PERL,perl)
- if test -z "$PERL"; then
- AC_MSG_ERROR([perl not found])
- fi
-fi
-
-# This should be checked before AC_PROG_CC
-if test "x$CFLAGS" = x; then
- default_CFLAGS=yes
-fi
-
-if test "x$host_cpu" = xx86_64; then
- CFLAGS="-m32 $CFLAGS"
-fi
+CFLAGS="-m32 $CFLAGS"
#
# Programs
@@ -63,619 +33,16 @@
CCAS="$CC"
AC_SUBST(CCAS)
-AC_ARG_WITH(binutils,
- [ --with-binutils=DIR search the directory DIR to find binutils])
-
-if test "x$with_binutils" != x; then
-dnl AC_PATH_TOOL is not seen in autoconf 2.13, so use AC_PATH_PROG
-dnl instead for now. It is preferable when you cross-compile GRUB.
-dnl AC_PATH_TOOL(RANLIB, ranlib, :, "$with_binutils:$PATH")
- AC_PATH_PROG(RANLIB, ranlib, :, "$with_binutils:$PATH")
-else
- AC_PROG_RANLIB
-fi
-
-# optimization flags
-if test "x$ac_cv_prog_gcc" = xyes; then
- if test "x$default_CFLAGS" = xyes; then
- # Autoconf may set CFLAGS to -O2 and/or -g. So eliminate them.
- CFLAGS="`echo $CFLAGS | sed -e 's/-g//g' -e 's/-O[[0-9]]//g'` -g"
- # If the user specify the directory for binutils, add the option `-B'.
- if test "x$with_binutils" != x; then
- CFLAGS="-B$with_binutils/ $CFLAGS"
- fi
- STAGE1_CFLAGS="-O2"
- GRUB_CFLAGS="-O2"
- AC_CACHE_CHECK([whether optimization for size works], size_flag, [
- saved_CFLAGS=$CFLAGS
- CFLAGS="-Os -g"
- AC_TRY_COMPILE(, , size_flag=yes, size_flag=no)
- CFLAGS=$saved_CFLAGS
- ])
- if test "x$size_flag" = xyes; then
- STAGE2_CFLAGS="-Os"
- else
- STAGE2_CFLAGS="-O2 -fno-strength-reduce -fno-unroll-loops"
- fi
- # OpenBSD has a GCC extension for protecting applications from
- # stack smashing attacks, but GRUB doesn't want this feature.
- AC_CACHE_CHECK([whether gcc has -fno-stack-protector],
- no_stack_protector_flag, [
- saved_CFLAGS=$CFLAGS
- CFLAGS="-fno-stack-protector"
- AC_TRY_COMPILE(,
- ,
- no_stack_protector_flag=yes,
- no_stack_protector_flag=no)
- CFLAGS=$saved_CFLAGS
- ])
- if test "x$no_stack_protector_flag" = xyes; then
- STAGE2_CFLAGS="$STAGE2_CFLAGS -fno-stack-protector"
- fi
- fi
-fi
-
-AC_SUBST(STAGE1_CFLAGS)
-AC_SUBST(STAGE2_CFLAGS)
-AC_SUBST(GRUB_CFLAGS)
-
-# Enforce coding standards.
-CPPFLAGS="$CPPFLAGS -Wall -Wmissing-prototypes -Wunused -Wshadow"
-CPPFLAGS="$CPPFLAGS -Wpointer-arith"
-
-AC_CACHE_CHECK([whether -Wundef works], undef_flag, [
- saved_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="-Wundef"
- AC_TRY_COMPILE(, , undef_flag=yes, undef_flag=no)
- CPPFLAGS="$saved_CPPFLAGS"
-])
-
-# The options `-falign-*' are supported by gcc 3.0 or later.
-# Probably it is sufficient to only check for -falign-loops.
-AC_CACHE_CHECK([whether -falign-loops works], [falign_loop_flag], [
- saved_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="-falign-loops=1"
- AC_TRY_COMPILE(, , [falign_loop_flag=yes], [falign_loop_flag=no])
- CPPFLAGS="$saved_CPPFLAGS"
-])
-
-# Force no alignment to save space.
-if test "x$falign_loop_flag" = xyes; then
- CPPFLAGS="$CPPFLAGS -falign-jumps=1 -falign-loops=1 -falign-functions=1"
-else
- CPPFLAGS="$CPPFLAGS -malign-jumps=1 -malign-loops=1 -malign-functions=1"
-fi
-
-if test "x$undef_flag" = xyes; then
- CPPFLAGS="$CPPFLAGS -Wundef"
-fi
-
-# Check if build ID can be disabled in the linker
-AC_MSG_CHECKING([whether linker accepts `--build-id=none'])
-save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS -Wl,--build-id=none"
-AC_TRY_LINK(, , build_id_flag=yes, build_id_flag=no)
-AC_MSG_RESULT([$build_id_flag])
-LDFLAGS="$save_LDFLAGS"
-if test "x$build_id_flag" = xyes; then
- LDFLAGS="$LDFLAGS -Wl,--build-id=none"
-fi
-
-if test "x$with_binutils" != x; then
-dnl AC_PATH_TOOL(OBJCOPY, objcopy, , "$with_binutils:$PATH")
- AC_PATH_PROG(OBJCOPY, objcopy, , "$with_binutils:$PATH")
-else
- AC_CHECK_TOOL(OBJCOPY, objcopy)
-fi
-
-# Defined in acinclude.m4.
-grub_ASM_USCORE
-grub_PROG_OBJCOPY_ABSOLUTE
-if test "x$grub_cv_prog_objcopy_absolute" != xyes; then
- AC_MSG_ERROR([GRUB requires a working absolute objcopy; upgrade your
binutils])
-fi
-
-grub_ASM_PREFIX_REQUIREMENT
-
-grub_ASM_ADDR32
-if test "x$grub_cv_asm_addr32" != xyes; then
- AC_MSG_ERROR([GRUB requires GAS .code16 addr32 support; upgrade your
binutils])
-fi
-
-grub_ASM_ABSOLUTE_WITHOUT_ASTERISK
-
-grub_CHECK_START_SYMBOL
-grub_CHECK_USCORE_START_SYMBOL
-if test "x$grub_cv_check_start_symbol" != "xyes" \
- -a "x$grub_cv_check_uscore_start_symbol" != "xyes"; then
- AC_MSG_ERROR([Neither start nor _start is defined])
-fi
-
-grub_CHECK_USCORE_USCORE_BSS_START_SYMBOL
-grub_CHECK_USCORE_EDATA_SYMBOL
-grub_CHECK_EDATA_SYMBOL
-if test "x$grub_cv_check_uscore_uscore_bss_start_symbol" != "xyes" \
- -a "x$grub_cv_check_uscore_edata_symbol" != "xyes" \
- -a "x$grub_cv_check_edata_symbol" != "xyes"; then
- AC_MSG_ERROR([None of __bss_start, _edata, edata defined])
-fi
-
-grub_CHECK_END_SYMBOL
-grub_CHECK_USCORE_END_SYMBOL
-if test "x$grub_cv_check_end_symbol" != "xyes" \
- -a "x$grub_cv_check_uscore_end_symbol" != "xyes"; then
- AC_MSG_ERROR([Neither end nor _end is defined])
-fi
-
-# Check for curses libraries.
-AC_ARG_WITH(curses,
- [ --without-curses do not use curses])
-
-# Get the filename or the whole disk and open it.
-# Known to work on NetBSD.
-AC_CHECK_LIB(util, opendisk, [GRUB_LIBS="$GRUB_LIBS -lutil"
- AC_DEFINE(HAVE_OPENDISK, 1, [Define if opendisk() in -lutil can be used])])
-
-# Unless the user specify --without-curses, check for curses.
-if test "x$with_curses" != "xno"; then
- AC_CHECK_LIB(ncurses, wgetch, [GRUB_LIBS="$GRUB_LIBS -lncurses"
- AC_DEFINE(HAVE_LIBCURSES, 1, [Define if you have a curses library])],
- [AC_CHECK_LIB(curses, wgetch, [GRUB_LIBS="$GRUB_LIBS -lcurses"
- AC_DEFINE(HAVE_LIBCURSES, 1, [Define if you have a curses library])])])
-fi
-
-AC_SUBST(GRUB_LIBS)
-
-# Check for headers.
-AC_CHECK_HEADERS(string.h strings.h ncurses/curses.h ncurses.h curses.h)
-
-# Check for user options.
-
-# filesystems support.
-AC_ARG_ENABLE(ext2fs,
- [ --disable-ext2fs disable ext2fs support in Stage 2])
-
-if test x"$enable_ext2fs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_EXT2FS=1"
-fi
-
-AC_ARG_ENABLE(fat,
- [ --disable-fat disable FAT support in Stage 2])
-
-if test x"$enable_fat" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_FAT=1"
-fi
-
-AC_ARG_ENABLE(ffs,
- [ --disable-ffs disable FFS support in Stage 2])
-
-if test x"$enable_ffs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_FFS=1"
-fi
-
-AC_ARG_ENABLE(ufs2,
- [ --disable-ufs2 disable UFS2 support in Stage 2])
-
-if test x"$enable_ufs2" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_UFS2=1"
-fi
-
-AC_ARG_ENABLE(minix,
- [ --disable-minix disable Minix fs support in Stage 2])
-
-if test x"$enable_minix" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_MINIX=1"
-fi
-
-AC_ARG_ENABLE(reiserfs,
- [ --disable-reiserfs disable ReiserFS support in Stage 2])
-
-if test x"$enable_reiserfs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_REISERFS=1"
-fi
-
-AC_ARG_ENABLE(vstafs,
- [ --disable-vstafs disable VSTa FS support in Stage 2])
-
-if test x"$enable_vstafs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_VSTAFS=1"
-fi
-
-AC_ARG_ENABLE(jfs,
- [ --disable-jfs disable IBM JFS support in Stage 2])
-
-if test x"$enable_jfs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_JFS=1"
-fi
-
-AC_ARG_ENABLE(xfs,
- [ --disable-xfs disable SGI XFS support in Stage 2])
-
-if test x"$enable_xfs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_XFS=1"
-fi
-
-AC_ARG_ENABLE(iso9660,
- [ --disable-iso9660 disable ISO9660 support in Stage 2])
-
-if test x"$enable_iso9660" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_ISO9660=1"
-fi
-
-dnl AC_ARG_ENABLE(tftp,
-dnl [ --enable-tftp enable TFTP support in Stage 2])
-dnl
-dnl #if test x"$enable_tftp" = xyes; then
-dnl FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_TFTP=1"
-dnl fi
-
-AC_ARG_ENABLE(gunzip,
- [ --disable-gunzip disable decompression in Stage 2])
-
-if test x"$enable_gunzip" = xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DNO_DECOMPRESSION=1"
-fi
-
-AC_ARG_ENABLE(md5-password,
- [ --disable-md5-password disable MD5 password support in Stage 2])
-if test "x$enable_md5_password" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DUSE_MD5_PASSWORDS=1"
-fi
-
-dnl The netboot support.
-dnl General options.
-AC_ARG_ENABLE(packet-retransmission,
- [ --disable-packet-retransmission
- turn off packet retransmission])
-if test "x$enable_packet_retransmission" != xno; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONGESTED=1"
-fi
-
-AC_ARG_ENABLE(pci-direct,
- [ --enable-pci-direct access PCI directly instead of using BIOS])
-if test "x$enable_pci_direct" = xyes; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONFIG_PCI_DIRECT=1"
-fi
-
-dnl Device drivers.
-AC_ARG_ENABLE(3c509,
- [ --enable-3c509 enable 3Com509 driver])
-if test "x$enable_3c509" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C509"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c509.o"
-fi
-
-AC_ARG_ENABLE(3c529,
- [ --enable-3c529 enable 3Com529 driver])
-if test "x$enable_3c529" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C529=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c529.o"
-fi
-
-AC_ARG_ENABLE(3c595,
- [ --enable-3c595 enable 3Com595 driver])
-if test "x$enable_3c595" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C595=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c595.o"
-fi
-
-AC_ARG_ENABLE(3c90x,
- [ --enable-3c90x enable 3Com90x driver])
-if test "x$enable_3c90x" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C90X=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c90x.o"
-fi
-
-AC_ARG_ENABLE(cs89x0,
- [ --enable-cs89x0 enable CS89x0 driver])
-if test "x$enable_cs89x0" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_CS89X0=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS cs89x0.o"
-fi
-
-AC_ARG_ENABLE(davicom,
- [ --enable-davicom enable Davicom driver])
-if test "x$enable_davicom" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_DAVICOM=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS davicom.o"
-fi
-
-AC_ARG_ENABLE(depca,
- [ --enable-depca enable DEPCA and EtherWORKS driver])
-if test "x$enable_depca" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_DEPCA=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS depca.o"
-fi
-
-AC_ARG_ENABLE(eepro,
- [ --enable-eepro enable Etherexpress Pro/10 driver])
-if test "x$enable_eepro" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EEPRO=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS eepro.o"
-fi
-
-AC_ARG_ENABLE(eepro100,
- [ --enable-eepro100 enable Etherexpress Pro/100 driver])
-if test "x$enable_eepro100" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EEPRO100=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS eepro100.o"
-fi
-
-AC_ARG_ENABLE(epic100,
- [ --enable-epic100 enable SMC 83c170 EPIC/100 driver])
-if test "x$enable_epic100" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EPIC100=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS epic100.o"
-fi
-
-AC_ARG_ENABLE(3c507,
- [ --enable-3c507 enable 3Com507 driver])
-if test "x$enable_3c507" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C507=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c507.o"
-fi
-
-AC_ARG_ENABLE(exos205,
- [ --enable-exos205 enable EXOS205 driver])
-if test "x$enable_exos205" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EXOS205=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS exos205.o"
-fi
-
-AC_ARG_ENABLE(ni5210,
- [ --enable-ni5210 enable Racal-Interlan NI5210 driver])
-if test "x$enable_ni5210" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5210=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5210.o"
-fi
-
-AC_ARG_ENABLE(lance,
- [ --enable-lance enable Lance PCI PCNet/32 driver])
-if test "x$enable_lance" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_LANCE=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS lance.o"
-fi
-
-AC_ARG_ENABLE(ne2100,
- [ --enable-ne2100 enable Novell NE2100 driver])
-if test "x$enable_ne2100" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE2100=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne2100.o"
-fi
-
-AC_ARG_ENABLE(ni6510,
- [ --enable-ni6510 enable Racal-Interlan NI6510 driver])
-if test "x$enable_ni6510" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI6510=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni6510.o"
-fi
-
-AC_ARG_ENABLE(natsemi,
- [ --enable-natsemi enable NatSemi DP8381x driver])
-if test "x$enable_natsemi" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NATSEMI=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS natsemi.o"
-fi
-
-AC_ARG_ENABLE(ni5010,
- [ --enable-ni5010 enable Racal-Interlan NI5010 driver])
-if test "x$enable_ni5010" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5010=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5010.o"
-fi
-
-AC_ARG_ENABLE(3c503,
- [ --enable-3c503 enable 3Com503 driver])
-if test "x$enable_3c503" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C503=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c503.o"
-fi
-
-AC_ARG_ENABLE(ne,
- [ --enable-ne enable NE1000/2000 ISA driver])
-if test "x$enable_ne" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne.o"
-fi
-
-AC_ARG_ENABLE(ns8390,
- [ --enable-ns8390 enable NE2000 PCI driver])
-if test "x$enable_ns8390" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NS8390=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ns8390.o"
-fi
-
-AC_ARG_ENABLE(wd,
- [ --enable-wd enable WD8003/8013, SMC8216/8416 driver])
-if test "x$enable_wd" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_WD=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS wd.o"
-fi
-
-AC_ARG_ENABLE(otulip,
- [ --enable-otulip enable old Tulip driver])
-if test "x$enable_otulip" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_OTULIP=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS otulip.o"
-fi
-
-AC_ARG_ENABLE(rtl8139,
- [ --enable-rtl8139 enable Realtek 8139 driver])
-if test "x$enable_rtl8139" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_RTL8139=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS rtl8139.o"
-fi
-
-AC_ARG_ENABLE(sis900,
- [ --enable-sis900 enable SIS 900 and SIS 7016 driver])
-if test "x$enable_sis900" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SIS900=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS sis900.o"
-fi
-
-AC_ARG_ENABLE(sk-g16,
- [ --enable-sk-g16 enable Schneider and Koch G16 driver])
-if test "x$enable_sk_g16" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SK_G16=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS sk_g16.o"
-fi
-
-AC_ARG_ENABLE(smc9000,
- [ --enable-smc9000 enable SMC9000 driver])
-if test "x$enable_smc9000" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SMC9000=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS smc9000.o"
-fi
-
-AC_ARG_ENABLE(tiara,
- [ --enable-tiara enable Tiara driver])
-if test "x$enable_tiara" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TIARA=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS tiara.o"
-fi
-
-AC_ARG_ENABLE(tulip,
- [ --enable-tulip enable Tulip driver])
-if test "x$enable_tulip" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TULIP=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS tulip.o"
-fi
-
-AC_ARG_ENABLE(via-rhine,
- [ --enable-via-rhine enable Rhine-I/II driver])
-if test "x$enable_via_rhine" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_VIA_RHINE=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS via_rhine.o"
-fi
-
-AC_ARG_ENABLE(w89c840,
- [ --enable-w89c840 enable Winbond W89c840, Compex RL100-ATX driver])
-if test "x$enable_w89c840" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_W89C840=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS w89c840.o"
-fi
-
-dnl Check if the netboot support is turned on.
-AM_CONDITIONAL(NETBOOT_SUPPORT, test "x$NET_CFLAGS" != x)
-if test "x$NET_CFLAGS" != x; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_TFTP=1"
-fi
-
-dnl Extra options.
-AC_ARG_ENABLE(3c503-shmem,
- [ --enable-3c503-shmem use 3c503 shared memory mode])
-if test "x$enable_3c503_shmem" = xyes; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_SHMEM=1"
-fi
-
-AC_ARG_ENABLE(3c503-aui,
- [ --enable-3c503-aui use AUI by default on 3c503 cards])
-if test "x$enable_3c503_aui" = xyes; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_AUI=1"
-fi
-
-AC_ARG_ENABLE(compex-rl2000-fix,
- [ --enable-compex-rl2000-fix
- specify this if you have a Compex RL2000 PCI])
-if test "x$enable_compex_rl2000_fix" = xyes; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCOMPEX_RL2000_FIX=1"
-fi
-
-AC_ARG_ENABLE(smc9000-scan,
- [ --enable-smc9000-scan=LIST
- probe for SMC9000 I/O addresses using LIST],
- [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DSMC9000_SCAN=$enable_smc9000_scan"])
-
-AC_ARG_ENABLE(ne-scan,
- [ --enable-ne-scan=LIST probe for NE base address using LIST],
- [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DNE_SCAN=$enable_ne_scan"],
- [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DNE_SCAN=0x280,0x300,0x320,0x340"])
-
-AC_ARG_ENABLE(wd-default-mem,
- [ --enable-wd-default-mem=MEM
- set the default memory location for WD/SMC],
- [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=$enable_wd_default_mem"],
- [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=0xCC000"])
-
-AC_ARG_ENABLE(cs-scan,
- [ --enable-cs-scan=LIST probe for CS89x0 base address using LIST],
- [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCS_SCAN=$enable_cs_scan"])
-
-dnl Diskless
-AC_ARG_ENABLE(diskless,
- [ --enable-diskless enable diskless support])
-AM_CONDITIONAL(DISKLESS_SUPPORT, test "x$enable_diskless" = xyes)
-
-dnl Hercules terminal
-AC_ARG_ENABLE(hercules,
- [ --disable-hercules disable hercules terminal support])
-AM_CONDITIONAL(HERCULES_SUPPORT, test "x$enable_hercules" != xno)
-
-dnl Serial terminal
-AC_ARG_ENABLE(serial,
- [ --disable-serial disable serial terminal support])
-AM_CONDITIONAL(SERIAL_SUPPORT, test "x$enable_serial" != xno)
-
-dnl Simulation of the slowness of a serial device.
-AC_ARG_ENABLE(serial-speed-simulation,
- [ --enable-serial-speed-simulation
- simulate the slowness of a serial device])
-AM_CONDITIONAL(SERIAL_SPEED_SIMULATION,
- test "x$enable_serial_speed_simulation" = xyes)
-
-# Sanity check.
-if test "x$enable_diskless" = xyes; then
- if test "x$NET_CFLAGS" = x; then
- AC_MSG_ERROR([You must enable at least one network driver])
- fi
-fi
-
-dnl Embed a menu string in GRUB itself.
-AC_ARG_ENABLE(preset-menu,
- [ --enable-preset-menu=FILE
- preset a menu file FILE in Stage 2])
-if test "x$enable_preset_menu" = x; then
- :
-else
- if test -r $enable_preset_menu; then
- grub_DEFINE_FILE(PRESET_MENU_STRING, [$enable_preset_menu],
- [Define if there is user specified preset menu string])
- else
- AC_MSG_ERROR([Cannot read the preset menu file $enable_preset_menu])
- fi
-fi
-
dnl Build the example Multiboot kernel.
AC_ARG_ENABLE(example-kernel,
[ --enable-example-kernel
build the example Multiboot kernel])
AM_CONDITIONAL(BUILD_EXAMPLE_KERNEL, test "x$enable_example_kernel" = xyes)
-dnl Automatic Linux mem= option.
-AC_ARG_ENABLE(auto-linux-mem-opt,
- [ --disable-auto-linux-mem-opt
- don't pass Linux mem= option automatically])
-if test "x$enable_auto_linux_mem_opt" = xno; then
- :
-else
- AC_DEFINE(AUTO_LINUX_MEM_OPT, 1, [Define if you don't want to pass the mem=
option to Linux])
-fi
-
-dnl Now substitute the variables.
-AC_SUBST(FSYS_CFLAGS)
-AC_SUBST(NET_CFLAGS)
-AC_SUBST(NET_EXTRAFLAGS)
-AC_SUBST(NETBOOT_DRIVERS)
-
dnl Because recent automake complains about CCASFLAGS, set it here.
CCASFLAGS='$(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)'
AC_SUBST(CCASFLAGS)
-
dnl Output.
-AC_CONFIG_FILES([Makefile stage1/Makefile stage2/Makefile \
- docs/Makefile lib/Makefile util/Makefile \
- grub/Makefile netboot/Makefile util/grub-image \
- util/grub-install util/grub-md5-crypt \
- util/grub-terminfo util/grub-set-default])
+AC_CONFIG_FILES([Makefile docs/Makefile])
AC_OUTPUT
diff -Nur multiboot/docs/Makefile.am multiboot.good/docs/Makefile.am
--- multiboot/docs/Makefile.am 2006-06-24 16:40:02.000000000 +0200
+++ multiboot.good/docs/Makefile.am 2008-02-08 22:56:34.000000000 +0100
@@ -1,8 +1,6 @@
-info_TEXINFOS = grub.texi multiboot.texi
-grub_TEXINFOS = internals.texi fdl.texi
+info_TEXINFOS = multiboot.texi
EXAMPLES = boot.S kernel.c multiboot.h
multiboot_TEXINFOS = boot.S.texi kernel.c.texi multiboot.h.texi
-man_MANS = grub.8 mbchk.1 grub-install.8 grub-md5-crypt.8 grub-terminfo.8
HELP2MAN = help2man
SRC2TEXI = src2texi
noinst_SCRIPTS = $(HELP2MAN) $(SRC2TEXI)
@@ -35,31 +33,3 @@
%.S.texi: %.S $(srcdir)/$(SRC2TEXI)
$(SHELL) $(srcdir)/$(SRC2TEXI) $(srcdir) $< $@
-
-if MAINTAINER_MODE
-$(srcdir)/grub.8: ../grub/grub $(srcdir)/$(HELP2MAN)
- $(PERL) $(srcdir)/$(HELP2MAN) --name="the grub shell" \
- --section=8 --output=$@ $<
-
-$(srcdir)/grub-install.8: ../util/grub-install $(srcdir)/$(HELP2MAN)
- chmod 755 $<
- $(PERL) $(srcdir)/$(HELP2MAN) --name="install GRUB on your drive" \
- --section=8 --output=$@ $<
-
-$(srcdir)/mbchk.1: ../util/mbchk $(srcdir)/$(HELP2MAN)
- $(PERL) $(srcdir)/$(HELP2MAN) \
- --name="check the format of a Multiboot kernel" \
- --section=1 --output=$@ $<
-
-$(srcdir)/grub-md5-crypt.8: ../util/grub-md5-crypt $(srcdir)/$(HELP2MAN)
- chmod 755 $<
- $(PERL) $(srcdir)/$(HELP2MAN) \
- --name="Encrypt a password in MD5 format" \
- --section=8 --output=$@ $<
-
-$(srcdir)/grub-terminfo.8: ../util/grub-terminfo $(srcdir)/$(HELP2MAN)
- chmod 755 $<
- $(PERL) $(srcdir)/$(HELP2MAN) \
- --name="Generate a terminfo command from a terminfo name" \
- --section=8 --output=$@ $<
-endif
diff -Nur multiboot/Makefile.am multiboot.good/Makefile.am
--- multiboot/Makefile.am 2004-04-23 15:39:01.000000000 +0200
+++ multiboot.good/Makefile.am 2008-02-08 23:01:07.000000000 +0100
@@ -1,4 +1,3 @@
# Do not change this order if you don't know what you are doing.
AUTOMAKE_OPTIONS = 1.7 gnu
-SUBDIRS = netboot stage2 stage1 lib grub util docs
-EXTRA_DIST = BUGS MAINTENANCE
+SUBDIRS = docs
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
http://lists.gnu.org/mailman/listinfo/grub-devel
